@@ -1658,7 +1658,10 @@ struct lightbar_params_v1 {
int32_t s3_sleep_for;
int32_t s3_ramp_up;
int32_t s3_ramp_down;
+ int32_t s5_ramp_up;
+ int32_t s5_ramp_down;
int32_t tap_tick_delay;
+ int32_t tap_gate_delay;
int32_t tap_display_time;
/* Tap-for-battery params */
@@ -1686,11 +1689,82 @@ struct lightbar_params_v1 {
uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */
uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */
+ /* s5: single color pulse on inhibited power-up */
+ uint8_t s5_idx;
+
/* Color palette */
struct rgb_s color[8]; /* 0-3 are Google colors */
} __ec_todo_packed;
-/* Lightbar program */
+/* Lightbar command params v2
+ * crbug.com/467716
+ *
+ * lightbar_parms_v1 was too big for i2c, therefore in v2, we split them up by
+ * logical groups to make it more manageable ( < 120 bytes).
+ *
+ * NOTE: Each of these groups must be less than 120 bytes.
+ */
+
+struct lightbar_params_v2_timing {
+ /* Timing */
+ int32_t google_ramp_up;
+ int32_t google_ramp_down;
+ int32_t s3s0_ramp_up;
+ int32_t s0_tick_delay[2]; /* AC=0/1 */
+ int32_t s0a_tick_delay[2]; /* AC=0/1 */
+ int32_t s0s3_ramp_down;
+ int32_t s3_sleep_for;
+ int32_t s3_ramp_up;
+ int32_t s3_ramp_down;
+ int32_t s5_ramp_up;
+ int32_t s5_ramp_down;
+ int32_t tap_tick_delay;
+ int32_t tap_gate_delay;
+ int32_t tap_display_time;
+} __ec_todo_packed;
+
+struct lightbar_params_v2_tap {
+ /* Tap-for-battery params */
+ uint8_t tap_pct_red;
+ uint8_t tap_pct_green;
+ uint8_t tap_seg_min_on;
+ uint8_t tap_seg_max_on;
+ uint8_t tap_seg_osc;
+ uint8_t tap_idx[3];
+} __ec_todo_packed;
+
+struct lightbar_params_v2_oscillation {
+ /* Oscillation */
+ uint8_t osc_min[2]; /* AC=0/1 */
+ uint8_t osc_max[2]; /* AC=0/1 */
+ uint8_t w_ofs[2]; /* AC=0/1 */
+} __ec_todo_packed;
+
+struct lightbar_params_v2_brightness {
+ /* Brightness limits based on the backlight and AC. */
+ uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_min[2]; /* AC=0/1 */
+ uint8_t bright_bl_on_max[2]; /* AC=0/1 */
+} __ec_todo_packed;
+
+struct lightbar_params_v2_thresholds {
+ /* Battery level thresholds */
+ uint8_t battery_threshold[LB_BATTERY_LEVELS - 1];
+} __ec_todo_packed;
+
+struct lightbar_params_v2_colors {
+ /* Map [AC][battery_level] to color index */
+ uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */
+ uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */
+
+ /* s5: single color pulse on inhibited power-up */
+ uint8_t s5_idx;
+
+ /* Color palette */
+ struct rgb_s color[8]; /* 0-3 are Google colors */
+} __ec_todo_packed;
+
+/* Lightbar program. */
#define EC_LB_PROG_LEN 192
struct lightbar_program {
uint8_t size;
@@ -1704,7 +1778,10 @@ struct ec_params_lightbar {
* The following commands have no args:
*
* dump, off, on, init, get_seq, get_params_v0, get_params_v1,
- * version, get_brightness, get_demo, suspend, resume
+ * version, get_brightness, get_demo, suspend, resume,
+ * get_params_v2_timing, get_params_v2_tap, get_params_v2_osc,
+ * get_params_v2_bright, get_params_v2_thlds,
+ * get_params_v2_colors
*
* Don't use an empty struct, because C++ hates that.
*/
@@ -1731,6 +1808,14 @@ struct ec_params_lightbar {
struct lightbar_params_v0 set_params_v0;
struct lightbar_params_v1 set_params_v1;
+
+ struct lightbar_params_v2_timing set_v2par_timing;
+ struct lightbar_params_v2_tap set_v2par_tap;
+ struct lightbar_params_v2_oscillation set_v2par_osc;
+ struct lightbar_params_v2_brightness set_v2par_bright;
+ struct lightbar_params_v2_thresholds set_v2par_thlds;
+ struct lightbar_params_v2_colors set_v2par_colors;
+
struct lightbar_program set_program;
};
} __ec_todo_packed;
@@ -1752,6 +1837,14 @@ struct ec_response_lightbar {
struct lightbar_params_v0 get_params_v0;
struct lightbar_params_v1 get_params_v1;
+
+ struct lightbar_params_v2_timing get_params_v2_timing;
+ struct lightbar_params_v2_tap get_params_v2_tap;
+ struct lightbar_params_v2_oscillation get_params_v2_osc;
+ struct lightbar_params_v2_brightness get_params_v2_bright;
+ struct lightbar_params_v2_thresholds get_params_v2_thlds;
+ struct lightbar_params_v2_colors get_params_v2_colors;
+
struct __ec_todo_unpacked {
uint32_t num;
uint32_t flags;
@@ -1764,9 +1857,11 @@ struct ec_response_lightbar {
/*
* The following commands have no response:
*
- * off, on, init, set_brightness, seq, reg, set_rgb,
+ * off, on, init, set_brightness, seq, reg, set_rgb, demo,
* set_params_v0, set_params_v1, set_program,
- * manual_suspend_ctrl, suspend, resume
+ * manual_suspend_ctrl, suspend, resume, set_v2par_timing,
+ * set_v2par_tap, set_v2par_osc, set_v2par_bright,
+ * set_v2par_thlds, set_v2par_colors
*/
};
} __ec_todo_packed;
@@ -1795,6 +1890,18 @@ enum lightbar_command {
LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL = 19,
LIGHTBAR_CMD_SUSPEND = 20,
LIGHTBAR_CMD_RESUME = 21,
+ LIGHTBAR_CMD_GET_PARAMS_V2_TIMING = 22,
+ LIGHTBAR_CMD_SET_PARAMS_V2_TIMING = 23,
+ LIGHTBAR_CMD_GET_PARAMS_V2_TAP = 24,
+ LIGHTBAR_CMD_SET_PARAMS_V2_TAP = 25,
+ LIGHTBAR_CMD_GET_PARAMS_V2_OSCILLATION = 26,
+ LIGHTBAR_CMD_SET_PARAMS_V2_OSCILLATION = 27,
+ LIGHTBAR_CMD_GET_PARAMS_V2_BRIGHTNESS = 28,
+ LIGHTBAR_CMD_SET_PARAMS_V2_BRIGHTNESS = 29,
+ LIGHTBAR_CMD_GET_PARAMS_V2_THRESHOLDS = 30,
+ LIGHTBAR_CMD_SET_PARAMS_V2_THRESHOLDS = 31,
+ LIGHTBAR_CMD_GET_PARAMS_V2_COLORS = 32,
+ LIGHTBAR_CMD_SET_PARAMS_V2_COLORS = 33,
LIGHTBAR_NUM_CMDS
};
@@ -1813,6 +1920,14 @@ enum ec_led_id {
EC_LED_ID_POWER_LED,
/* LED on power adapter or its plug */
EC_LED_ID_ADAPTER_LED,
+ /* LED to indicate left side */
+ EC_LED_ID_LEFT_LED,
+ /* LED to indicate right side */
+ EC_LED_ID_RIGHT_LED,
+ /* LED to indicate recovery mode with HW_REINIT */
+ EC_LED_ID_RECOVERY_HW_REINIT_LED,
+ /* LED to indicate sysrq debug mode. */
+ EC_LED_ID_SYSRQ_DEBUG_LED,
EC_LED_ID_COUNT
};
@@ -1827,6 +1942,7 @@ enum ec_led_colors {
EC_LED_COLOR_BLUE,
EC_LED_COLOR_YELLOW,
EC_LED_COLOR_WHITE,
+ EC_LED_COLOR_AMBER,
EC_LED_COLOR_COUNT
};