diff mbox series

[v4,2/5] dt-bindings: imx-cpufreq-dt: Document opp-supported-hw usage

Message ID 7948ab63fe5c92da280542a9a372349486d40c65.1557742902.git.leonard.crestez@nxp.com (mailing list archive)
State Accepted
Delegated to: viresh kumar
Headers show
Series cpufreq: Add imx-cpufreq-dt driver for speed grading | expand

Commit Message

Leonard Crestez May 13, 2019, 11:01 a.m. UTC
The interpretation of opp-supported-hw bits for imx-cpufreq-dt driver is
not very obvious so attempt to explain it.

There is no OF compat string associated.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 .../bindings/cpufreq/imx-cpufreq-dt.txt       | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt

Comments

Rob Herring May 13, 2019, 5:16 p.m. UTC | #1
On Mon, 13 May 2019 11:01:39 +0000, Leonard Crestez wrote:
> The interpretation of opp-supported-hw bits for imx-cpufreq-dt driver is
> not very obvious so attempt to explain it.
> 
> There is no OF compat string associated.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> ---
>  .../bindings/cpufreq/imx-cpufreq-dt.txt       | 37 +++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt
new file mode 100644
index 000000000000..87bff5add3f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/imx-cpufreq-dt.txt
@@ -0,0 +1,37 @@ 
+i.MX CPUFreq-DT OPP bindings
+================================
+
+Certain i.MX SoCs support different OPPs depending on the "market segment" and
+"speed grading" value which are written in fuses. These bits are combined with
+the opp-supported-hw values for each OPP to check if the OPP is allowed.
+
+Required properties:
+--------------------
+
+For each opp entry in 'operating-points-v2' table:
+- opp-supported-hw: Two bitmaps indicating:
+  - Supported speed grade mask
+  - Supported market segment mask
+    0: Consumer
+    1: Extended Consumer
+    2: Industrial
+    3: Automotive
+
+Example:
+--------
+
+opp_table {
+	compatible = "operating-points-v2";
+	opp-1000000000 {
+		opp-hz = /bits/ 64 <1000000000>;
+		/* grade >= 0, consumer only */
+		opp-supported-hw = <0xf>, <0x3>;
+	};
+
+	opp-1300000000 {
+		opp-hz = /bits/ 64 <1300000000>;
+		opp-microvolt = <1000000>;
+		/* grade >= 1, all segments */
+		opp-supported-hw = <0xe>, <0x7>;
+	};
+}