| Message ID | 3912a2863e858f3623ced61737836e42c7b19149.1560071167.git.ryder.lee@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mt76: mt7615: add support for per-chain signal strength reporting | expand |
according to my findings
MT_RXV4_RCPI1 is part of rx descriptor 4 and not 3
so it must be rxdg4 = rxd[4] etc.
however rxdg3 contains MT_RXV3_IB_RSSIRX which can be used for signal calculation.
i already wrote a similar code for this driver which i sended to felix a long time ago.
my variant looks like
status->signal = (FIELD_GET(MT_RXV3_IB_RSSIRX, rxdg3) - 220) / 2;
status->chain_signal[0] = (FIELD_GET(MT_RXV4_RCPI0, rxdg4) - 220) / 2;
status->chain_signal[1] = (FIELD_GET(MT_RXV4_RCPI1, rxdg4) - 220) / 2;
status->chain_signal[2] = (FIELD_GET(MT_RXV4_RCPI2, rxdg4) - 220) / 2;
status->chain_signal[3] = (FIELD_GET(MT_RXV4_RCPI3, rxdg4) - 220) / 2;
Am 09.06.2019 um 11:09 schrieb Ryder Lee:
> Fill in RX status->chain_signal to avoid empty value.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> .../net/wireless/mediatek/mt76/mt7615/mac.c | 30 ++++++++++++++++++-
> .../net/wireless/mediatek/mt76/mt7615/mac.h | 5 ++++
> 2 files changed, 34 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
> index b60d42b5923d..9ee83ea11b8c
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
> @@ -13,6 +13,11 @@
> #include "../dma.h"
> #include "mac.h"
>
> +static inline s8 to_rssi(u32 field, u32 rxv)
> +{
> + return (FIELD_GET(field, rxv) - 220) / 2;
> +}
> +
> static struct mt76_wcid *mt7615_rx_get_wcid(struct mt7615_dev *dev,
> u8 idx, bool unicast)
> {
> @@ -120,6 +125,7 @@ int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb)
> if (rxd0 & MT_RXD0_NORMAL_GROUP_3) {
> u32 rxdg0 = le32_to_cpu(rxd[0]);
> u32 rxdg1 = le32_to_cpu(rxd[1]);
> + u32 rxdg3 = le32_to_cpu(rxd[3]);
> u8 stbc = FIELD_GET(MT_RXV1_HT_STBC, rxdg0);
> bool cck = false;
>
> @@ -169,7 +175,29 @@ int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb)
>
> status->enc_flags |= RX_ENC_FLAG_STBC_MASK * stbc;
>
> - /* TODO: RSSI */
> + status->chains = dev->mt76.antenna_mask;
> + status->chain_signal[0] = to_rssi(MT_RXV4_RCPI0, rxdg3);
> + status->signal = status->chain_signal[0];
> +
> + switch (status->chains) {
> + case 0x3:
> + status->chain_signal[1] = to_rssi(MT_RXV4_RCPI1, rxdg3);
> + status->signal = max(status->signal,
> + status->chain_signal[1]);
> + break;
> + case 0x7:
> + status->chain_signal[2] = to_rssi(MT_RXV4_RCPI2, rxdg3);
> + status->signal = max(status->signal,
> + status->chain_signal[2]);
> + break;
> + case 0xf:
> + status->chain_signal[3] = to_rssi(MT_RXV4_RCPI3, rxdg3);
> + status->signal = max(status->signal,
> + status->chain_signal[3]);
> + break;
> + default:
> + break;
> + }
> rxd += 6;
> if ((u8 *)rxd - skb->data >= skb->len)
> return -EINVAL;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.h b/drivers/net/wireless/mediatek/mt76/mt7615/mac.h
> index 18ad4b8a3807..b00ce8db58e9
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.h
> @@ -98,6 +98,11 @@ enum rx_pkt_type {
> #define MT_RXV2_GROUP_ID GENMASK(26, 21)
> #define MT_RXV2_LENGTH GENMASK(20, 0)
>
> +#define MT_RXV4_RCPI3 GENMASK(31, 24)
> +#define MT_RXV4_RCPI2 GENMASK(23, 16)
> +#define MT_RXV4_RCPI1 GENMASK(15, 8)
> +#define MT_RXV4_RCPI0 GENMASK(7, 0)
> +
> enum tx_header_format {
> MT_HDR_FORMAT_802_3,
> MT_HDR_FORMAT_CMD,
On Sun, 2019-06-09 at 16:44 +0200, Sebastian Gottschall wrote: > according to my findings > > MT_RXV4_RCPI1 is part of rx descriptor 4 and not 3 > so it must be rxdg4 = rxd[4] etc. RXV start from 1 in the code. That is: RXV1 <-> rxdg0, RXV2 <-> rxdg1 ...so RXV4 <-> rxdg3 > however rxdg3 contains MT_RXV3_IB_RSSIRX which can be used for signal calculation. > i already wrote a similar code for this driver which i sended to felix a long time ago. > my variant looks like > status->signal = (FIELD_GET(MT_RXV3_IB_RSSIRX, rxdg3) - 220) / 2; > status->chain_signal[0] = (FIELD_GET(MT_RXV4_RCPI0, rxdg4) - 220) / 2; > status->chain_signal[1] = (FIELD_GET(MT_RXV4_RCPI1, rxdg4) - 220) / 2; > status->chain_signal[2] = (FIELD_GET(MT_RXV4_RCPI2, rxdg4) - 220) / 2; > status->chain_signal[3] = (FIELD_GET(MT_RXV4_RCPI3, rxdg4) - 220) / 2; > Am 09.06.2019 um 11:09 schrieb Ryder Lee: > > Fill in RX status->chain_signal to avoid empty value. > > > > Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> > > --- > > .../net/wireless/mediatek/mt76/mt7615/mac.c | 30 ++++++++++++++++++- > > .../net/wireless/mediatek/mt76/mt7615/mac.h | 5 ++++ > > 2 files changed, 34 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c > > index b60d42b5923d..9ee83ea11b8c > > --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c > > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c > > @@ -13,6 +13,11 @@ > > #include "../dma.h" > > #include "mac.h" > > > > +static inline s8 to_rssi(u32 field, u32 rxv) > > +{ > > + return (FIELD_GET(field, rxv) - 220) / 2; > > +} > > + > > static struct mt76_wcid *mt7615_rx_get_wcid(struct mt7615_dev *dev, > > u8 idx, bool unicast) > > { > > @@ -120,6 +125,7 @@ int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb) > > if (rxd0 & MT_RXD0_NORMAL_GROUP_3) { > > u32 rxdg0 = le32_to_cpu(rxd[0]); > > u32 rxdg1 = le32_to_cpu(rxd[1]); > > + u32 rxdg3 = le32_to_cpu(rxd[3]); > > u8 stbc = FIELD_GET(MT_RXV1_HT_STBC, rxdg0); > > bool cck = false; > > > > @@ -169,7 +175,29 @@ int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb) > > > > status->enc_flags |= RX_ENC_FLAG_STBC_MASK * stbc; > > > > - /* TODO: RSSI */ > > + status->chains = dev->mt76.antenna_mask; > > + status->chain_signal[0] = to_rssi(MT_RXV4_RCPI0, rxdg3); > > + status->signal = status->chain_signal[0]; > > + > > + switch (status->chains) { > > + case 0x3: > > + status->chain_signal[1] = to_rssi(MT_RXV4_RCPI1, rxdg3); > > + status->signal = max(status->signal, > > + status->chain_signal[1]); > > + break; > > + case 0x7: > > + status->chain_signal[2] = to_rssi(MT_RXV4_RCPI2, rxdg3); > > + status->signal = max(status->signal, > > + status->chain_signal[2]); > > + break; > > + case 0xf: > > + status->chain_signal[3] = to_rssi(MT_RXV4_RCPI3, rxdg3); > > + status->signal = max(status->signal, > > + status->chain_signal[3]); > > + break; > > + default: > > + break; > > + } > > rxd += 6; > > if ((u8 *)rxd - skb->data >= skb->len) > > return -EINVAL; > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.h b/drivers/net/wireless/mediatek/mt76/mt7615/mac.h > > index 18ad4b8a3807..b00ce8db58e9 > > --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.h > > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.h > > @@ -98,6 +98,11 @@ enum rx_pkt_type { > > #define MT_RXV2_GROUP_ID GENMASK(26, 21) > > #define MT_RXV2_LENGTH GENMASK(20, 0) > > > > +#define MT_RXV4_RCPI3 GENMASK(31, 24) > > +#define MT_RXV4_RCPI2 GENMASK(23, 16) > > +#define MT_RXV4_RCPI1 GENMASK(15, 8) > > +#define MT_RXV4_RCPI0 GENMASK(7, 0) > > + > > enum tx_header_format { > > MT_HDR_FORMAT_802_3, > > MT_HDR_FORMAT_CMD, > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek
On Mon, 2019-06-10 at 10:09 +0800, Ryder Lee wrote: > On Sun, 2019-06-09 at 16:44 +0200, Sebastian Gottschall wrote: > > according to my findings > > > > MT_RXV4_RCPI1 is part of rx descriptor 4 and not 3 > > so it must be rxdg4 = rxd[4] etc. > > RXV start from 1 in the code. > > That is: RXV1 <-> rxdg0, RXV2 <-> rxdg1 ...so RXV4 <-> rxdg3 > > > however rxdg3 contains MT_RXV3_IB_RSSIRX which can be used for signal calculation. > > i already wrote a similar code for this driver which i sended to felix a long time ago. > > my variant looks like > > status->signal = (FIELD_GET(MT_RXV3_IB_RSSIRX, rxdg3) - 220) / 2; > > status->chain_signal[0] = (FIELD_GET(MT_RXV4_RCPI0, rxdg4) - 220) / 2; > > status->chain_signal[1] = (FIELD_GET(MT_RXV4_RCPI1, rxdg4) - 220) / 2; > > status->chain_signal[2] = (FIELD_GET(MT_RXV4_RCPI2, rxdg4) - 220) / 2; > > status->chain_signal[3] = (FIELD_GET(MT_RXV4_RCPI3, rxdg4) - 220) / 2; mt7615 actually doesn't use in-band RSSI for signal calculation, but it occurs to me that i should modify the code to compare per-chain's signal. Something like this: status->chain_signal[0] = to_rssi(MT_RXV4_RCPI0, rxdg3); status->chain_signal[1] = to_rssi(MT_RXV4_RCPI1, rxdg3); status->chain_signal[2] = to_rssi(MT_RXV4_RCPI2, rxdg3); status->chain_signal[3] = to_rssi(MT_RXV4_RCPI3, rxdg3); status->signal = status->chain_signal[0]; switch (status->chains) { case 0xf: status->signal = max(status->signal, status->chain_signal[3]); case 0x7: status->signal = max(status->signal, status->chain_signal[2]); case 0x3: status->signal = max(status->signal, status->chain_signal[1]); break; default: break; } I could send a v2 or you can take care of that. Ryder
okay. curious is, that my variant works with sane results too. i will test your variant and check the results Sebastian Am 10.06.2019 um 06:22 schrieb Ryder Lee: > On Mon, 2019-06-10 at 10:09 +0800, Ryder Lee wrote: >> On Sun, 2019-06-09 at 16:44 +0200, Sebastian Gottschall wrote: >>> according to my findings >>> >>> MT_RXV4_RCPI1 is part of rx descriptor 4 and not 3 >>> so it must be rxdg4 = rxd[4] etc. >> RXV start from 1 in the code. >> >> That is: RXV1 <-> rxdg0, RXV2 <-> rxdg1 ...so RXV4 <-> rxdg3 >> >>> however rxdg3 contains MT_RXV3_IB_RSSIRX which can be used for signal calculation. >>> i already wrote a similar code for this driver which i sended to felix a long time ago. >>> my variant looks like >>> status->signal = (FIELD_GET(MT_RXV3_IB_RSSIRX, rxdg3) - 220) / 2; >>> status->chain_signal[0] = (FIELD_GET(MT_RXV4_RCPI0, rxdg4) - 220) / 2; >>> status->chain_signal[1] = (FIELD_GET(MT_RXV4_RCPI1, rxdg4) - 220) / 2; >>> status->chain_signal[2] = (FIELD_GET(MT_RXV4_RCPI2, rxdg4) - 220) / 2; >>> status->chain_signal[3] = (FIELD_GET(MT_RXV4_RCPI3, rxdg4) - 220) / 2; > mt7615 actually doesn't use in-band RSSI for signal calculation, but it > occurs to me that i should modify the code to compare per-chain's > signal. Something like this: > > status->chain_signal[0] = to_rssi(MT_RXV4_RCPI0, rxdg3); > status->chain_signal[1] = to_rssi(MT_RXV4_RCPI1, rxdg3); > status->chain_signal[2] = to_rssi(MT_RXV4_RCPI2, rxdg3); > status->chain_signal[3] = to_rssi(MT_RXV4_RCPI3, rxdg3); > status->signal = status->chain_signal[0]; > > switch (status->chains) { > case 0xf: > status->signal = max(status->signal, > status->chain_signal[3]); > case 0x7: > status->signal = max(status->signal, > status->chain_signal[2]); > case 0x3: > status->signal = max(status->signal, > status->chain_signal[1]); > break; > default: > break; > } > > > I could send a v2 or you can take care of that. > > Ryder > >
On Mon, 2019-06-10 at 06:47 +0200, Sebastian Gottschall wrote: > okay. curious is, that my variant works with sane results too. > i will test your variant and check the results > > Sebastian Please don't top post as it's hard to track the thread. More specifically, IBRSSI is obtained from packet's L-STF portion and MTK HW PD (packet detection) will take it as a reference. (with variation more or less) As for RCPI which is calculated from packet's data portion. The other MTK chipsets may use IBRSSI as their baseband couldn't report RCPI. Ryder > Am 10.06.2019 um 06:22 schrieb Ryder Lee: > > On Mon, 2019-06-10 at 10:09 +0800, Ryder Lee wrote: > >> On Sun, 2019-06-09 at 16:44 +0200, Sebastian Gottschall wrote: > >>> according to my findings > >>> > >>> MT_RXV4_RCPI1 is part of rx descriptor 4 and not 3 > >>> so it must be rxdg4 = rxd[4] etc. > >> RXV start from 1 in the code. > >> > >> That is: RXV1 <-> rxdg0, RXV2 <-> rxdg1 ...so RXV4 <-> rxdg3 > >> > >>> however rxdg3 contains MT_RXV3_IB_RSSIRX which can be used for signal calculation. > >>> i already wrote a similar code for this driver which i sended to felix a long time ago. > >>> my variant looks like > >>> status->signal = (FIELD_GET(MT_RXV3_IB_RSSIRX, rxdg3) - 220) / 2; > >>> status->chain_signal[0] = (FIELD_GET(MT_RXV4_RCPI0, rxdg4) - 220) / 2; > >>> status->chain_signal[1] = (FIELD_GET(MT_RXV4_RCPI1, rxdg4) - 220) / 2; > >>> status->chain_signal[2] = (FIELD_GET(MT_RXV4_RCPI2, rxdg4) - 220) / 2; > >>> status->chain_signal[3] = (FIELD_GET(MT_RXV4_RCPI3, rxdg4) - 220) / 2; > > mt7615 actually doesn't use in-band RSSI for signal calculation, but it > > occurs to me that i should modify the code to compare per-chain's > > signal. Something like this: > > > > status->chain_signal[0] = to_rssi(MT_RXV4_RCPI0, rxdg3); > > status->chain_signal[1] = to_rssi(MT_RXV4_RCPI1, rxdg3); > > status->chain_signal[2] = to_rssi(MT_RXV4_RCPI2, rxdg3); > > status->chain_signal[3] = to_rssi(MT_RXV4_RCPI3, rxdg3); > > status->signal = status->chain_signal[0]; > > > > switch (status->chains) { > > case 0xf: > > status->signal = max(status->signal, > > status->chain_signal[3]); > > case 0x7: > > status->signal = max(status->signal, > > status->chain_signal[2]); > > case 0x3: > > status->signal = max(status->signal, > > status->chain_signal[1]); > > break; > > default: > > break; > > } > > > > > > I could send a v2 or you can take care of that. > > > > Ryder > > > >
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c index b60d42b5923d..9ee83ea11b8c --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c @@ -13,6 +13,11 @@ #include "../dma.h" #include "mac.h" +static inline s8 to_rssi(u32 field, u32 rxv) +{ + return (FIELD_GET(field, rxv) - 220) / 2; +} + static struct mt76_wcid *mt7615_rx_get_wcid(struct mt7615_dev *dev, u8 idx, bool unicast) { @@ -120,6 +125,7 @@ int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb) if (rxd0 & MT_RXD0_NORMAL_GROUP_3) { u32 rxdg0 = le32_to_cpu(rxd[0]); u32 rxdg1 = le32_to_cpu(rxd[1]); + u32 rxdg3 = le32_to_cpu(rxd[3]); u8 stbc = FIELD_GET(MT_RXV1_HT_STBC, rxdg0); bool cck = false; @@ -169,7 +175,29 @@ int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb) status->enc_flags |= RX_ENC_FLAG_STBC_MASK * stbc; - /* TODO: RSSI */ + status->chains = dev->mt76.antenna_mask; + status->chain_signal[0] = to_rssi(MT_RXV4_RCPI0, rxdg3); + status->signal = status->chain_signal[0]; + + switch (status->chains) { + case 0x3: + status->chain_signal[1] = to_rssi(MT_RXV4_RCPI1, rxdg3); + status->signal = max(status->signal, + status->chain_signal[1]); + break; + case 0x7: + status->chain_signal[2] = to_rssi(MT_RXV4_RCPI2, rxdg3); + status->signal = max(status->signal, + status->chain_signal[2]); + break; + case 0xf: + status->chain_signal[3] = to_rssi(MT_RXV4_RCPI3, rxdg3); + status->signal = max(status->signal, + status->chain_signal[3]); + break; + default: + break; + } rxd += 6; if ((u8 *)rxd - skb->data >= skb->len) return -EINVAL; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.h b/drivers/net/wireless/mediatek/mt76/mt7615/mac.h index 18ad4b8a3807..b00ce8db58e9 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.h @@ -98,6 +98,11 @@ enum rx_pkt_type { #define MT_RXV2_GROUP_ID GENMASK(26, 21) #define MT_RXV2_LENGTH GENMASK(20, 0) +#define MT_RXV4_RCPI3 GENMASK(31, 24) +#define MT_RXV4_RCPI2 GENMASK(23, 16) +#define MT_RXV4_RCPI1 GENMASK(15, 8) +#define MT_RXV4_RCPI0 GENMASK(7, 0) + enum tx_header_format { MT_HDR_FORMAT_802_3, MT_HDR_FORMAT_CMD,
Fill in RX status->chain_signal to avoid empty value. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> --- .../net/wireless/mediatek/mt76/mt7615/mac.c | 30 ++++++++++++++++++- .../net/wireless/mediatek/mt76/mt7615/mac.h | 5 ++++ 2 files changed, 34 insertions(+), 1 deletion(-)