[v5,6/6] arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
diff mbox series

Message ID 20190423083354.17785-7-gregory.clement@bootlin.com
State New
Headers show
Series
  • Add CPU clock support for Armada 7K/8K
Related show

Commit Message

Gregory CLEMENT April 23, 2019, 8:33 a.m. UTC
Add cpu clock node on AP

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi | 4 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 7 +++++++
 2 files changed, 11 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 2baafe12ebd4..472211159979 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -20,24 +20,28 @@ 
 			compatible = "arm,cortex-a72";
 			reg = <0x000>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x001>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 0>;
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
+			clocks = <&cpu_clk 1>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 91dad7e4ee59..2db27c89427b 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -280,6 +280,13 @@ 
 				#address-cells = <1>;
 				#size-cells = <1>;
 
+				cpu_clk: clock-cpu@0 {
+					compatible = "marvell,ap806-cpu-clock";
+					clocks = <&ap_clk 0>, <&ap_clk 1>;
+					#clock-cells = <1>;
+					reg = <0x0 0x1000>;
+				};
+
 				ap_thermal: thermal-sensor@80 {
 					compatible = "marvell,armada-ap806-thermal";
 					reg = <0x80 0x10>;