[1/1] iscsi target: fix discovery auth enforcement
diff mbox series

Message ID 20190424015216.16757-1-mchristi@redhat.com
State New, archived
Headers show
Series
  • [1/1] iscsi target: fix discovery auth enforcement
Related show

Commit Message

Mike Christie April 24, 2019, 1:52 a.m. UTC
If the user writes 0 to enforce_discovery_auth to disable CHAP during
discovery we will set the AuthMethod arguments to CHAP,None even if
there are no CHAP settings. The initiator can then only login if it has
its AuthMethod set to only None. If it is set to CHAP,None, login will
fail, because the target sees CHAP and will try to do that, but it will
always fail since there are no CHAP settings setup.

This has us use CHAP,None if CHAP is setup when writing 0 to
enforce_discovery_auth file and None if CHAP is not setup.

Signed-off-by: Mike Christie <mchristi@redhat.com>
---
 drivers/target/iscsi/iscsi_target_configfs.c | 24 ++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

Comments

Mike Christie April 24, 2019, 3:23 p.m. UTC | #1
Martin, Do not merge this patch. I am going to self nack it. It could
add a regression where CHAP is not used if an app initializes this file
to 0 during loading before it has setup CHAP then later sets up CHAP
assuming we would use CHAP,None.

On 04/23/2019 08:52 PM, Mike Christie wrote:
> If the user writes 0 to enforce_discovery_auth to disable CHAP during
> discovery we will set the AuthMethod arguments to CHAP,None even if
> there are no CHAP settings. The initiator can then only login if it has
> its AuthMethod set to only None. If it is set to CHAP,None, login will
> fail, because the target sees CHAP and will try to do that, but it will
> always fail since there are no CHAP settings setup.
> 
> This has us use CHAP,None if CHAP is setup when writing 0 to
> enforce_discovery_auth file and None if CHAP is not setup.
> 
> Signed-off-by: Mike Christie <mchristi@redhat.com>
> ---
>  drivers/target/iscsi/iscsi_target_configfs.c | 24 ++++++++++++++++----
>  1 file changed, 20 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
> index cac94c94ef5d..bfc4a7966a2d 100644
> --- a/drivers/target/iscsi/iscsi_target_configfs.c
> +++ b/drivers/target/iscsi/iscsi_target_configfs.c
> @@ -1276,6 +1276,7 @@ static ssize_t iscsi_disc_enforce_discovery_auth_store(struct config_item *item,
>  {
>  	struct iscsi_param *param;
>  	struct iscsi_portal_group *discovery_tpg = iscsit_global->discovery_tpg;
> +	struct iscsi_node_auth *auth = &iscsit_global->discovery_acl.node_auth;
>  	u32 op;
>  	int err;
>  
> @@ -1306,19 +1307,34 @@ static ssize_t iscsi_disc_enforce_discovery_auth_store(struct config_item *item,
>  			return -EINVAL;
>  
>  		discovery_tpg->tpg_attrib.authentication = 1;
> -		iscsit_global->discovery_acl.node_auth.enforce_discovery_auth = 1;
> +		auth->enforce_discovery_auth = 1;
>  		pr_debug("LIO-CORE[0] Successfully enabled"
>  			" authentication enforcement for iSCSI"
>  			" Discovery TPG\n");
> -	} else {
> +	} else if ((auth->naf_flags & NAF_USERID_SET &&
> +		   auth->naf_flags & NAF_PASSWORD_SET) ||
> +		   (auth->naf_flags & NAF_USERID_IN_SET &&
> +		   auth->naf_flags & NAF_PASSWORD_IN_SET)) {
>  		/*
> -		 * Reset the AuthMethod key to CHAP,None
> +		 * Partially disable. Reset AuthMethod key to CHAP,None
>  		 */
>  		if (iscsi_update_param_value(param, "CHAP,None") < 0)
>  			return -EINVAL;
>  
>  		discovery_tpg->tpg_attrib.authentication = 0;
> -		iscsit_global->discovery_acl.node_auth.enforce_discovery_auth = 0;
> +		auth->enforce_discovery_auth = 0;
> +		pr_debug("LIO-CORE[0] Partially disabled"
> +			" authentication enforcement for iSCSI"
> +			" Discovery TPG\n");
> +	} else {
> +		/*
> +		 * Fully disable. Reset AuthMethod key to None
> +		 */
> +		if (iscsi_update_param_value(param, "None") < 0)
> +			return -EINVAL;
> +
> +		discovery_tpg->tpg_attrib.authentication = 0;
> +		auth->enforce_discovery_auth = 0;
>  		pr_debug("LIO-CORE[0] Successfully disabled"
>  			" authentication enforcement for iSCSI"
>  			" Discovery TPG\n");
>

Patch
diff mbox series

diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index cac94c94ef5d..bfc4a7966a2d 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -1276,6 +1276,7 @@  static ssize_t iscsi_disc_enforce_discovery_auth_store(struct config_item *item,
 {
 	struct iscsi_param *param;
 	struct iscsi_portal_group *discovery_tpg = iscsit_global->discovery_tpg;
+	struct iscsi_node_auth *auth = &iscsit_global->discovery_acl.node_auth;
 	u32 op;
 	int err;
 
@@ -1306,19 +1307,34 @@  static ssize_t iscsi_disc_enforce_discovery_auth_store(struct config_item *item,
 			return -EINVAL;
 
 		discovery_tpg->tpg_attrib.authentication = 1;
-		iscsit_global->discovery_acl.node_auth.enforce_discovery_auth = 1;
+		auth->enforce_discovery_auth = 1;
 		pr_debug("LIO-CORE[0] Successfully enabled"
 			" authentication enforcement for iSCSI"
 			" Discovery TPG\n");
-	} else {
+	} else if ((auth->naf_flags & NAF_USERID_SET &&
+		   auth->naf_flags & NAF_PASSWORD_SET) ||
+		   (auth->naf_flags & NAF_USERID_IN_SET &&
+		   auth->naf_flags & NAF_PASSWORD_IN_SET)) {
 		/*
-		 * Reset the AuthMethod key to CHAP,None
+		 * Partially disable. Reset AuthMethod key to CHAP,None
 		 */
 		if (iscsi_update_param_value(param, "CHAP,None") < 0)
 			return -EINVAL;
 
 		discovery_tpg->tpg_attrib.authentication = 0;
-		iscsit_global->discovery_acl.node_auth.enforce_discovery_auth = 0;
+		auth->enforce_discovery_auth = 0;
+		pr_debug("LIO-CORE[0] Partially disabled"
+			" authentication enforcement for iSCSI"
+			" Discovery TPG\n");
+	} else {
+		/*
+		 * Fully disable. Reset AuthMethod key to None
+		 */
+		if (iscsi_update_param_value(param, "None") < 0)
+			return -EINVAL;
+
+		discovery_tpg->tpg_attrib.authentication = 0;
+		auth->enforce_discovery_auth = 0;
 		pr_debug("LIO-CORE[0] Successfully disabled"
 			" authentication enforcement for iSCSI"
 			" Discovery TPG\n");