diff mbox series

[v2,2/2] arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line

Message ID 20190615104351.6844-3-martin.blumenstingl@googlemail.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: g12a/g12b: add the Ethernet PHY GPIO IRQs | expand

Commit Message

Martin Blumenstingl June 15, 2019, 10:43 a.m. UTC 
X96 Max has the PHY reset and interrupt lines are identical to the
Odroid-N2:
- GPIOZ_14 is the interrupt on X96 Max
- GPIOZ_15 is the reset line on X96 Max

Add GPIOZ_14 as PHY interrupt line on the X96 Max so we don't have to
poll for the PHY status.

Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 3f9385553132..fe4013cca876 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -289,6 +289,10 @@ 
 		reset-assert-us = <10000>;
 		reset-deassert-us = <30000>;
 		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 	};
 };