[v2,4/4] ARM: dts: sun6i: Add default address and size cells for SPI
diff mbox series

Message ID d9c6af4363da3f45b1a2847cd337861ae5f18b8c.1557386749.git-series.maxime.ripard@bootlin.com
State Superseded
Headers show
Series
  • [v2,1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
Related show

Commit Message

Maxime Ripard May 9, 2019, 7:26 a.m. UTC
The SPI controller bindings require an address cell size of 1, and a size
cell size of 0. Let's put it at the DTSI level to make sure that's properly
enforced.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 arch/arm/boot/dts/sun6i-a31.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c04efad81bbc..a57cbf33c12f 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -987,6 +987,8 @@ 
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI0>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi1: spi@1c69000 {
@@ -999,6 +1001,8 @@ 
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI1>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi2: spi@1c6a000 {
@@ -1011,6 +1015,8 @@ 
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI2>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		spi3: spi@1c6b000 {
@@ -1023,6 +1029,8 @@ 
 			dma-names = "rx", "tx";
 			resets = <&ccu RST_AHB1_SPI3>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		gic: interrupt-controller@1c81000 {