[1/2] ath10k: move pktlog connect service before htc start
diff mbox series

Message ID 1558087516-666-2-git-send-email-aambure@codeaurora.org
State New
Headers show
Series
  • correction in pktlog service connect and pktlog enable command
Related show

Commit Message

Abhishek Ambure May 17, 2019, 10:05 a.m. UTC
WCN3990 supports HTC service for pktlog. PKTLOG service should be
connected before HTC start. Hence move connect pktlog service before
HTC start

Fixes: 713358c321f4 ("ath10k: enable pktlog for WCN3990 target")
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00963-QCAHLSWMTPL-1

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/htc.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Patch
diff mbox series

diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index 805a7f8..e2980fe9 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -893,6 +893,14 @@  int ath10k_htc_start(struct ath10k_htc *htc)
 	int status = 0;
 	struct ath10k_htc_msg *msg;
 
+	if (ath10k_htc_pktlog_svc_supported(ar)) {
+		status = ath10k_htc_pktlog_connect(ar);
+		if (status) {
+			ath10k_err(ar, "failed to connect to pktlog: %d\n", status);
+			return status;
+		}
+	}
+
 	skb = ath10k_htc_build_tx_ctrl_skb(htc->ar);
 	if (!skb)
 		return -ENOMEM;
@@ -919,14 +927,6 @@  int ath10k_htc_start(struct ath10k_htc *htc)
 		return status;
 	}
 
-	if (ath10k_htc_pktlog_svc_supported(ar)) {
-		status = ath10k_htc_pktlog_connect(ar);
-		if (status) {
-			ath10k_err(ar, "failed to connect to pktlog: %d\n", status);
-			return status;
-		}
-	}
-
 	return 0;
 }