diff mbox series

[v3,5/6] dpaa_eth: fix iova handling for contiguous frames

Message ID 20190530141951.6704-6-laurentiu.tudor@nxp.com (mailing list archive)
State New, archived
Headers show
Series Prerequisites for NXP LS104xA SMMU enablement | expand

Commit Message

Laurentiu Tudor May 30, 2019, 2:19 p.m. UTC
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

The driver relies on the no longer valid assumption that dma addresses
(iovas) are identical to physical addressees and uses phys_to_virt() to
make iova -> vaddr conversions. Fix this by adding a function that does
proper iova -> phys conversions using the iommu api and update the code
to use it.
Also, a dma_unmap_single() call had to be moved further down the code
because iova -> vaddr conversions were required before the unmap.
For now only the contiguous frame case is handled and the SG case is
split in a following patch.
While at it, clean-up a redundant dpaa_bpid2pool() and pass the bp
as parameter.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 .../net/ethernet/freescale/dpaa/dpaa_eth.c    | 42 ++++++++++---------
 .../net/ethernet/freescale/dpaa/dpaa_eth.h    |  2 +
 2 files changed, 24 insertions(+), 20 deletions(-)

Comments

Christoph Hellwig May 31, 2019, 4:32 p.m. UTC | #1
On Thu, May 30, 2019 at 05:19:50PM +0300, laurentiu.tudor@nxp.com wrote:
> +static phys_addr_t dpaa_iova_to_phys(const struct dpaa_priv *priv,
> +				     dma_addr_t addr)
> +{
> +	return priv->domain ? iommu_iova_to_phys(priv->domain, addr) : addr;
> +}

Again, a driver using the iommu API must not call iommu_* APIs.

This chane is not acceptable.
Laurentiu Tudor May 31, 2019, 4:53 p.m. UTC | #2
Hi Christoph,

> -----Original Message-----
> From: Christoph Hellwig <hch@infradead.org>
> Sent: Friday, May 31, 2019 7:32 PM
> 
> On Thu, May 30, 2019 at 05:19:50PM +0300, laurentiu.tudor@nxp.com wrote:
> > +static phys_addr_t dpaa_iova_to_phys(const struct dpaa_priv *priv,
> > +				     dma_addr_t addr)
> > +{
> > +	return priv->domain ? iommu_iova_to_phys(priv->domain, addr) : addr;
> > +}
> 
> Again, a driver using the iommu API must not call iommu_* APIs.
> 
> This chane is not acceptable.

Unfortunately due to our hardware particularities we do not have alternatives. This is also the case for our next generation of ethernet drivers [1]. I'll let my colleagues that work on the ethernet drivers to comment more on this.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c#n37

---
Best Regards, Laurentiu
Christoph Hellwig May 31, 2019, 4:55 p.m. UTC | #3
On Fri, May 31, 2019 at 04:53:16PM +0000, Laurentiu Tudor wrote:
> Unfortunately due to our hardware particularities we do not have alternatives. This is also the case for our next generation of ethernet drivers [1]. I'll let my colleagues that work on the ethernet drivers to comment more on this.

Then you need to enhance the DMA API to support your use case instead
of using an API only supported for two specific IOMMU implementations.

Remember in Linux you can should improve core code and not hack around
it in crappy ways making lots of assumptions in your drivers.
Laurentiu Tudor May 31, 2019, 5:01 p.m. UTC | #4
> -----Original Message-----
> From: Christoph Hellwig <hch@infradead.org>
> Sent: Friday, May 31, 2019 7:56 PM
> 
> On Fri, May 31, 2019 at 04:53:16PM +0000, Laurentiu Tudor wrote:
> > Unfortunately due to our hardware particularities we do not have
> alternatives. This is also the case for our next generation of ethernet
> drivers [1]. I'll let my colleagues that work on the ethernet drivers to
> comment more on this.
> 
> Then you need to enhance the DMA API to support your use case instead
> of using an API only supported for two specific IOMMU implementations.
> 
> Remember in Linux you can should improve core code and not hack around
> it in crappy ways making lots of assumptions in your drivers.

Alright, I'm ok with that. I'll try to come up with something, will keep you in the loop.

---
Best Regards, Laurentiu
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index f54b0cd0d175..46194a04617a 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -50,6 +50,7 @@ 
 #include <linux/highmem.h>
 #include <linux/percpu.h>
 #include <linux/dma-mapping.h>
+#include <linux/iommu.h>
 #include <linux/sort.h>
 #include <linux/phy_fixed.h>
 #include <soc/fsl/bman.h>
@@ -1595,6 +1596,12 @@  static int dpaa_eth_refill_bpools(struct dpaa_priv *priv)
 	return 0;
 }
 
+static phys_addr_t dpaa_iova_to_phys(const struct dpaa_priv *priv,
+				     dma_addr_t addr)
+{
+	return priv->domain ? iommu_iova_to_phys(priv->domain, addr) : addr;
+}
+
 /* Cleanup function for outgoing frame descriptors that were built on Tx path,
  * either contiguous frames or scatter/gather ones.
  * Skb freeing is not handled here.
@@ -1617,7 +1624,7 @@  static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv,
 	int nr_frags, i;
 	u64 ns;
 
-	skbh = (struct sk_buff **)phys_to_virt(addr);
+	skbh = (struct sk_buff **)phys_to_virt(dpaa_iova_to_phys(priv, addr));
 	skb = *skbh;
 
 	if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
@@ -1687,25 +1694,21 @@  static u8 rx_csum_offload(const struct dpaa_priv *priv, const struct qm_fd *fd)
  * accommodate the shared info area of the skb.
  */
 static struct sk_buff *contig_fd_to_skb(const struct dpaa_priv *priv,
-					const struct qm_fd *fd)
+					const struct qm_fd *fd,
+					struct dpaa_bp *dpaa_bp,
+					void *vaddr)
 {
 	ssize_t fd_off = qm_fd_get_offset(fd);
-	dma_addr_t addr = qm_fd_addr(fd);
-	struct dpaa_bp *dpaa_bp;
 	struct sk_buff *skb;
-	void *vaddr;
 
-	vaddr = phys_to_virt(addr);
 	WARN_ON(!IS_ALIGNED((unsigned long)vaddr, SMP_CACHE_BYTES));
 
-	dpaa_bp = dpaa_bpid2pool(fd->bpid);
-	if (!dpaa_bp)
-		goto free_buffer;
-
 	skb = build_skb(vaddr, dpaa_bp->size +
 			SKB_DATA_ALIGN(sizeof(struct skb_shared_info)));
-	if (WARN_ONCE(!skb, "Build skb failure on Rx\n"))
-		goto free_buffer;
+	if (WARN_ONCE(!skb, "Build skb failure on Rx\n")) {
+		skb_free_frag(vaddr);
+		return NULL;
+	}
 	WARN_ON(fd_off != priv->rx_headroom);
 	skb_reserve(skb, fd_off);
 	skb_put(skb, qm_fd_get_length(fd));
@@ -1713,10 +1716,6 @@  static struct sk_buff *contig_fd_to_skb(const struct dpaa_priv *priv,
 	skb->ip_summed = rx_csum_offload(priv, fd);
 
 	return skb;
-
-free_buffer:
-	skb_free_frag(vaddr);
-	return NULL;
 }
 
 /* Build an skb with the data of the first S/G entry in the linear portion and
@@ -2309,12 +2308,12 @@  static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
 	if (!dpaa_bp)
 		return qman_cb_dqrr_consume;
 
-	dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE);
-
 	/* prefetch the first 64 bytes of the frame or the SGT start */
-	vaddr = phys_to_virt(addr);
+	vaddr = phys_to_virt(dpaa_iova_to_phys(priv, addr));
 	prefetch(vaddr + qm_fd_get_offset(fd));
 
+	dma_unmap_single(dpaa_bp->dev, addr, dpaa_bp->size, DMA_FROM_DEVICE);
+
 	/* The only FD types that we may receive are contig and S/G */
 	WARN_ON((fd_format != qm_fd_contig) && (fd_format != qm_fd_sg));
 
@@ -2325,7 +2324,7 @@  static enum qman_cb_dqrr_result rx_default_dqrr(struct qman_portal *portal,
 	(*count_ptr)--;
 
 	if (likely(fd_format == qm_fd_contig))
-		skb = contig_fd_to_skb(priv, fd);
+		skb = contig_fd_to_skb(priv, fd, dpaa_bp, vaddr);
 	else
 		skb = sg_fd_to_skb(priv, fd);
 	if (!skb)
@@ -2836,6 +2835,9 @@  static int dpaa_eth_probe(struct platform_device *pdev)
 	priv = netdev_priv(net_dev);
 	priv->net_dev = net_dev;
 
+	/* cache iommu domain */
+	priv->domain = iommu_get_domain_for_dev(dev);
+
 	priv->msg_enable = netif_msg_init(debug, DPAA_MSG_DEFAULT);
 
 	/* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
index af320f83c742..1548cb67b448 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.h
@@ -185,6 +185,8 @@  struct dpaa_priv {
 
 	bool tx_tstamp; /* Tx timestamping enabled */
 	bool rx_tstamp; /* Rx timestamping enabled */
+
+	struct iommu_domain *domain;
 };
 
 /* from dpaa_ethtool.c */