diff mbox series

[6/6] arm64: dts: renesas: hihope-rzg2-ex: Enable CAN interfaces

Message ID 1560513214-28031-7-git-send-email-fabrizio.castro@bp.renesas.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series More CAN support for RZ/G2 devices | expand

Commit Message

Fabrizio Castro June 14, 2019, 11:53 a.m. UTC 
This patch enables both CAN0 and CAN1, both exposed via
connectors found on the expansion board.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
---
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Geert Uytterhoeven July 8, 2019, 1:08 p.m. UTC | #1 
On Fri, Jun 14, 2019 at 1:54 PM Fabrizio Castro
<fabrizio.castro@bp.renesas.com> wrote:
> This patch enables both CAN0 and CAN1, both exposed via
> connectors found on the expansion board.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
I.e. applied and queued for v5.4.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index 07a6eea..4280b19 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -31,6 +31,18 @@ 
 	};
 };
 
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &pciec0 {
 	status = "okay";
 };
@@ -60,4 +72,14 @@ 
 			drive-strength = <12>;
 		};
 	};
+
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
 };