@@ -88,8 +88,7 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
int ret;
if (sdhci_am654->dll_on) {
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
- ENDLL_MASK, 0);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK, 0);
sdhci_am654->dll_on = false;
}
@@ -101,8 +100,7 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
val = (1 << OTAPDLYENA_SHIFT) |
(sdhci_am654->otap_del_sel << OTAPDLYSEL_SHIFT);
- regmap_update_bits(sdhci_am654->base, PHY_CTRL4,
- mask, val);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val);
switch (clock) {
case 200000000:
sel50 = 0;
@@ -120,8 +118,7 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
/* Configure PHY DLL frequency */
mask = SEL50_MASK | SEL100_MASK;
val = (sel50 << SEL50_SHIFT) | (sel100 << SEL100_SHIFT);
- regmap_update_bits(sdhci_am654->base, PHY_CTRL5,
- mask, val);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL5, mask, val);
/* Configure DLL TRIM */
mask = DLL_TRIM_ICP_MASK;
val = sdhci_am654->trm_icp << DLL_TRIM_ICP_SHIFT;
@@ -129,20 +126,17 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock)
/* Configure DLL driver strength */
mask |= DR_TY_MASK;
val |= sdhci_am654->drv_strength << DR_TY_SHIFT;
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
- mask, val);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, mask, val);
/* Enable DLL */
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
- ENDLL_MASK, 0x1 << ENDLL_SHIFT);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK,
+ 0x1 << ENDLL_SHIFT);
/*
* Poll for DLL ready. Use a one second timeout.
* Works in all experiments done so far
*/
- ret = regmap_read_poll_timeout(sdhci_am654->base,
- PHY_STAT1, val,
- val & DLLRDY_MASK,
- 1000, 1000000);
-
+ ret = regmap_read_poll_timeout(sdhci_am654->base, PHY_STAT1,
+ val, val & DLLRDY_MASK, 1000,
+ 1000000);
sdhci_am654->dll_on = true;
}
}
@@ -208,8 +202,7 @@ static int sdhci_am654_init(struct sdhci_host *host)
/* Reset OTAP to default value */
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
- regmap_update_bits(sdhci_am654->base, PHY_CTRL4,
- mask, 0x0);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, 0x0);
regmap_read(sdhci_am654->base, PHY_STAT1, &val);
if (~val & CALDONE_MASK) {
@@ -223,15 +216,14 @@ static int sdhci_am654_init(struct sdhci_host *host)
}
/* Enable pins by setting IO mux to 0 */
- regmap_update_bits(sdhci_am654->base, PHY_CTRL1,
- IOMUX_ENABLE_MASK, 0);
+ regmap_update_bits(sdhci_am654->base, PHY_CTRL1, IOMUX_ENABLE_MASK, 0);
/* Set slot type based on SD or eMMC */
if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
ctl_cfg_2 = SLOTTYPE_EMBEDDED;
- regmap_update_bits(sdhci_am654->base, CTL_CFG_2,
- SLOTTYPE_MASK, ctl_cfg_2);
+ regmap_update_bits(sdhci_am654->base, CTL_CFG_2, SLOTTYPE_MASK,
+ ctl_cfg_2);
return sdhci_add_host(host);
}
Line wrapping with the regmap_*() functions is way more conservative than required by the 80 character rule. Expand the function calls out to use less number of lines. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> --- drivers/mmc/host/sdhci_am654.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-)