[v2,1/7] s390: vfio-ap: wait for queue empty on queue reset
diff mbox series

Message ID 1556918073-13171-2-git-send-email-akrowiak@linux.ibm.com
State New
Headers show
Series
  • s390: vfio-ap: dynamic configuration support
Related show

Commit Message

Tony Krowiak May 3, 2019, 9:14 p.m. UTC
Refactors the AP queue reset function to wait until the queue is empty
after the PQAP(ZAPQ) instruction is executed to zero out the queue as
required by the AP architecture.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
---
 drivers/s390/crypto/vfio_ap_ops.c | 35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

Comments

Pierre Morel May 6, 2019, 6:41 a.m. UTC | #1
On 03/05/2019 23:14, Tony Krowiak wrote:
> Refactors the AP queue reset function to wait until the queue is empty
> after the PQAP(ZAPQ) instruction is executed to zero out the queue as
> required by the AP architecture.
> 
> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
> ---
>   drivers/s390/crypto/vfio_ap_ops.c | 35 ++++++++++++++++++++++++++++++++---
>   1 file changed, 32 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
> index 900b9cf20ca5..b88a2a2ba075 100644
> --- a/drivers/s390/crypto/vfio_ap_ops.c
> +++ b/drivers/s390/crypto/vfio_ap_ops.c
> @@ -271,6 +271,32 @@ static int vfio_ap_mdev_verify_no_sharing(struct ap_matrix_mdev *matrix_mdev)
>   	return 0;
>   }
>   
> +static void vfio_ap_mdev_wait_for_qempty(unsigned long apid, unsigned long apqi)
> +{
> +	struct ap_queue_status status;
> +	ap_qid_t qid = AP_MKQID(apid, apqi);
> +	int retry = 5;
> +
> +	do {
> +		status = ap_tapq(qid, NULL);
> +		switch (status.response_code) {
> +		case AP_RESPONSE_NORMAL:
> +			if (status.queue_empty)
> +				return;
> +			msleep(20);

NIT: 	Fall through ?

> +			break;
> +		case AP_RESPONSE_RESET_IN_PROGRESS:
> +		case AP_RESPONSE_BUSY:
> +			msleep(20);
> +			break;
> +		default:
> +			pr_warn("%s: tapq err %02x: %04lx.%02lx may not be empty\n",
> +				__func__, status.response_code, apid, apqi);

I do not thing the warning sentence is appropriate:
The only possible errors here are if the AP is not available due to AP 
checkstop, deconfigured AP or invalid APQN.


> +			return;
> +		}
> +	} while (--retry);
> +}
> +
>   /**
>    * assign_adapter_store
>    *
> @@ -790,15 +816,18 @@ static int vfio_ap_mdev_group_notifier(struct notifier_block *nb,
>   	return NOTIFY_OK;
>   }
>   
> -static int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int apqi,
> -				    unsigned int retry)
> +int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int apqi)
>   {
>   	struct ap_queue_status status;
> +	int retry = 5;
>   
>   	do {
>   		status = ap_zapq(AP_MKQID(apid, apqi));
>   		switch (status.response_code) {
>   		case AP_RESPONSE_NORMAL:
> +			vfio_ap_mdev_wait_for_qempty(apid, apqi);
> +			return 0;
> +		case AP_RESPONSE_DECONFIGURED:

Since you modify the switch, you can return for all the following cases:
AP_RESPONSE_DECONFIGURE
..._CHECKSTOP
..._INVALID_APQN


And you should wait for qempty on AP_RESET_IN_PROGRESS along with 
AP_RESPONSE_NORMAL

>   			return 0;
>   		case AP_RESPONSE_RESET_IN_PROGRESS:
>   		case AP_RESPONSE_BUSY:

While at modifying this function, the AP_RESPONSE_BUSY is not a valid 
code for ZAPQ, you can remove this.

> @@ -824,7 +853,7 @@ static int vfio_ap_mdev_reset_queues(struct mdev_device *mdev)
>   			     matrix_mdev->matrix.apm_max + 1) {
>   		for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm,
>   				     matrix_mdev->matrix.aqm_max + 1) {
> -			ret = vfio_ap_mdev_reset_queue(apid, apqi, 1);
> +			ret = vfio_ap_mdev_reset_queue(apid, apqi);

IMHO, since you are at changing this call, passing the apqn as parameter 
would be a good simplification.



>   			/*
>   			 * Regardless whether a queue turns out to be busy, or
>   			 * is not operational, we need to continue resetting

Depends on why the reset failed, but this is out of scope.

>
Tony Krowiak May 6, 2019, 7:37 p.m. UTC | #2
On 5/6/19 2:41 AM, Pierre Morel wrote:
> On 03/05/2019 23:14, Tony Krowiak wrote:
>> Refactors the AP queue reset function to wait until the queue is empty
>> after the PQAP(ZAPQ) instruction is executed to zero out the queue as
>> required by the AP architecture.
>>
>> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
>> ---
>>   drivers/s390/crypto/vfio_ap_ops.c | 35 
>> ++++++++++++++++++++++++++++++++---
>>   1 file changed, 32 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/s390/crypto/vfio_ap_ops.c 
>> b/drivers/s390/crypto/vfio_ap_ops.c
>> index 900b9cf20ca5..b88a2a2ba075 100644
>> --- a/drivers/s390/crypto/vfio_ap_ops.c
>> +++ b/drivers/s390/crypto/vfio_ap_ops.c
>> @@ -271,6 +271,32 @@ static int vfio_ap_mdev_verify_no_sharing(struct 
>> ap_matrix_mdev *matrix_mdev)
>>       return 0;
>>   }
>> +static void vfio_ap_mdev_wait_for_qempty(unsigned long apid, unsigned 
>> long apqi)
>> +{
>> +    struct ap_queue_status status;
>> +    ap_qid_t qid = AP_MKQID(apid, apqi);
>> +    int retry = 5;
>> +
>> +    do {
>> +        status = ap_tapq(qid, NULL);
>> +        switch (status.response_code) {
>> +        case AP_RESPONSE_NORMAL:
>> +            if (status.queue_empty)
>> +                return;
>> +            msleep(20);
> 
> NIT:     Fall through ?

Yes

> 
>> +            break;
>> +        case AP_RESPONSE_RESET_IN_PROGRESS:
>> +        case AP_RESPONSE_BUSY:
>> +            msleep(20);
>> +            break;
>> +        default:
>> +            pr_warn("%s: tapq err %02x: %04lx.%02lx may not be empty\n",
>> +                __func__, status.response_code, apid, apqi);
> 
> I do not thing the warning sentence is appropriate:
> The only possible errors here are if the AP is not available due to AP 
> checkstop, deconfigured AP or invalid APQN.

Right you are! I'll work on a new message.

> 
> 
>> +            return;
>> +        }
>> +    } while (--retry);
>> +}
>> +
>>   /**
>>    * assign_adapter_store
>>    *
>> @@ -790,15 +816,18 @@ static int vfio_ap_mdev_group_notifier(struct 
>> notifier_block *nb,
>>       return NOTIFY_OK;
>>   }
>> -static int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int 
>> apqi,
>> -                    unsigned int retry)
>> +int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int apqi)
>>   {
>>       struct ap_queue_status status;
>> +    int retry = 5;
>>       do {
>>           status = ap_zapq(AP_MKQID(apid, apqi));
>>           switch (status.response_code) {
>>           case AP_RESPONSE_NORMAL:
>> +            vfio_ap_mdev_wait_for_qempty(apid, apqi);
>> +            return 0;
>> +        case AP_RESPONSE_DECONFIGURED:
> 
> Since you modify the switch, you can return for all the following cases:
> AP_RESPONSE_DECONFIGURE
> ..._CHECKSTOP
> ..._INVALID_APQN
> 
> 
> And you should wait for qempty on AP_RESET_IN_PROGRESS along with 
> AP_RESPONSE_NORMAL

If a queue reset is in progress, we retry the zapq. Are you saying we
should wait for qempty then reissue the zapq?

> 
>>               return 0;
>>           case AP_RESPONSE_RESET_IN_PROGRESS:
>>           case AP_RESPONSE_BUSY:
> 
> While at modifying this function, the AP_RESPONSE_BUSY is not a valid 
> code for ZAPQ, you can remove this.

Okay

> 
>> @@ -824,7 +853,7 @@ static int vfio_ap_mdev_reset_queues(struct 
>> mdev_device *mdev)
>>                    matrix_mdev->matrix.apm_max + 1) {
>>           for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm,
>>                        matrix_mdev->matrix.aqm_max + 1) {
>> -            ret = vfio_ap_mdev_reset_queue(apid, apqi, 1);
>> +            ret = vfio_ap_mdev_reset_queue(apid, apqi);
> 
> IMHO, since you are at changing this call, passing the apqn as parameter 
> would be a good simplification.

Okay.

> 
> 
> 
>>               /*
>>                * Regardless whether a queue turns out to be busy, or
>>                * is not operational, we need to continue resetting
> 
> Depends on why the reset failed, but this is out of scope.

I'm not sure what you mean by out of scope here, but you do make a valid
point. If the response code for the zapq is AP_RESPONSE_DECONFIGURED,
there is probably no sense in continuing to reset queues for that
particular adapter. I'll consider a change here.

> 
>>
> 
>
Pierre Morel May 7, 2019, 8:10 a.m. UTC | #3
On 06/05/2019 21:37, Tony Krowiak wrote:
> On 5/6/19 2:41 AM, Pierre Morel wrote:
>> On 03/05/2019 23:14, Tony Krowiak wrote:
>>> Refactors the AP queue reset function to wait until the queue is empty
>>> after the PQAP(ZAPQ) instruction is executed to zero out the queue as
>>> required by the AP architecture.
>>>
>>> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
>>> ---
>>>   drivers/s390/crypto/vfio_ap_ops.c | 35 
>>> ++++++++++++++++++++++++++++++++---
>>>   1 file changed, 32 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/s390/crypto/vfio_ap_ops.c 
>>> b/drivers/s390/crypto/vfio_ap_ops.c
>>> index 900b9cf20ca5..b88a2a2ba075 100644
>>> --- a/drivers/s390/crypto/vfio_ap_ops.c
>>> +++ b/drivers/s390/crypto/vfio_ap_ops.c
>>> @@ -271,6 +271,32 @@ static int vfio_ap_mdev_verify_no_sharing(struct 
>>> ap_matrix_mdev *matrix_mdev)
>>>       return 0;
>>>   }
>>> +static void vfio_ap_mdev_wait_for_qempty(unsigned long apid, 
>>> unsigned long apqi)
>>> +{
>>> +    struct ap_queue_status status;
>>> +    ap_qid_t qid = AP_MKQID(apid, apqi);
>>> +    int retry = 5;
>>> +
>>> +    do {
>>> +        status = ap_tapq(qid, NULL);
>>> +        switch (status.response_code) {
>>> +        case AP_RESPONSE_NORMAL:
>>> +            if (status.queue_empty)
>>> +                return;
>>> +            msleep(20);
>>
>> NIT:     Fall through ?
> 
> Yes
> 
>>
>>> +            break;
>>> +        case AP_RESPONSE_RESET_IN_PROGRESS:
>>> +        case AP_RESPONSE_BUSY:
>>> +            msleep(20);
>>> +            break;
>>> +        default:
>>> +            pr_warn("%s: tapq err %02x: %04lx.%02lx may not be 
>>> empty\n",
>>> +                __func__, status.response_code, apid, apqi);
>>
>> I do not thing the warning sentence is appropriate:
>> The only possible errors here are if the AP is not available due to AP 
>> checkstop, deconfigured AP or invalid APQN.
> 
> Right you are! I'll work on a new message.
> 
>>
>>
>>> +            return;
>>> +        }
>>> +    } while (--retry);
>>> +}
>>> +
>>>   /**
>>>    * assign_adapter_store
>>>    *
>>> @@ -790,15 +816,18 @@ static int vfio_ap_mdev_group_notifier(struct 
>>> notifier_block *nb,
>>>       return NOTIFY_OK;
>>>   }
>>> -static int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int 
>>> apqi,
>>> -                    unsigned int retry)
>>> +int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int apqi)
>>>   {
>>>       struct ap_queue_status status;
>>> +    int retry = 5;
>>>       do {
>>>           status = ap_zapq(AP_MKQID(apid, apqi));
>>>           switch (status.response_code) {
>>>           case AP_RESPONSE_NORMAL:
>>> +            vfio_ap_mdev_wait_for_qempty(apid, apqi);
>>> +            return 0;
>>> +        case AP_RESPONSE_DECONFIGURED:
>>
>> Since you modify the switch, you can return for all the following cases:
>> AP_RESPONSE_DECONFIGURE
>> ..._CHECKSTOP
>> ..._INVALID_APQN
>>
>>
>> And you should wait for qempty on AP_RESET_IN_PROGRESS along with 
>> AP_RESPONSE_NORMAL
> 
> If a queue reset is in progress, we retry the zapq. Are you saying we
> should wait for qempty then reissue the zapq?


Yes, I fear that if we reissue the zapq while RESET is in progress we 
could fall in a loop depending on the reset hardware time and the 
software retry .

> 
>>
>>>               return 0;
>>>           case AP_RESPONSE_RESET_IN_PROGRESS:
>>>           case AP_RESPONSE_BUSY:
>>
>> While at modifying this function, the AP_RESPONSE_BUSY is not a valid 
>> code for ZAPQ, you can remove this.
> 
> Okay
> 
>>
>>> @@ -824,7 +853,7 @@ static int vfio_ap_mdev_reset_queues(struct 
>>> mdev_device *mdev)
>>>                    matrix_mdev->matrix.apm_max + 1) {
>>>           for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm,
>>>                        matrix_mdev->matrix.aqm_max + 1) {
>>> -            ret = vfio_ap_mdev_reset_queue(apid, apqi, 1);
>>> +            ret = vfio_ap_mdev_reset_queue(apid, apqi);
>>
>> IMHO, since you are at changing this call, passing the apqn as 
>> parameter would be a good simplification.
> 
> Okay.

Sorry, I should have add: NIT.

> 
>>
>>
>>
>>>               /*
>>>                * Regardless whether a queue turns out to be busy, or
>>>                * is not operational, we need to continue resetting
>>
>> Depends on why the reset failed, but this is out of scope.
> 
> I'm not sure what you mean by out of scope here, but you do make a valid
> point. If the response code for the zapq is AP_RESPONSE_DECONFIGURED,
> there is probably no sense in continuing to reset queues for that
> particular adapter. I'll consider a change here.

Yes, this was the point, but I consider this as a enhancement, trying a 
reset on bad queues AFAIK do no arm.

> 
>>
>>>
>>
>>
>
Tony Krowiak May 7, 2019, 3:12 p.m. UTC | #4
On 5/7/19 4:10 AM, Pierre Morel wrote:
> On 06/05/2019 21:37, Tony Krowiak wrote:
>> On 5/6/19 2:41 AM, Pierre Morel wrote:
>>> On 03/05/2019 23:14, Tony Krowiak wrote:
>>>> Refactors the AP queue reset function to wait until the queue is empty
>>>> after the PQAP(ZAPQ) instruction is executed to zero out the queue as
>>>> required by the AP architecture.
>>>>
>>>> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
>>>> ---
>>>>   drivers/s390/crypto/vfio_ap_ops.c | 35 
>>>> ++++++++++++++++++++++++++++++++---
>>>>   1 file changed, 32 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/drivers/s390/crypto/vfio_ap_ops.c 
>>>> b/drivers/s390/crypto/vfio_ap_ops.c
>>>> index 900b9cf20ca5..b88a2a2ba075 100644
>>>> --- a/drivers/s390/crypto/vfio_ap_ops.c
>>>> +++ b/drivers/s390/crypto/vfio_ap_ops.c
>>>> @@ -271,6 +271,32 @@ static int 
>>>> vfio_ap_mdev_verify_no_sharing(struct ap_matrix_mdev *matrix_mdev)
>>>>       return 0;
>>>>   }
>>>> +static void vfio_ap_mdev_wait_for_qempty(unsigned long apid, 
>>>> unsigned long apqi)
>>>> +{
>>>> +    struct ap_queue_status status;
>>>> +    ap_qid_t qid = AP_MKQID(apid, apqi);
>>>> +    int retry = 5;
>>>> +
>>>> +    do {
>>>> +        status = ap_tapq(qid, NULL);
>>>> +        switch (status.response_code) {
>>>> +        case AP_RESPONSE_NORMAL:
>>>> +            if (status.queue_empty)
>>>> +                return;
>>>> +            msleep(20);
>>>
>>> NIT:     Fall through ?
>>
>> Yes
>>
>>>
>>>> +            break;
>>>> +        case AP_RESPONSE_RESET_IN_PROGRESS:
>>>> +        case AP_RESPONSE_BUSY:
>>>> +            msleep(20);
>>>> +            break;
>>>> +        default:
>>>> +            pr_warn("%s: tapq err %02x: %04lx.%02lx may not be 
>>>> empty\n",
>>>> +                __func__, status.response_code, apid, apqi);
>>>
>>> I do not thing the warning sentence is appropriate:
>>> The only possible errors here are if the AP is not available due to 
>>> AP checkstop, deconfigured AP or invalid APQN.
>>
>> Right you are! I'll work on a new message.
>>
>>>
>>>
>>>> +            return;
>>>> +        }
>>>> +    } while (--retry);
>>>> +}
>>>> +
>>>>   /**
>>>>    * assign_adapter_store
>>>>    *
>>>> @@ -790,15 +816,18 @@ static int vfio_ap_mdev_group_notifier(struct 
>>>> notifier_block *nb,
>>>>       return NOTIFY_OK;
>>>>   }
>>>> -static int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int 
>>>> apqi,
>>>> -                    unsigned int retry)
>>>> +int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int apqi)
>>>>   {
>>>>       struct ap_queue_status status;
>>>> +    int retry = 5;
>>>>       do {
>>>>           status = ap_zapq(AP_MKQID(apid, apqi));
>>>>           switch (status.response_code) {
>>>>           case AP_RESPONSE_NORMAL:
>>>> +            vfio_ap_mdev_wait_for_qempty(apid, apqi);
>>>> +            return 0;
>>>> +        case AP_RESPONSE_DECONFIGURED:
>>>
>>> Since you modify the switch, you can return for all the following cases:
>>> AP_RESPONSE_DECONFIGURE
>>> ..._CHECKSTOP
>>> ..._INVALID_APQN
>>>
>>>
>>> And you should wait for qempty on AP_RESET_IN_PROGRESS along with 
>>> AP_RESPONSE_NORMAL
>>
>> If a queue reset is in progress, we retry the zapq. Are you saying we
>> should wait for qempty then reissue the zapq?
> 
> 
> Yes, I fear that if we reissue the zapq while RESET is in progress we 
> could fall in a loop depending on the reset hardware time and the 
> software retry .

I already did this in the forthcoming v4 series.

> 
>>
>>>
>>>>               return 0;
>>>>           case AP_RESPONSE_RESET_IN_PROGRESS:
>>>>           case AP_RESPONSE_BUSY:
>>>
>>> While at modifying this function, the AP_RESPONSE_BUSY is not a valid 
>>> code for ZAPQ, you can remove this.
>>
>> Okay
>>
>>>
>>>> @@ -824,7 +853,7 @@ static int vfio_ap_mdev_reset_queues(struct 
>>>> mdev_device *mdev)
>>>>                    matrix_mdev->matrix.apm_max + 1) {
>>>>           for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm,
>>>>                        matrix_mdev->matrix.aqm_max + 1) {
>>>> -            ret = vfio_ap_mdev_reset_queue(apid, apqi, 1);
>>>> +            ret = vfio_ap_mdev_reset_queue(apid, apqi);
>>>
>>> IMHO, since you are at changing this call, passing the apqn as 
>>> parameter would be a good simplification.
>>
>> Okay.
> 
> Sorry, I should have add: NIT.
> 
>>
>>>
>>>
>>>
>>>>               /*
>>>>                * Regardless whether a queue turns out to be busy, or
>>>>                * is not operational, we need to continue resetting
>>>
>>> Depends on why the reset failed, but this is out of scope.
>>
>> I'm not sure what you mean by out of scope here, but you do make a valid
>> point. If the response code for the zapq is AP_RESPONSE_DECONFIGURED,
>> there is probably no sense in continuing to reset queues for that
>> particular adapter. I'll consider a change here.
> 
> Yes, this was the point, but I consider this as a enhancement, trying a 
> reset on bad queues AFAIK do no arm.

I included the enhancement in the forthcoming v4 series.

> 
>>
>>>
>>>>
>>>
>>>
>>
> 
>

Patch
diff mbox series

diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 900b9cf20ca5..b88a2a2ba075 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -271,6 +271,32 @@  static int vfio_ap_mdev_verify_no_sharing(struct ap_matrix_mdev *matrix_mdev)
 	return 0;
 }
 
+static void vfio_ap_mdev_wait_for_qempty(unsigned long apid, unsigned long apqi)
+{
+	struct ap_queue_status status;
+	ap_qid_t qid = AP_MKQID(apid, apqi);
+	int retry = 5;
+
+	do {
+		status = ap_tapq(qid, NULL);
+		switch (status.response_code) {
+		case AP_RESPONSE_NORMAL:
+			if (status.queue_empty)
+				return;
+			msleep(20);
+			break;
+		case AP_RESPONSE_RESET_IN_PROGRESS:
+		case AP_RESPONSE_BUSY:
+			msleep(20);
+			break;
+		default:
+			pr_warn("%s: tapq err %02x: %04lx.%02lx may not be empty\n",
+				__func__, status.response_code, apid, apqi);
+			return;
+		}
+	} while (--retry);
+}
+
 /**
  * assign_adapter_store
  *
@@ -790,15 +816,18 @@  static int vfio_ap_mdev_group_notifier(struct notifier_block *nb,
 	return NOTIFY_OK;
 }
 
-static int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int apqi,
-				    unsigned int retry)
+int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int apqi)
 {
 	struct ap_queue_status status;
+	int retry = 5;
 
 	do {
 		status = ap_zapq(AP_MKQID(apid, apqi));
 		switch (status.response_code) {
 		case AP_RESPONSE_NORMAL:
+			vfio_ap_mdev_wait_for_qempty(apid, apqi);
+			return 0;
+		case AP_RESPONSE_DECONFIGURED:
 			return 0;
 		case AP_RESPONSE_RESET_IN_PROGRESS:
 		case AP_RESPONSE_BUSY:
@@ -824,7 +853,7 @@  static int vfio_ap_mdev_reset_queues(struct mdev_device *mdev)
 			     matrix_mdev->matrix.apm_max + 1) {
 		for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm,
 				     matrix_mdev->matrix.aqm_max + 1) {
-			ret = vfio_ap_mdev_reset_queue(apid, apqi, 1);
+			ret = vfio_ap_mdev_reset_queue(apid, apqi);
 			/*
 			 * Regardless whether a queue turns out to be busy, or
 			 * is not operational, we need to continue resetting