diff mbox series

[v6,4/5] nvmem: imx-ocotp: Add i.MX8MM support

Message ID 20190503165342.30139-5-pure.logic@nexus-software.ie (mailing list archive)
State New, archived
Headers show
Series Add i.MX8MM OCOTP support | expand

Commit Message

Bryan O'Donoghue May 3, 2019, 4:53 p.m. UTC 
This patch adds support to burn the fuses on the i.MX8MM.
https://www.nxp.com/webapp/Download?colCode=IMX8MMRM

The i.MX8MM is similar to i.MX6 processors in terms of addressing and clock
setup.

The documentation specifies 60 discreet OTP registers but, the fusemap
address space encompasses up to 256 registers. We map the entire putative
256 OTP registers.

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
---
 drivers/nvmem/imx-ocotp.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 2c5009691dd6..189fd5f334f4 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -479,6 +479,12 @@  static const struct ocotp_params imx8mq_params = {
 	.set_timing = imx_ocotp_set_imx7_timing,
 };
 
+static const struct ocotp_params imx8mm_params = {
+	.nregs = 256,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+};
+
 static const struct of_device_id imx_ocotp_dt_ids[] = {
 	{ .compatible = "fsl,imx6q-ocotp",  .data = &imx6q_params },
 	{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
@@ -489,6 +495,7 @@  static const struct of_device_id imx_ocotp_dt_ids[] = {
 	{ .compatible = "fsl,imx6sll-ocotp", .data = &imx6sll_params },
 	{ .compatible = "fsl,imx7ulp-ocotp", .data = &imx7ulp_params },
 	{ .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params },
+	{ .compatible = "fsl,imx8mm-ocotp", .data = &imx8mm_params },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);