diff mbox series

[v5,2/2] DRM: Add KMS driver for the Ingenic JZ47xx SoCs

Message ID 20190603152331.23160-2-paul@crapouillou.net (mailing list archive)
State New, archived
Headers show
Series [v5,1/2] dt-bindings: Add doc for the Ingenic JZ47xx LCD controller driver | expand

Commit Message

Paul Cercueil June 3, 2019, 3:23 p.m. UTC
Add a KMS driver for the Ingenic JZ47xx family of SoCs.
This driver is meant to replace the aging jz4740-fb driver.

This driver does not make use of the simple pipe helper, for the reason
that it will soon be updated to support more advanced features like
multiple planes, IPU integration for colorspace conversion and up/down
scaling, support for DSI displays, and TV-out and HDMI outputs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---

Notes:
    v2: - Remove custom handling of panel. The panel is now discovered using
    	  the standard API.
    	- Lots of small tweaks suggested by upstream
    
    v3: - Use devm_drm_dev_init()
    	- Update compatible strings to -lcd instead of -drm
    	- Add destroy() callbacks to plane and crtc
    	- The ingenic,lcd-mode is now read from the bridge's DT node
    
    v4: Remove ingenic,lcd-mode property completely. The various modes are now
    	deduced from the connector type, the pixel format or the bus flags.
    
    v5: - Fix framebuffer size incorrectly calculated for 24bpp framebuffers
    	- Use 32bpp framebuffer instead of 16bpp, as it'll work with both
    	  16-bit and 24-bit panel
    	- Get rid of drm_format_plane_cpp() which has been dropped upstream
    	- Avoid using drm_format_info->depth, which is deprecated.

 drivers/gpu/drm/Kconfig               |   2 +
 drivers/gpu/drm/Makefile              |   1 +
 drivers/gpu/drm/ingenic/Kconfig       |  16 +
 drivers/gpu/drm/ingenic/Makefile      |   1 +
 drivers/gpu/drm/ingenic/ingenic-drm.c | 818 ++++++++++++++++++++++++++
 5 files changed, 838 insertions(+)
 create mode 100644 drivers/gpu/drm/ingenic/Kconfig
 create mode 100644 drivers/gpu/drm/ingenic/Makefile
 create mode 100644 drivers/gpu/drm/ingenic/ingenic-drm.c

Comments

Sam Ravnborg June 19, 2019, 12:26 p.m. UTC | #1
Hi Paul.

On Mon, Jun 03, 2019 at 05:23:31PM +0200, Paul Cercueil wrote:
> Add a KMS driver for the Ingenic JZ47xx family of SoCs.
> This driver is meant to replace the aging jz4740-fb driver.
> 
> This driver does not make use of the simple pipe helper, for the reason
> that it will soon be updated to support more advanced features like
> multiple planes, IPU integration for colorspace conversion and up/down
> scaling, support for DSI displays, and TV-out and HDMI outputs.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Artur Rojek <contact@artur-rojek.eu>
> ---
> 
> Notes:
>     v2: - Remove custom handling of panel. The panel is now discovered using
>     	  the standard API.
>     	- Lots of small tweaks suggested by upstream
>     
>     v3: - Use devm_drm_dev_init()
>     	- Update compatible strings to -lcd instead of -drm
>     	- Add destroy() callbacks to plane and crtc
>     	- The ingenic,lcd-mode is now read from the bridge's DT node
>     
>     v4: Remove ingenic,lcd-mode property completely. The various modes are now
>     	deduced from the connector type, the pixel format or the bus flags.
>     
>     v5: - Fix framebuffer size incorrectly calculated for 24bpp framebuffers
>     	- Use 32bpp framebuffer instead of 16bpp, as it'll work with both
>     	  16-bit and 24-bit panel
>     	- Get rid of drm_format_plane_cpp() which has been dropped upstream
>     	- Avoid using drm_format_info->depth, which is deprecated.
In the drm world we include the revision notes in the changelog.
So I did this when I applied it to drm-misc-next.

Fixed a few trivial checkpatch warnings about indent too.
There was a few too-long-lines warnings that I ignored. Fixing them
would have hurt readability.

I assume you will maintain this driver onwards from now.
Please request drm-misc commit rights (see
https://www.freedesktop.org/wiki/AccountRequests/)
You will need a legacy SSH account.

And you should familiarize yourself with the maintainer-tools:
https://drm.pages.freedesktop.org/maintainer-tools/index.html

For my use I use "dim update-branches; dim apply; dim push
So only a small subset i needed for simple use.

	Sam
Paul Cercueil June 20, 2019, 2:15 p.m. UTC | #2
Le mer. 19 juin 2019 à 14:26, Sam Ravnborg <sam@ravnborg.org> a écrit 
:
> Hi Paul.
> 
> On Mon, Jun 03, 2019 at 05:23:31PM +0200, Paul Cercueil wrote:
>>  Add a KMS driver for the Ingenic JZ47xx family of SoCs.
>>  This driver is meant to replace the aging jz4740-fb driver.
>> 
>>  This driver does not make use of the simple pipe helper, for the 
>> reason
>>  that it will soon be updated to support more advanced features like
>>  multiple planes, IPU integration for colorspace conversion and 
>> up/down
>>  scaling, support for DSI displays, and TV-out and HDMI outputs.
>> 
>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  Tested-by: Artur Rojek <contact@artur-rojek.eu>
>>  ---
>> 
>>  Notes:
>>      v2: - Remove custom handling of panel. The panel is now 
>> discovered using
>>      	  the standard API.
>>      	- Lots of small tweaks suggested by upstream
>> 
>>      v3: - Use devm_drm_dev_init()
>>      	- Update compatible strings to -lcd instead of -drm
>>      	- Add destroy() callbacks to plane and crtc
>>      	- The ingenic,lcd-mode is now read from the bridge's DT node
>> 
>>      v4: Remove ingenic,lcd-mode property completely. The various 
>> modes are now
>>      	deduced from the connector type, the pixel format or the bus 
>> flags.
>> 
>>      v5: - Fix framebuffer size incorrectly calculated for 24bpp 
>> framebuffers
>>      	- Use 32bpp framebuffer instead of 16bpp, as it'll work with 
>> both
>>      	  16-bit and 24-bit panel
>>      	- Get rid of drm_format_plane_cpp() which has been dropped 
>> upstream
>>      	- Avoid using drm_format_info->depth, which is deprecated.
> In the drm world we include the revision notes in the changelog.
> So I did this when I applied it to drm-misc-next.
> 
> Fixed a few trivial checkpatch warnings about indent too.
> There was a few too-long-lines warnings that I ignored. Fixing them
> would have hurt readability.

Thanks.

> I assume you will maintain this driver onwards from now.
> Please request drm-misc commit rights (see
> https://www.freedesktop.org/wiki/AccountRequests/)
> You will need a legacy SSH account.

I requested an account here:
https://gitlab.freedesktop.org/freedesktop/freedesktop/issues/162

> And you should familiarize yourself with the maintainer-tools:
> https://drm.pages.freedesktop.org/maintainer-tools/index.html
> 
> For my use I use "dim update-branches; dim apply; dim push
> So only a small subset i needed for simple use.
> 
> 	Sam
Daniel Vetter June 21, 2019, 9:04 a.m. UTC | #3
On Thu, Jun 20, 2019 at 04:15:59PM +0200, Paul Cercueil wrote:
> 
> 
> Le mer. 19 juin 2019 à 14:26, Sam Ravnborg <sam@ravnborg.org> a écrit :
> > Hi Paul.
> > 
> > On Mon, Jun 03, 2019 at 05:23:31PM +0200, Paul Cercueil wrote:
> > >  Add a KMS driver for the Ingenic JZ47xx family of SoCs.
> > >  This driver is meant to replace the aging jz4740-fb driver.
> > > 
> > >  This driver does not make use of the simple pipe helper, for the
> > > reason
> > >  that it will soon be updated to support more advanced features like
> > >  multiple planes, IPU integration for colorspace conversion and
> > > up/down
> > >  scaling, support for DSI displays, and TV-out and HDMI outputs.
> > > 
> > >  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> > >  Tested-by: Artur Rojek <contact@artur-rojek.eu>
> > >  ---
> > > 
> > >  Notes:
> > >      v2: - Remove custom handling of panel. The panel is now
> > > discovered using
> > >      	  the standard API.
> > >      	- Lots of small tweaks suggested by upstream
> > > 
> > >      v3: - Use devm_drm_dev_init()
> > >      	- Update compatible strings to -lcd instead of -drm
> > >      	- Add destroy() callbacks to plane and crtc
> > >      	- The ingenic,lcd-mode is now read from the bridge's DT node
> > > 
> > >      v4: Remove ingenic,lcd-mode property completely. The various
> > > modes are now
> > >      	deduced from the connector type, the pixel format or the bus
> > > flags.
> > > 
> > >      v5: - Fix framebuffer size incorrectly calculated for 24bpp
> > > framebuffers
> > >      	- Use 32bpp framebuffer instead of 16bpp, as it'll work with
> > > both
> > >      	  16-bit and 24-bit panel
> > >      	- Get rid of drm_format_plane_cpp() which has been dropped
> > > upstream
> > >      	- Avoid using drm_format_info->depth, which is deprecated.
> > In the drm world we include the revision notes in the changelog.
> > So I did this when I applied it to drm-misc-next.
> > 
> > Fixed a few trivial checkpatch warnings about indent too.
> > There was a few too-long-lines warnings that I ignored. Fixing them
> > would have hurt readability.
> 
> Thanks.
> 
> > I assume you will maintain this driver onwards from now.
> > Please request drm-misc commit rights (see
> > https://www.freedesktop.org/wiki/AccountRequests/)
> > You will need a legacy SSH account.
> 
> I requested an account here:
> https://gitlab.freedesktop.org/freedesktop/freedesktop/issues/162

This 404s for me. Did you set the issue to private by any chance? Or
deleted already again?
-Daniel

> 
> > And you should familiarize yourself with the maintainer-tools:
> > https://drm.pages.freedesktop.org/maintainer-tools/index.html
> > 
> > For my use I use "dim update-branches; dim apply; dim push
> > So only a small subset i needed for simple use.
> > 
> > 	Sam
> 
>
Paul Cercueil June 21, 2019, 9:07 a.m. UTC | #4
Le ven. 21 juin 2019 à 11:04, Daniel Vetter <daniel@ffwll.ch> a écrit 
:
> On Thu, Jun 20, 2019 at 04:15:59PM +0200, Paul Cercueil wrote:
>> 
>> 
>>  Le mer. 19 juin 2019 à 14:26, Sam Ravnborg <sam@ravnborg.org> a 
>> écrit :
>>  > Hi Paul.
>>  >
>>  > On Mon, Jun 03, 2019 at 05:23:31PM +0200, Paul Cercueil wrote:
>>  > >  Add a KMS driver for the Ingenic JZ47xx family of SoCs.
>>  > >  This driver is meant to replace the aging jz4740-fb driver.
>>  > >
>>  > >  This driver does not make use of the simple pipe helper, for 
>> the
>>  > > reason
>>  > >  that it will soon be updated to support more advanced features 
>> like
>>  > >  multiple planes, IPU integration for colorspace conversion and
>>  > > up/down
>>  > >  scaling, support for DSI displays, and TV-out and HDMI outputs.
>>  > >
>>  > >  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  > >  Tested-by: Artur Rojek <contact@artur-rojek.eu>
>>  > >  ---
>>  > >
>>  > >  Notes:
>>  > >      v2: - Remove custom handling of panel. The panel is now
>>  > > discovered using
>>  > >      	  the standard API.
>>  > >      	- Lots of small tweaks suggested by upstream
>>  > >
>>  > >      v3: - Use devm_drm_dev_init()
>>  > >      	- Update compatible strings to -lcd instead of -drm
>>  > >      	- Add destroy() callbacks to plane and crtc
>>  > >      	- The ingenic,lcd-mode is now read from the bridge's DT 
>> node
>>  > >
>>  > >      v4: Remove ingenic,lcd-mode property completely. The 
>> various
>>  > > modes are now
>>  > >      	deduced from the connector type, the pixel format or the 
>> bus
>>  > > flags.
>>  > >
>>  > >      v5: - Fix framebuffer size incorrectly calculated for 24bpp
>>  > > framebuffers
>>  > >      	- Use 32bpp framebuffer instead of 16bpp, as it'll work 
>> with
>>  > > both
>>  > >      	  16-bit and 24-bit panel
>>  > >      	- Get rid of drm_format_plane_cpp() which has been dropped
>>  > > upstream
>>  > >      	- Avoid using drm_format_info->depth, which is deprecated.
>>  > In the drm world we include the revision notes in the changelog.
>>  > So I did this when I applied it to drm-misc-next.
>>  >
>>  > Fixed a few trivial checkpatch warnings about indent too.
>>  > There was a few too-long-lines warnings that I ignored. Fixing 
>> them
>>  > would have hurt readability.
>> 
>>  Thanks.
>> 
>>  > I assume you will maintain this driver onwards from now.
>>  > Please request drm-misc commit rights (see
>>  > https://www.freedesktop.org/wiki/AccountRequests/)
>>  > You will need a legacy SSH account.
>> 
>>  I requested an account here:
>>  https://gitlab.freedesktop.org/freedesktop/freedesktop/issues/162
> 
> This 404s for me. Did you set the issue to private by any chance? Or
> deleted already again?
> -Daniel

Sorry, yes, I set it to private. I thought I had to :(

-Paul


>> 
>>  > And you should familiarize yourself with the maintainer-tools:
>>  > https://drm.pages.freedesktop.org/maintainer-tools/index.html
>>  >
>>  > For my use I use "dim update-branches; dim apply; dim push
>>  > So only a small subset i needed for simple use.
>>  >
>>  > 	Sam
>> 
>> 
> 
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
Daniel Vetter June 21, 2019, 9:13 a.m. UTC | #5
On Fri, Jun 21, 2019 at 11:07:30AM +0200, Paul Cercueil wrote:
> 
> 
> Le ven. 21 juin 2019 à 11:04, Daniel Vetter <daniel@ffwll.ch> a écrit :
> > On Thu, Jun 20, 2019 at 04:15:59PM +0200, Paul Cercueil wrote:
> > > 
> > > 
> > >  Le mer. 19 juin 2019 à 14:26, Sam Ravnborg <sam@ravnborg.org> a
> > > écrit :
> > >  > Hi Paul.
> > >  >
> > >  > On Mon, Jun 03, 2019 at 05:23:31PM +0200, Paul Cercueil wrote:
> > >  > >  Add a KMS driver for the Ingenic JZ47xx family of SoCs.
> > >  > >  This driver is meant to replace the aging jz4740-fb driver.
> > >  > >
> > >  > >  This driver does not make use of the simple pipe helper, for
> > > the
> > >  > > reason
> > >  > >  that it will soon be updated to support more advanced features
> > > like
> > >  > >  multiple planes, IPU integration for colorspace conversion and
> > >  > > up/down
> > >  > >  scaling, support for DSI displays, and TV-out and HDMI outputs.
> > >  > >
> > >  > >  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> > >  > >  Tested-by: Artur Rojek <contact@artur-rojek.eu>
> > >  > >  ---
> > >  > >
> > >  > >  Notes:
> > >  > >      v2: - Remove custom handling of panel. The panel is now
> > >  > > discovered using
> > >  > >      	  the standard API.
> > >  > >      	- Lots of small tweaks suggested by upstream
> > >  > >
> > >  > >      v3: - Use devm_drm_dev_init()
> > >  > >      	- Update compatible strings to -lcd instead of -drm
> > >  > >      	- Add destroy() callbacks to plane and crtc
> > >  > >      	- The ingenic,lcd-mode is now read from the bridge's DT
> > > node
> > >  > >
> > >  > >      v4: Remove ingenic,lcd-mode property completely. The
> > > various
> > >  > > modes are now
> > >  > >      	deduced from the connector type, the pixel format or the
> > > bus
> > >  > > flags.
> > >  > >
> > >  > >      v5: - Fix framebuffer size incorrectly calculated for 24bpp
> > >  > > framebuffers
> > >  > >      	- Use 32bpp framebuffer instead of 16bpp, as it'll work
> > > with
> > >  > > both
> > >  > >      	  16-bit and 24-bit panel
> > >  > >      	- Get rid of drm_format_plane_cpp() which has been dropped
> > >  > > upstream
> > >  > >      	- Avoid using drm_format_info->depth, which is deprecated.
> > >  > In the drm world we include the revision notes in the changelog.
> > >  > So I did this when I applied it to drm-misc-next.
> > >  >
> > >  > Fixed a few trivial checkpatch warnings about indent too.
> > >  > There was a few too-long-lines warnings that I ignored. Fixing
> > > them
> > >  > would have hurt readability.
> > > 
> > >  Thanks.
> > > 
> > >  > I assume you will maintain this driver onwards from now.
> > >  > Please request drm-misc commit rights (see
> > >  > https://www.freedesktop.org/wiki/AccountRequests/)
> > >  > You will need a legacy SSH account.
> > > 
> > >  I requested an account here:
> > >  https://gitlab.freedesktop.org/freedesktop/freedesktop/issues/162
> > 
> > This 404s for me. Did you set the issue to private by any chance? Or
> > deleted already again?
> > -Daniel
> 
> Sorry, yes, I set it to private. I thought I had to :(

Well I can't ack it if its private, so please change that. Also,
everything is public around here, or almost everything ...
-Daniel

> 
> -Paul
> 
> 
> > > 
> > >  > And you should familiarize yourself with the maintainer-tools:
> > >  > https://drm.pages.freedesktop.org/maintainer-tools/index.html
> > >  >
> > >  > For my use I use "dim update-branches; dim apply; dim push
> > >  > So only a small subset i needed for simple use.
> > >  >
> > >  > 	Sam
> > > 
> > > 
> > 
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
> 
>
Paul Cercueil June 21, 2019, 9:17 a.m. UTC | #6
Le ven. 21 juin 2019 à 11:13, Daniel Vetter <daniel@ffwll.ch> a écrit 
:
> On Fri, Jun 21, 2019 at 11:07:30AM +0200, Paul Cercueil wrote:
>> 
>> 
>>  Le ven. 21 juin 2019 à 11:04, Daniel Vetter <daniel@ffwll.ch> a 
>> écrit :
>>  > On Thu, Jun 20, 2019 at 04:15:59PM +0200, Paul Cercueil wrote:
>>  > >
>>  > >
>>  > >  Le mer. 19 juin 2019 à 14:26, Sam Ravnborg <sam@ravnborg.org> 
>> a
>>  > > écrit :
>>  > >  > Hi Paul.
>>  > >  >
>>  > >  > On Mon, Jun 03, 2019 at 05:23:31PM +0200, Paul Cercueil 
>> wrote:
>>  > >  > >  Add a KMS driver for the Ingenic JZ47xx family of SoCs.
>>  > >  > >  This driver is meant to replace the aging jz4740-fb 
>> driver.
>>  > >  > >
>>  > >  > >  This driver does not make use of the simple pipe helper, 
>> for
>>  > > the
>>  > >  > > reason
>>  > >  > >  that it will soon be updated to support more advanced 
>> features
>>  > > like
>>  > >  > >  multiple planes, IPU integration for colorspace 
>> conversion and
>>  > >  > > up/down
>>  > >  > >  scaling, support for DSI displays, and TV-out and HDMI 
>> outputs.
>>  > >  > >
>>  > >  > >  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  > >  > >  Tested-by: Artur Rojek <contact@artur-rojek.eu>
>>  > >  > >  ---
>>  > >  > >
>>  > >  > >  Notes:
>>  > >  > >      v2: - Remove custom handling of panel. The panel is 
>> now
>>  > >  > > discovered using
>>  > >  > >      	  the standard API.
>>  > >  > >      	- Lots of small tweaks suggested by upstream
>>  > >  > >
>>  > >  > >      v3: - Use devm_drm_dev_init()
>>  > >  > >      	- Update compatible strings to -lcd instead of -drm
>>  > >  > >      	- Add destroy() callbacks to plane and crtc
>>  > >  > >      	- The ingenic,lcd-mode is now read from the bridge's 
>> DT
>>  > > node
>>  > >  > >
>>  > >  > >      v4: Remove ingenic,lcd-mode property completely. The
>>  > > various
>>  > >  > > modes are now
>>  > >  > >      	deduced from the connector type, the pixel format or 
>> the
>>  > > bus
>>  > >  > > flags.
>>  > >  > >
>>  > >  > >      v5: - Fix framebuffer size incorrectly calculated for 
>> 24bpp
>>  > >  > > framebuffers
>>  > >  > >      	- Use 32bpp framebuffer instead of 16bpp, as it'll 
>> work
>>  > > with
>>  > >  > > both
>>  > >  > >      	  16-bit and 24-bit panel
>>  > >  > >      	- Get rid of drm_format_plane_cpp() which has been 
>> dropped
>>  > >  > > upstream
>>  > >  > >      	- Avoid using drm_format_info->depth, which is 
>> deprecated.
>>  > >  > In the drm world we include the revision notes in the 
>> changelog.
>>  > >  > So I did this when I applied it to drm-misc-next.
>>  > >  >
>>  > >  > Fixed a few trivial checkpatch warnings about indent too.
>>  > >  > There was a few too-long-lines warnings that I ignored. 
>> Fixing
>>  > > them
>>  > >  > would have hurt readability.
>>  > >
>>  > >  Thanks.
>>  > >
>>  > >  > I assume you will maintain this driver onwards from now.
>>  > >  > Please request drm-misc commit rights (see
>>  > >  > https://www.freedesktop.org/wiki/AccountRequests/)
>>  > >  > You will need a legacy SSH account.
>>  > >
>>  > >  I requested an account here:
>>  > >  
>> https://gitlab.freedesktop.org/freedesktop/freedesktop/issues/162
>>  >
>>  > This 404s for me. Did you set the issue to private by any chance? 
>> Or
>>  > deleted already again?
>>  > -Daniel
>> 
>>  Sorry, yes, I set it to private. I thought I had to :(
> 
> Well I can't ack it if its private, so please change that. Also,
> everything is public around here, or almost everything ...
> -Daniel

I closed the old one and created a new, public one:
https://gitlab.freedesktop.org/freedesktop/freedesktop/issues/165


>> 
>>  > >
>>  > >  > And you should familiarize yourself with the 
>> maintainer-tools:
>>  > >  > https://drm.pages.freedesktop.org/maintainer-tools/index.html
>>  > >  >
>>  > >  > For my use I use "dim update-branches; dim apply; dim push
>>  > >  > So only a small subset i needed for simple use.
>>  > >  >
>>  > >  > 	Sam
>>  > >
>>  > >
>>  >
>>  > --
>>  > Daniel Vetter
>>  > Software Engineer, Intel Corporation
>>  > http://blog.ffwll.ch
>> 
>> 
> 
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
diff mbox series

Patch

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 6b34949416b1..b9362b4f6353 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -316,6 +316,8 @@  source "drivers/gpu/drm/sti/Kconfig"
 
 source "drivers/gpu/drm/imx/Kconfig"
 
+source "drivers/gpu/drm/ingenic/Kconfig"
+
 source "drivers/gpu/drm/v3d/Kconfig"
 
 source "drivers/gpu/drm/vc4/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 4a63c1fcf389..73538dde47d9 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -99,6 +99,7 @@  obj-$(CONFIG_DRM_TEGRA) += tegra/
 obj-$(CONFIG_DRM_STM) += stm/
 obj-$(CONFIG_DRM_STI) += sti/
 obj-$(CONFIG_DRM_IMX) += imx/
+obj-$(CONFIG_DRM_INGENIC) += ingenic/
 obj-$(CONFIG_DRM_MEDIATEK) += mediatek/
 obj-$(CONFIG_DRM_MESON)	+= meson/
 obj-y			+= i2c/
diff --git a/drivers/gpu/drm/ingenic/Kconfig b/drivers/gpu/drm/ingenic/Kconfig
new file mode 100644
index 000000000000..d82c3d37ec9c
--- /dev/null
+++ b/drivers/gpu/drm/ingenic/Kconfig
@@ -0,0 +1,16 @@ 
+config DRM_INGENIC
+	tristate "DRM Support for Ingenic SoCs"
+	depends on MIPS || COMPILE_TEST
+	depends on DRM
+	depends on CMA
+	depends on OF
+	select DRM_BRIDGE
+	select DRM_PANEL_BRIDGE
+	select DRM_KMS_HELPER
+	select DRM_KMS_CMA_HELPER
+	select DRM_GEM_CMA_HELPER
+	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+	help
+	  Choose this option for DRM support for the Ingenic SoCs.
+
+	  If M is selected the module will be called ingenic-drm.
diff --git a/drivers/gpu/drm/ingenic/Makefile b/drivers/gpu/drm/ingenic/Makefile
new file mode 100644
index 000000000000..11cac42ce0bb
--- /dev/null
+++ b/drivers/gpu/drm/ingenic/Makefile
@@ -0,0 +1 @@ 
+obj-$(CONFIG_DRM_INGENIC) += ingenic-drm.o
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.c b/drivers/gpu/drm/ingenic/ingenic-drm.c
new file mode 100644
index 000000000000..006ce6b012f5
--- /dev/null
+++ b/drivers/gpu/drm/ingenic/ingenic-drm.c
@@ -0,0 +1,818 @@ 
+// SPDX-License-Identifier: GPL-2.0
+//
+// Ingenic JZ47xx KMS driver
+//
+// Copyright (C) 2019, Paul Cercueil <paul@crapouillou.net>
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_irq.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_plane.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#define JZ_REG_LCD_CFG				0x00
+#define JZ_REG_LCD_VSYNC			0x04
+#define JZ_REG_LCD_HSYNC			0x08
+#define JZ_REG_LCD_VAT				0x0C
+#define JZ_REG_LCD_DAH				0x10
+#define JZ_REG_LCD_DAV				0x14
+#define JZ_REG_LCD_PS				0x18
+#define JZ_REG_LCD_CLS				0x1C
+#define JZ_REG_LCD_SPL				0x20
+#define JZ_REG_LCD_REV				0x24
+#define JZ_REG_LCD_CTRL				0x30
+#define JZ_REG_LCD_STATE			0x34
+#define JZ_REG_LCD_IID				0x38
+#define JZ_REG_LCD_DA0				0x40
+#define JZ_REG_LCD_SA0				0x44
+#define JZ_REG_LCD_FID0				0x48
+#define JZ_REG_LCD_CMD0				0x4C
+#define JZ_REG_LCD_DA1				0x50
+#define JZ_REG_LCD_SA1				0x54
+#define JZ_REG_LCD_FID1				0x58
+#define JZ_REG_LCD_CMD1				0x5C
+
+#define JZ_LCD_CFG_SLCD				BIT(31)
+#define JZ_LCD_CFG_PS_DISABLE			BIT(23)
+#define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
+#define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
+#define JZ_LCD_CFG_REV_DISABLE			BIT(20)
+#define JZ_LCD_CFG_HSYNCM			BIT(19)
+#define JZ_LCD_CFG_PCLKM			BIT(18)
+#define JZ_LCD_CFG_INV				BIT(17)
+#define JZ_LCD_CFG_SYNC_DIR			BIT(16)
+#define JZ_LCD_CFG_PS_POLARITY			BIT(15)
+#define JZ_LCD_CFG_CLS_POLARITY			BIT(14)
+#define JZ_LCD_CFG_SPL_POLARITY			BIT(13)
+#define JZ_LCD_CFG_REV_POLARITY			BIT(12)
+#define JZ_LCD_CFG_HSYNC_ACTIVE_LOW		BIT(11)
+#define JZ_LCD_CFG_PCLK_FALLING_EDGE		BIT(10)
+#define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
+#define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
+#define JZ_LCD_CFG_18_BIT			BIT(7)
+#define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
+
+#define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
+#define JZ_LCD_CFG_MODE_GENERIC_18BIT		BIT(7)
+#define JZ_LCD_CFG_MODE_GENERIC_24BIT		BIT(6)
+
+#define JZ_LCD_CFG_MODE_SPECIAL_TFT_1		1
+#define JZ_LCD_CFG_MODE_SPECIAL_TFT_2		2
+#define JZ_LCD_CFG_MODE_SPECIAL_TFT_3		3
+
+#define JZ_LCD_CFG_MODE_TV_OUT_P		4
+#define JZ_LCD_CFG_MODE_TV_OUT_I		6
+
+#define JZ_LCD_CFG_MODE_SINGLE_COLOR_STN	8
+#define JZ_LCD_CFG_MODE_SINGLE_MONOCHROME_STN	9
+#define JZ_LCD_CFG_MODE_DUAL_COLOR_STN		10
+#define JZ_LCD_CFG_MODE_DUAL_MONOCHROME_STN	11
+
+#define JZ_LCD_CFG_MODE_8BIT_SERIAL		12
+#define JZ_LCD_CFG_MODE_LCM			13
+
+#define JZ_LCD_VSYNC_VPS_OFFSET			16
+#define JZ_LCD_VSYNC_VPE_OFFSET			0
+
+#define JZ_LCD_HSYNC_HPS_OFFSET			16
+#define JZ_LCD_HSYNC_HPE_OFFSET			0
+
+#define JZ_LCD_VAT_HT_OFFSET			16
+#define JZ_LCD_VAT_VT_OFFSET			0
+
+#define JZ_LCD_DAH_HDS_OFFSET			16
+#define JZ_LCD_DAH_HDE_OFFSET			0
+
+#define JZ_LCD_DAV_VDS_OFFSET			16
+#define JZ_LCD_DAV_VDE_OFFSET			0
+
+#define JZ_LCD_CTRL_BURST_4			(0x0 << 28)
+#define JZ_LCD_CTRL_BURST_8			(0x1 << 28)
+#define JZ_LCD_CTRL_BURST_16			(0x2 << 28)
+#define JZ_LCD_CTRL_RGB555			BIT(27)
+#define JZ_LCD_CTRL_OFUP			BIT(26)
+#define JZ_LCD_CTRL_FRC_GRAYSCALE_16		(0x0 << 24)
+#define JZ_LCD_CTRL_FRC_GRAYSCALE_4		(0x1 << 24)
+#define JZ_LCD_CTRL_FRC_GRAYSCALE_2		(0x2 << 24)
+#define JZ_LCD_CTRL_PDD_MASK			(0xff << 16)
+#define JZ_LCD_CTRL_EOF_IRQ			BIT(13)
+#define JZ_LCD_CTRL_SOF_IRQ			BIT(12)
+#define JZ_LCD_CTRL_OFU_IRQ			BIT(11)
+#define JZ_LCD_CTRL_IFU0_IRQ			BIT(10)
+#define JZ_LCD_CTRL_IFU1_IRQ			BIT(9)
+#define JZ_LCD_CTRL_DD_IRQ			BIT(8)
+#define JZ_LCD_CTRL_QDD_IRQ			BIT(7)
+#define JZ_LCD_CTRL_REVERSE_ENDIAN		BIT(6)
+#define JZ_LCD_CTRL_LSB_FISRT			BIT(5)
+#define JZ_LCD_CTRL_DISABLE			BIT(4)
+#define JZ_LCD_CTRL_ENABLE			BIT(3)
+#define JZ_LCD_CTRL_BPP_1			0x0
+#define JZ_LCD_CTRL_BPP_2			0x1
+#define JZ_LCD_CTRL_BPP_4			0x2
+#define JZ_LCD_CTRL_BPP_8			0x3
+#define JZ_LCD_CTRL_BPP_15_16			0x4
+#define JZ_LCD_CTRL_BPP_18_24			0x5
+#define JZ_LCD_CTRL_BPP_MASK			(JZ_LCD_CTRL_RGB555 | (0x7 << 0))
+
+#define JZ_LCD_CMD_SOF_IRQ			BIT(31)
+#define JZ_LCD_CMD_EOF_IRQ			BIT(30)
+#define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
+
+#define JZ_LCD_SYNC_MASK			0x3ff
+
+#define JZ_LCD_STATE_EOF_IRQ			BIT(5)
+#define JZ_LCD_STATE_SOF_IRQ			BIT(4)
+#define JZ_LCD_STATE_DISABLED			BIT(0)
+
+struct ingenic_dma_hwdesc {
+	u32 next;
+	u32 addr;
+	u32 id;
+	u32 cmd;
+} __packed;
+
+struct jz_soc_info {
+	bool needs_dev_clk;
+};
+
+struct ingenic_drm {
+	struct drm_device drm;
+	struct drm_plane primary;
+	struct drm_crtc crtc;
+	struct drm_encoder encoder;
+
+	struct device *dev;
+	struct regmap *map;
+	struct clk *lcd_clk, *pix_clk;
+
+	struct ingenic_dma_hwdesc *dma_hwdesc;
+	dma_addr_t dma_hwdesc_phys;
+};
+
+static const u32 ingenic_drm_primary_formats[] = {
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_XRGB8888,
+};
+
+static bool ingenic_drm_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case JZ_REG_LCD_IID:
+	case JZ_REG_LCD_SA0:
+	case JZ_REG_LCD_FID0:
+	case JZ_REG_LCD_CMD0:
+	case JZ_REG_LCD_SA1:
+	case JZ_REG_LCD_FID1:
+	case JZ_REG_LCD_CMD1:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_config ingenic_drm_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+
+	.max_register = JZ_REG_LCD_CMD1,
+	.writeable_reg = ingenic_drm_writeable_reg,
+};
+
+static inline struct ingenic_drm *drm_device_get_priv(struct drm_device *drm)
+{
+	return container_of(drm, struct ingenic_drm, drm);
+}
+
+static inline struct ingenic_drm *drm_crtc_get_priv(struct drm_crtc *crtc)
+{
+	return container_of(crtc, struct ingenic_drm, crtc);
+}
+
+static inline struct ingenic_drm *
+drm_encoder_get_priv(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct ingenic_drm, encoder);
+}
+
+static inline struct ingenic_drm *drm_plane_get_priv(struct drm_plane *plane)
+{
+	return container_of(plane, struct ingenic_drm, primary);
+}
+
+static void ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc,
+					  struct drm_crtc_state *state)
+{
+	struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+
+	regmap_write(priv->map, JZ_REG_LCD_STATE, 0);
+
+	regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
+			   JZ_LCD_CTRL_ENABLE | JZ_LCD_CTRL_DISABLE,
+			   JZ_LCD_CTRL_ENABLE);
+
+	drm_crtc_vblank_on(crtc);
+}
+
+static void ingenic_drm_crtc_atomic_disable(struct drm_crtc *crtc,
+					   struct drm_crtc_state *state)
+{
+	struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+	unsigned int var;
+
+	drm_crtc_vblank_off(crtc);
+
+	regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
+			   JZ_LCD_CTRL_DISABLE, JZ_LCD_CTRL_DISABLE);
+
+	regmap_read_poll_timeout(priv->map, JZ_REG_LCD_STATE, var,
+				 var & JZ_LCD_STATE_DISABLED,
+				 1000, 0);
+}
+
+static void ingenic_drm_crtc_update_timings(struct ingenic_drm *priv,
+					    struct drm_display_mode *mode)
+{
+	unsigned int vpe, vds, vde, vt, hpe, hds, hde, ht;
+
+	vpe = mode->vsync_end - mode->vsync_start;
+	vds = mode->vtotal - mode->vsync_start;
+	vde = vds + mode->vdisplay;
+	vt = vde + mode->vsync_start - mode->vdisplay;
+
+	hpe = mode->hsync_end - mode->hsync_start;
+	hds = mode->htotal - mode->hsync_start;
+	hde = hds + mode->hdisplay;
+	ht = hde + mode->hsync_start - mode->hdisplay;
+
+	regmap_write(priv->map, JZ_REG_LCD_VSYNC,
+		     0 << JZ_LCD_VSYNC_VPS_OFFSET |
+		     vpe << JZ_LCD_VSYNC_VPE_OFFSET);
+
+	regmap_write(priv->map, JZ_REG_LCD_HSYNC,
+		     0 << JZ_LCD_HSYNC_HPS_OFFSET |
+		     hpe << JZ_LCD_HSYNC_HPE_OFFSET);
+
+	regmap_write(priv->map, JZ_REG_LCD_VAT,
+		     ht << JZ_LCD_VAT_HT_OFFSET |
+		     vt << JZ_LCD_VAT_VT_OFFSET);
+
+	regmap_write(priv->map, JZ_REG_LCD_DAH,
+		     hds << JZ_LCD_DAH_HDS_OFFSET |
+		     hde << JZ_LCD_DAH_HDE_OFFSET);
+	regmap_write(priv->map, JZ_REG_LCD_DAV,
+		     vds << JZ_LCD_DAV_VDS_OFFSET |
+		     vde << JZ_LCD_DAV_VDE_OFFSET);
+}
+
+static void ingenic_drm_crtc_update_ctrl(struct ingenic_drm *priv,
+					 const struct drm_format_info *finfo)
+{
+	unsigned int ctrl = JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16;
+
+	switch (finfo->format) {
+	case DRM_FORMAT_XRGB1555:
+		ctrl |= JZ_LCD_CTRL_RGB555;
+		/* fall-through */
+	case DRM_FORMAT_RGB565:
+		ctrl |= JZ_LCD_CTRL_BPP_15_16;
+		break;
+	case DRM_FORMAT_XRGB8888:
+		ctrl |= JZ_LCD_CTRL_BPP_18_24;
+		break;
+	}
+
+	regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
+			   JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16 |
+			   JZ_LCD_CTRL_BPP_MASK, ctrl);
+}
+
+static int ingenic_drm_crtc_atomic_check(struct drm_crtc *crtc,
+					 struct drm_crtc_state *state)
+{
+	struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+	long rate;
+
+	if (!drm_atomic_crtc_needs_modeset(state))
+		return 0;
+
+	rate = clk_round_rate(priv->pix_clk,
+			      state->adjusted_mode.clock * 1000);
+	if (rate < 0)
+		return rate;
+
+	return 0;
+}
+
+static void ingenic_drm_crtc_atomic_flush(struct drm_crtc *crtc,
+					  struct drm_crtc_state *oldstate)
+{
+	struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+	struct drm_crtc_state *state = crtc->state;
+	struct drm_pending_vblank_event *event = state->event;
+	struct drm_framebuffer *drm_fb = crtc->primary->state->fb;
+	const struct drm_format_info *finfo;
+
+	if (drm_atomic_crtc_needs_modeset(state)) {
+		finfo = drm_format_info(drm_fb->format->format);
+
+		ingenic_drm_crtc_update_timings(priv, &state->mode);
+		ingenic_drm_crtc_update_ctrl(priv, finfo);
+
+		clk_set_rate(priv->pix_clk, state->adjusted_mode.clock * 1000);
+
+		regmap_write(priv->map, JZ_REG_LCD_DA0, priv->dma_hwdesc->next);
+	}
+
+	if (event) {
+		state->event = NULL;
+
+		spin_lock_irq(&crtc->dev->event_lock);
+		if (drm_crtc_vblank_get(crtc) == 0)
+			drm_crtc_arm_vblank_event(crtc, event);
+		else
+			drm_crtc_send_vblank_event(crtc, event);
+		spin_unlock_irq(&crtc->dev->event_lock);
+	}
+}
+
+static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
+					    struct drm_plane_state *oldstate)
+{
+	struct ingenic_drm *priv = drm_plane_get_priv(plane);
+	struct drm_plane_state *state = plane->state;
+	unsigned int width, height, cpp;
+
+	width = state->crtc->state->adjusted_mode.hdisplay;
+	height = state->crtc->state->adjusted_mode.vdisplay;
+	cpp = state->fb->format->cpp[plane->index];
+
+	priv->dma_hwdesc->addr = drm_fb_cma_get_gem_addr(state->fb, state, 0);
+	priv->dma_hwdesc->cmd = width * height * cpp / 4;
+	priv->dma_hwdesc->cmd |= JZ_LCD_CMD_EOF_IRQ;
+}
+
+static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
+						struct drm_crtc_state *crtc_state,
+						struct drm_connector_state *conn_state)
+{
+	struct ingenic_drm *priv = drm_encoder_get_priv(encoder);
+	struct drm_display_mode *mode = &crtc_state->adjusted_mode;
+	struct drm_display_info *info = &conn_state->connector->display_info;
+	unsigned int cfg = JZ_LCD_CFG_PS_DISABLE
+			 | JZ_LCD_CFG_CLS_DISABLE
+			 | JZ_LCD_CFG_SPL_DISABLE
+			 | JZ_LCD_CFG_REV_DISABLE;
+
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		cfg |= JZ_LCD_CFG_VSYNC_ACTIVE_LOW;
+	if (info->bus_flags & DRM_BUS_FLAG_DE_LOW)
+		cfg |= JZ_LCD_CFG_DE_ACTIVE_LOW;
+	if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+		cfg |= JZ_LCD_CFG_PCLK_FALLING_EDGE;
+
+	if (conn_state->connector->connector_type == DRM_MODE_CONNECTOR_TV) {
+		if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+			cfg |= JZ_LCD_CFG_MODE_TV_OUT_I;
+		else
+			cfg |= JZ_LCD_CFG_MODE_TV_OUT_P;
+	} else {
+		switch (*info->bus_formats) {
+		case MEDIA_BUS_FMT_RGB565_1X16:
+			cfg |= JZ_LCD_CFG_MODE_GENERIC_16BIT;
+			break;
+		case MEDIA_BUS_FMT_RGB666_1X18:
+			cfg |= JZ_LCD_CFG_MODE_GENERIC_18BIT;
+			break;
+		case MEDIA_BUS_FMT_RGB888_1X24:
+			cfg |= JZ_LCD_CFG_MODE_GENERIC_24BIT;
+			break;
+		default:
+			break;
+		}
+	}
+
+	regmap_write(priv->map, JZ_REG_LCD_CFG, cfg);
+}
+
+static int ingenic_drm_encoder_atomic_check(struct drm_encoder *encoder,
+					    struct drm_crtc_state *crtc_state,
+					    struct drm_connector_state *conn_state)
+{
+	struct drm_display_info *info = &conn_state->connector->display_info;
+
+	if (info->num_bus_formats != 1)
+		return -EINVAL;
+
+	if (conn_state->connector->connector_type == DRM_MODE_CONNECTOR_TV)
+		return 0;
+
+	switch (*info->bus_formats) {
+	case MEDIA_BUS_FMT_RGB565_1X16:
+	case MEDIA_BUS_FMT_RGB666_1X18:
+	case MEDIA_BUS_FMT_RGB888_1X24:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t ingenic_drm_irq_handler(int irq, void *arg)
+{
+	struct ingenic_drm *priv = arg;
+	unsigned int state;
+
+	regmap_read(priv->map, JZ_REG_LCD_STATE, &state);
+
+	regmap_update_bits(priv->map, JZ_REG_LCD_STATE,
+			   JZ_LCD_STATE_EOF_IRQ, 0);
+
+	if (state & JZ_LCD_STATE_EOF_IRQ)
+		drm_crtc_handle_vblank(&priv->crtc);
+
+	return IRQ_HANDLED;
+}
+
+static void ingenic_drm_release(struct drm_device *drm)
+{
+	struct ingenic_drm *priv = drm_device_get_priv(drm);
+
+	drm_mode_config_cleanup(drm);
+	drm_dev_fini(drm);
+	kfree(priv);
+}
+
+static int ingenic_drm_enable_vblank(struct drm_crtc *crtc)
+{
+	struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+
+	regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
+			   JZ_LCD_CTRL_EOF_IRQ, JZ_LCD_CTRL_EOF_IRQ);
+
+	return 0;
+}
+
+static void ingenic_drm_disable_vblank(struct drm_crtc *crtc)
+{
+	struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+
+	regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, JZ_LCD_CTRL_EOF_IRQ, 0);
+}
+
+DEFINE_DRM_GEM_CMA_FOPS(ingenic_drm_fops);
+
+static struct drm_driver ingenic_drm_driver_data = {
+	.driver_features	= DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME
+				| DRIVER_ATOMIC,
+	.name			= "ingenic-drm",
+	.desc			= "DRM module for Ingenic SoCs",
+	.date			= "20190422",
+	.major			= 1,
+	.minor			= 0,
+	.patchlevel		= 0,
+
+	.fops			= &ingenic_drm_fops,
+
+	.dumb_create		= drm_gem_cma_dumb_create,
+	.gem_free_object_unlocked = drm_gem_cma_free_object,
+	.gem_vm_ops		= &drm_gem_cma_vm_ops,
+
+	.prime_handle_to_fd	= drm_gem_prime_handle_to_fd,
+	.prime_fd_to_handle	= drm_gem_prime_fd_to_handle,
+	.gem_prime_get_sg_table	= drm_gem_cma_prime_get_sg_table,
+	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+	.gem_prime_vmap		= drm_gem_cma_prime_vmap,
+	.gem_prime_vunmap	= drm_gem_cma_prime_vunmap,
+	.gem_prime_mmap		= drm_gem_cma_prime_mmap,
+
+	.irq_handler		= ingenic_drm_irq_handler,
+	.release		= ingenic_drm_release,
+};
+
+static const struct drm_plane_funcs ingenic_drm_primary_plane_funcs = {
+	.update_plane		= drm_atomic_helper_update_plane,
+	.disable_plane		= drm_atomic_helper_disable_plane,
+	.reset			= drm_atomic_helper_plane_reset,
+	.destroy		= drm_plane_cleanup,
+
+	.atomic_duplicate_state	= drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_plane_destroy_state,
+};
+
+static const struct drm_crtc_funcs ingenic_drm_crtc_funcs = {
+	.set_config		= drm_atomic_helper_set_config,
+	.page_flip		= drm_atomic_helper_page_flip,
+	.reset			= drm_atomic_helper_crtc_reset,
+	.destroy		= drm_crtc_cleanup,
+
+	.atomic_duplicate_state	= drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_crtc_destroy_state,
+
+	.enable_vblank		= ingenic_drm_enable_vblank,
+	.disable_vblank		= ingenic_drm_disable_vblank,
+
+	.gamma_set		= drm_atomic_helper_legacy_gamma_set,
+};
+
+static const struct drm_plane_helper_funcs ingenic_drm_plane_helper_funcs = {
+	.atomic_update		= ingenic_drm_plane_atomic_update,
+	.prepare_fb		= drm_gem_fb_prepare_fb,
+};
+
+static const struct drm_crtc_helper_funcs ingenic_drm_crtc_helper_funcs = {
+	.atomic_enable		= ingenic_drm_crtc_atomic_enable,
+	.atomic_disable		= ingenic_drm_crtc_atomic_disable,
+	.atomic_flush		= ingenic_drm_crtc_atomic_flush,
+	.atomic_check		= ingenic_drm_crtc_atomic_check,
+};
+
+static const struct drm_encoder_helper_funcs ingenic_drm_encoder_helper_funcs = {
+	.atomic_mode_set	= ingenic_drm_encoder_atomic_mode_set,
+	.atomic_check		= ingenic_drm_encoder_atomic_check,
+};
+
+static const struct drm_mode_config_funcs ingenic_drm_mode_config_funcs = {
+	.fb_create		= drm_gem_fb_create,
+	.output_poll_changed	= drm_fb_helper_output_poll_changed,
+	.atomic_check		= drm_atomic_helper_check,
+	.atomic_commit		= drm_atomic_helper_commit,
+};
+
+static const struct drm_encoder_funcs ingenic_drm_encoder_funcs = {
+	.destroy		= drm_encoder_cleanup,
+};
+
+static void ingenic_drm_free_dma_hwdesc(void *d)
+{
+	struct ingenic_drm *priv = d;
+
+	dma_free_coherent(priv->dev, sizeof(*priv->dma_hwdesc),
+			  priv->dma_hwdesc, priv->dma_hwdesc_phys);
+}
+
+static int ingenic_drm_probe(struct platform_device *pdev)
+{
+	const struct jz_soc_info *soc_info;
+	struct device *dev = &pdev->dev;
+	struct ingenic_drm *priv;
+	struct clk *parent_clk;
+	struct drm_bridge *bridge;
+	struct drm_panel *panel;
+	struct drm_device *drm;
+	struct resource *mem;
+	void __iomem *base;
+	long parent_rate;
+	int ret, irq;
+
+	soc_info = of_device_get_match_data(dev);
+	if (!soc_info) {
+		dev_err(dev, "Missing platform data\n");
+		return -EINVAL;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	drm = &priv->drm;
+	drm->dev_private = priv;
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = devm_drm_dev_init(dev, drm, &ingenic_drm_driver_data);
+	if (ret) {
+		kfree(priv);
+		return ret;
+	}
+
+	drm_mode_config_init(drm);
+	drm->mode_config.min_width = 0;
+	drm->mode_config.min_height = 0;
+	drm->mode_config.max_width = 800;
+	drm->mode_config.max_height = 600;
+	drm->mode_config.funcs = &ingenic_drm_mode_config_funcs;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(base)) {
+		dev_err(dev, "Failed to get memory resource");
+		return PTR_ERR(base);
+	}
+
+	priv->map = devm_regmap_init_mmio(dev, base,
+					  &ingenic_drm_regmap_config);
+	if (IS_ERR(priv->map)) {
+		dev_err(dev, "Failed to create regmap");
+		return PTR_ERR(priv->map);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "Failed to get platform irq");
+		return irq;
+	}
+
+	if (soc_info->needs_dev_clk) {
+		priv->lcd_clk = devm_clk_get(dev, "lcd");
+		if (IS_ERR(priv->lcd_clk)) {
+			dev_err(dev, "Failed to get lcd clock");
+			return PTR_ERR(priv->lcd_clk);
+		}
+	}
+
+	priv->pix_clk = devm_clk_get(dev, "lcd_pclk");
+	if (IS_ERR(priv->pix_clk)) {
+		dev_err(dev, "Failed to get pixel clock");
+		return PTR_ERR(priv->pix_clk);
+	}
+
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, &bridge);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get panel handle");
+		return ret;
+	}
+
+	if (panel) {
+		bridge = devm_drm_panel_bridge_add(dev, panel,
+						   DRM_MODE_CONNECTOR_Unknown);
+	}
+
+	priv->dma_hwdesc = dma_alloc_coherent(dev, sizeof(*priv->dma_hwdesc),
+					      &priv->dma_hwdesc_phys,
+					      GFP_KERNEL);
+	if (!priv->dma_hwdesc)
+		return -ENOMEM;
+
+	ret = devm_add_action_or_reset(dev, ingenic_drm_free_dma_hwdesc, priv);
+	if (ret)
+		return ret;
+
+	priv->dma_hwdesc->next = priv->dma_hwdesc_phys;
+	priv->dma_hwdesc->id = 0xdeafbead;
+
+	drm_plane_helper_add(&priv->primary, &ingenic_drm_plane_helper_funcs);
+
+	ret = drm_universal_plane_init(drm, &priv->primary,
+				       0, &ingenic_drm_primary_plane_funcs,
+				       ingenic_drm_primary_formats,
+				       ARRAY_SIZE(ingenic_drm_primary_formats),
+				       NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
+	if (ret) {
+		dev_err(dev, "Failed to register primary plane: %i", ret);
+		return ret;
+	}
+
+	drm_crtc_helper_add(&priv->crtc, &ingenic_drm_crtc_helper_funcs);
+
+	ret = drm_crtc_init_with_planes(drm, &priv->crtc, &priv->primary,
+					NULL, &ingenic_drm_crtc_funcs, NULL);
+	if (ret) {
+		dev_err(dev, "Failed to init CRTC: %i", ret);
+		return ret;
+	}
+
+	priv->encoder.possible_crtcs = 1;
+
+	drm_encoder_helper_add(&priv->encoder,
+			       &ingenic_drm_encoder_helper_funcs);
+
+	ret = drm_encoder_init(drm, &priv->encoder, &ingenic_drm_encoder_funcs,
+			       DRM_MODE_ENCODER_DPI, NULL);
+	if (ret) {
+		dev_err(dev, "Failed to init encoder: %i", ret);
+		return ret;
+	}
+
+	ret = drm_bridge_attach(&priv->encoder, bridge, NULL);
+	if (ret) {
+		dev_err(dev, "Unable to attach bridge");
+		return ret;
+	}
+
+	ret = drm_irq_install(drm, irq);
+	if (ret) {
+		dev_err(dev, "Unable to install IRQ handler");
+		return ret;
+	}
+
+	ret = drm_vblank_init(drm, 1);
+	if (ret) {
+		dev_err(dev, "Failed calling drm_vblank_init()");
+		return ret;
+	}
+
+	drm_mode_config_reset(drm);
+
+	ret = clk_prepare_enable(priv->pix_clk);
+	if (ret) {
+		dev_err(dev, "Unable to start pixel clock");
+		return ret;
+	}
+
+	if (priv->lcd_clk) {
+		parent_clk = clk_get_parent(priv->lcd_clk);
+		parent_rate = clk_get_rate(parent_clk);
+
+		/* LCD Device clock must be 3x the pixel clock for STN panels,
+		 * or 1.5x the pixel clock for TFT panels. To avoid having to
+		 * check for the LCD device clock everytime we do a mode change,
+		 * we set the LCD device clock to the highest rate possible.
+		 */
+		ret = clk_set_rate(priv->lcd_clk, parent_rate);
+		if (ret) {
+			dev_err(dev, "Unable to set LCD clock rate");
+			goto err_pixclk_disable;
+		}
+
+		ret = clk_prepare_enable(priv->lcd_clk);
+		if (ret) {
+			dev_err(dev, "Unable to start lcd clock");
+			goto err_pixclk_disable;
+		}
+	}
+
+	ret = drm_dev_register(drm, 0);
+	if (ret) {
+		dev_err(dev, "Failed to register DRM driver");
+		goto err_devclk_disable;
+	}
+
+	ret = drm_fbdev_generic_setup(drm, 32);
+	if (ret)
+		dev_warn(dev, "Unable to start fbdev emulation: %i", ret);
+
+	return 0;
+
+err_devclk_disable:
+	if (priv->lcd_clk)
+		clk_disable_unprepare(priv->lcd_clk);
+err_pixclk_disable:
+	clk_disable_unprepare(priv->pix_clk);
+	return ret;
+}
+
+static int ingenic_drm_remove(struct platform_device *pdev)
+{
+	struct ingenic_drm *priv = platform_get_drvdata(pdev);
+
+	if (priv->lcd_clk)
+		clk_disable_unprepare(priv->lcd_clk);
+	clk_disable_unprepare(priv->pix_clk);
+
+	drm_dev_unregister(&priv->drm);
+	drm_atomic_helper_shutdown(&priv->drm);
+
+	return 0;
+}
+
+static const struct jz_soc_info jz4740_soc_info = {
+	.needs_dev_clk = true,
+};
+
+static const struct jz_soc_info jz4725b_soc_info = {
+	.needs_dev_clk = false,
+};
+
+static const struct of_device_id ingenic_drm_of_match[] = {
+	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
+	{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver ingenic_drm_driver = {
+	.driver = {
+		.name = "ingenic-drm",
+		.of_match_table = of_match_ptr(ingenic_drm_of_match),
+	},
+	.probe = ingenic_drm_probe,
+	.remove = ingenic_drm_remove,
+};
+module_platform_driver(ingenic_drm_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("DRM driver for the Ingenic SoCs\n");
+MODULE_LICENSE("GPL v2");