@@ -315,33 +315,33 @@ static unsigned long cpg_sd_clock_recalc_rate(struct clk_hw *hw,
clock->div_table[clock->cur_div_idx].div);
}
-static unsigned int cpg_sd_clock_calc_div(struct sd_clock *clock,
- unsigned long rate,
- unsigned long parent_rate)
+static int cpg_sd_clock_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
- unsigned long calc_rate, diff, diff_min = ULONG_MAX;
- unsigned int i, best_div = 0;
+ unsigned long best_rate = ULONG_MAX, diff_min = ULONG_MAX;
+ unsigned long calc_rate, diff;
+ struct sd_clock *clock = to_sd_clock(hw);
+ unsigned int i;
for (i = 0; i < clock->div_num; i++) {
- calc_rate = DIV_ROUND_CLOSEST(parent_rate,
+ calc_rate = DIV_ROUND_CLOSEST(req->best_parent_rate,
clock->div_table[i].div);
- diff = calc_rate > rate ? calc_rate - rate : rate - calc_rate;
+ if (calc_rate < req->min_rate || calc_rate > req->max_rate)
+ continue;
+
+ diff = calc_rate > req->rate ? calc_rate - req->rate
+ : req->rate - calc_rate;
if (diff < diff_min) {
- best_div = clock->div_table[i].div;
+ best_rate = calc_rate;
diff_min = diff;
}
}
- return best_div;
-}
-
-static long cpg_sd_clock_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
-{
- struct sd_clock *clock = to_sd_clock(hw);
- unsigned int div = cpg_sd_clock_calc_div(clock, rate, *parent_rate);
+ if (best_rate == ULONG_MAX)
+ return -EINVAL;
- return DIV_ROUND_CLOSEST(*parent_rate, div);
+ req->rate = best_rate;
+ return 0;
}
static int cpg_sd_clock_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -372,7 +372,7 @@ static const struct clk_ops cpg_sd_clock_ops = {
.disable = cpg_sd_clock_disable,
.is_enabled = cpg_sd_clock_is_enabled,
.recalc_rate = cpg_sd_clock_recalc_rate,
- .round_rate = cpg_sd_clock_round_rate,
+ .determine_rate = cpg_sd_clock_determine_rate,
.set_rate = cpg_sd_clock_set_rate,
};
As the .round_rate() callback returns a long clock rate, it cannot return clock rates that do not fit in signed long, but do fit in unsigned long. Hence switch the SD clocks on R-Car Gen3 from the old .round_rate() callback to the newer .determine_rate() callback, which does not suffer from this limitation. This includes implementing range checking. Absorb cpg_sd_clock_calc_div() into cpg_sd_clock_determine_rate(), and replace the best divider by the best rate to avoid repeating one division. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/clk/renesas/rcar-gen3-cpg.c | 36 ++++++++++++++--------------- 1 file changed, 18 insertions(+), 18 deletions(-)