[v4,02/13] dt-bindings: rcar-gen3-phy-usb2: Document use of usb_x1

Commit Message

Chris Brandt May 15, 2019, 3:20 p.m. UTC

Document the USB_X1 input and add clock-names to identify
functional and USB_X1 clocks.

Signed-off-by: Chris Brandt <[e-mail]>
Reviewed-by: Rob Herring <[e-mail]>
Reviewed-by: Yoshihiro Shimoda <[e-mail]>
Reviewed-by: Geert Uytterhoeven <[e-mail]>
Reviewed-by: Simon Horman <[e-mail]>
---
v4:
 * 'Name' to 'Names'
 * "fclk" to "fck"
 * added reviewed-by
v3:
 * added clock names
v2:
 * removed 'use_usb_x1' option
 * document that 'usb_x1' clock node will be detected to determine if
   48MHz clock exists
---
 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

Patch

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index d46188f450bf..f05d2c39a556 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -28,7 +28,11 @@  Required properties:
 	      followed by the generic version.
 
 - reg: offset and length of the partial USB 2.0 Host register block.
-- clocks: clock phandle and specifier pair(s).
+- clocks: clock phandle and specifier pair(s). For SoCs that have a separate
+          dedicated USB_X1 input for the PLL, that is also listed.
+- clock-names: Names of the clocks. The functional clock shall be called "fck"
+	       and USB_X1 shall be called "usb_x1". If only one clock is listed,
+	       this property is not required.
 - #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and
 	      using <0> is deprecated).