[3/4] xfs: fix inode_cluster_size rounding mayhem
diff mbox series

Message ID 155968495968.1657505.12432054087739349861.stgit@magnolia
State Accepted
Headers show
Series
  • xfs: refactor inode geometry
Related show

Commit Message

Darrick J. Wong June 4, 2019, 9:49 p.m. UTC
From: Darrick J. Wong <darrick.wong@oracle.com>

inode_cluster_size is supposed to represent the size (in bytes) of an
inode cluster buffer.  We avoid having to handle multiple clusters per
filesystem block on filesystems with large blocks by openly rounding
this value up to 1 FSB when necessary.  However, we never reset
inode_cluster_size to reflect this new rounded value, which adds to the
potential for mistakes in calculating geometries.

Fix this by setting inode_cluster_size to reflect the rounded-up size if
needed, and special-case the few places in the sparse inodes code where
we actually need the smaller value to validate on-disk metadata.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 fs/xfs/libxfs/xfs_format.h     |    9 +++++++--
 fs/xfs/libxfs/xfs_ialloc.c     |   21 ++++++++++++++++-----
 fs/xfs/libxfs/xfs_trans_resv.c |    6 ++----
 fs/xfs/xfs_log_recover.c       |    3 +--
 fs/xfs/xfs_mount.c             |    4 ++--
 5 files changed, 28 insertions(+), 15 deletions(-)

Comments

Dave Chinner June 4, 2019, 10:05 p.m. UTC | #1
On Tue, Jun 04, 2019 at 02:49:19PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> inode_cluster_size is supposed to represent the size (in bytes) of an
> inode cluster buffer.  We avoid having to handle multiple clusters per
> filesystem block on filesystems with large blocks by openly rounding
> this value up to 1 FSB when necessary.  However, we never reset
> inode_cluster_size to reflect this new rounded value, which adds to the
> potential for mistakes in calculating geometries.
> 
> Fix this by setting inode_cluster_size to reflect the rounded-up size if
> needed, and special-case the few places in the sparse inodes code where
> we actually need the smaller value to validate on-disk metadata.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

LGTM.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Darrick J. Wong June 5, 2019, 12:24 a.m. UTC | #2
On Wed, Jun 05, 2019 at 08:05:18AM +1000, Dave Chinner wrote:
> On Tue, Jun 04, 2019 at 02:49:19PM -0700, Darrick J. Wong wrote:
> > From: Darrick J. Wong <darrick.wong@oracle.com>
> > 
> > inode_cluster_size is supposed to represent the size (in bytes) of an
> > inode cluster buffer.  We avoid having to handle multiple clusters per
> > filesystem block on filesystems with large blocks by openly rounding
> > this value up to 1 FSB when necessary.  However, we never reset
> > inode_cluster_size to reflect this new rounded value, which adds to the
> > potential for mistakes in calculating geometries.
> > 
> > Fix this by setting inode_cluster_size to reflect the rounded-up size if
> > needed, and special-case the few places in the sparse inodes code where
> > we actually need the smaller value to validate on-disk metadata.
> > 
> > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> 
> LGTM.
> 
> Reviewed-by: Dave Chinner <dchinner@redhat.com>

Thanks for the review!

--D

> 
> -- 
> Dave Chinner
> david@fromorbit.com

Patch
diff mbox series

diff --git a/fs/xfs/libxfs/xfs_format.h b/fs/xfs/libxfs/xfs_format.h
index 0e831f04725c..5729474e362f 100644
--- a/fs/xfs/libxfs/xfs_format.h
+++ b/fs/xfs/libxfs/xfs_format.h
@@ -1698,11 +1698,16 @@  struct xfs_ino_geometry {
 	/* Maximum inode count in this filesystem. */
 	uint64_t	maxicount;
 
+	/* Actual inode cluster buffer size, in bytes. */
+	unsigned int	inode_cluster_size;
+
 	/*
 	 * Desired inode cluster buffer size, in bytes.  This value is not
-	 * rounded up to at least one filesystem block.
+	 * rounded up to at least one filesystem block, which is necessary for
+	 * the sole purpose of validating sb_spino_align.  Runtime code must
+	 * only ever use inode_cluster_size.
 	 */
-	unsigned int	inode_cluster_size;
+	unsigned int	inode_cluster_size_raw;
 
 	/* Inode cluster sizes, adjusted to be at least 1 fsb. */
 	unsigned int	inodes_per_cluster;
diff --git a/fs/xfs/libxfs/xfs_ialloc.c b/fs/xfs/libxfs/xfs_ialloc.c
index fdfcc03a35b9..0f5ff2a4b0b8 100644
--- a/fs/xfs/libxfs/xfs_ialloc.c
+++ b/fs/xfs/libxfs/xfs_ialloc.c
@@ -2805,21 +2805,32 @@  xfs_ialloc_setup_geometry(
 		igeo->maxicount = 0;
 	}
 
-	igeo->inode_cluster_size = XFS_INODE_BIG_CLUSTER_SIZE;
+	/*
+	 * Compute the desired size of an inode cluster buffer size, which
+	 * starts at 8K and (on v5 filesystems) scales up with larger inode
+	 * sizes.
+	 *
+	 * Preserve the desired inode cluster size because the sparse inodes
+	 * feature uses that desired size (not the actual size) to compute the
+	 * sparse inode alignment.  The mount code validates this value, so we
+	 * cannot change the behavior.
+	 */
+	igeo->inode_cluster_size_raw = XFS_INODE_BIG_CLUSTER_SIZE;
 	if (xfs_sb_version_hascrc(&mp->m_sb)) {
-		int	new_size = igeo->inode_cluster_size;
+		int	new_size = igeo->inode_cluster_size_raw;
 
 		new_size *= mp->m_sb.sb_inodesize / XFS_DINODE_MIN_SIZE;
 		if (mp->m_sb.sb_inoalignmt >= XFS_B_TO_FSBT(mp, new_size))
-			igeo->inode_cluster_size = new_size;
+			igeo->inode_cluster_size_raw = new_size;
 	}
 
 	/* Calculate inode cluster ratios. */
-	if (igeo->inode_cluster_size > mp->m_sb.sb_blocksize)
+	if (igeo->inode_cluster_size_raw > mp->m_sb.sb_blocksize)
 		igeo->blocks_per_cluster = XFS_B_TO_FSBT(mp,
-				igeo->inode_cluster_size);
+				igeo->inode_cluster_size_raw);
 	else
 		igeo->blocks_per_cluster = 1;
+	igeo->inode_cluster_size = XFS_FSB_TO_B(mp, igeo->blocks_per_cluster);
 	igeo->inodes_per_cluster = XFS_FSB_TO_INO(mp, igeo->blocks_per_cluster);
 
 	/* Calculate inode cluster alignment. */
diff --git a/fs/xfs/libxfs/xfs_trans_resv.c b/fs/xfs/libxfs/xfs_trans_resv.c
index 2663dd7975a5..9d1326d14af9 100644
--- a/fs/xfs/libxfs/xfs_trans_resv.c
+++ b/fs/xfs/libxfs/xfs_trans_resv.c
@@ -308,8 +308,7 @@  xfs_calc_iunlink_remove_reservation(
 	struct xfs_mount        *mp)
 {
 	return xfs_calc_buf_res(1, mp->m_sb.sb_sectsize) +
-	       2 * max_t(uint, XFS_FSB_TO_B(mp, 1),
-			 M_IGEO(mp)->inode_cluster_size);
+	       2 * M_IGEO(mp)->inode_cluster_size;
 }
 
 /*
@@ -347,8 +346,7 @@  STATIC uint
 xfs_calc_iunlink_add_reservation(xfs_mount_t *mp)
 {
 	return xfs_calc_buf_res(1, mp->m_sb.sb_sectsize) +
-			max_t(uint, XFS_FSB_TO_B(mp, 1),
-			      M_IGEO(mp)->inode_cluster_size);
+			M_IGEO(mp)->inode_cluster_size;
 }
 
 /*
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 1557304f3d68..f7c062df29bf 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -2893,8 +2893,7 @@  xlog_recover_buffer_pass2(
 	 */
 	if (XFS_DINODE_MAGIC ==
 	    be16_to_cpu(*((__be16 *)xfs_buf_offset(bp, 0))) &&
-	    (BBTOB(bp->b_io_length) != max(log->l_mp->m_sb.sb_blocksize,
-			M_IGEO(log->l_mp)->inode_cluster_size))) {
+	    (BBTOB(bp->b_io_length) != M_IGEO(log->l_mp)->inode_cluster_size)) {
 		xfs_buf_stale(bp);
 		error = xfs_bwrite(bp);
 	} else {
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 81d6535b24b4..544fa469aca4 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -746,11 +746,11 @@  xfs_mountfs(
 	 */
 	if (xfs_sb_version_hassparseinodes(&mp->m_sb) &&
 	    mp->m_sb.sb_spino_align !=
-			XFS_B_TO_FSBT(mp, igeo->inode_cluster_size)) {
+			XFS_B_TO_FSBT(mp, igeo->inode_cluster_size_raw)) {
 		xfs_warn(mp,
 	"Sparse inode block alignment (%u) must match cluster size (%llu).",
 			 mp->m_sb.sb_spino_align,
-			 XFS_B_TO_FSBT(mp, igeo->inode_cluster_size));
+			 XFS_B_TO_FSBT(mp, igeo->inode_cluster_size_raw));
 		error = -EINVAL;
 		goto out_remove_uuid;
 	}