[PATCHv6,3/9] nl80211: Add netlink attribute for AMPDU aggregation enable/disable
diff mbox series

Message ID 1560835632-17405-4-git-send-email-tamizhr@codeaurora.org
State New
Headers show
Series
  • cfg80211/mac80211: Add support for TID specific configuration
Related show

Commit Message

Tamizh chelvam June 18, 2019, 5:27 a.m. UTC
Introduce NL80211_TID_ATTR_CONFIG_AMPDU_CTRL in nl80211_attr_tid_config
to accept TID specific AMPDU aggregation enable/disable configuration
through NL80211_CMD_SET_TID_CONFIG command. TID for which the
aggregation control configuration is to be applied is passed in
NL80211_TID_ATTR_CONFIG_TID attribute. When the user-space wants this
configuration peer specific rather than being applied for all the
connected stations, MAC address of the peer can be passed in
NL80211_ATTR_MAC attribute.

Driver supporting this feature should advertise
NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per-STA data TID
ampdu configuration should advertise NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
 include/net/cfg80211.h       |    3 +++
 include/uapi/linux/nl80211.h |   22 ++++++++++++++++++++++
 net/wireless/nl80211.c       |   25 +++++++++++++++++++++++++
 3 files changed, 50 insertions(+)

Comments

Johannes Berg July 31, 2019, 9:28 a.m. UTC | #1
On Tue, 2019-06-18 at 10:57 +0530, Tamizh chelvam wrote:
> 
> +		if (!wiphy_ext_feature_isset(&rdev->wiphy,
> +				NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL)) {
> +			NL_SET_ERR_MSG_ATTR(extack,
> +					    attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL],
> +					    "TID specific configuration not "
> +					    "supported");
> +			return -ENOTSUPP;
> +		}
> +
> +		if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
> +				NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL)) {
> +			NL_SET_ERR_MSG_ATTR(extack,
> +					    attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL],
> +					    "peer specfic TID configuration not "
> +					    "supported");
> +			return -ENOTSUPP;
> +		}

I think you should probably make this be a function to which you pass
the attribute pointer and feature flags.

err = nl80211_check_tid_config_supported(extack,
					 attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL],
					 NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL,
					 NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL);

since you have this code a lot?

johannes
Tamizh chelvam Aug. 10, 2019, 12:41 p.m. UTC | #2
On 2019-07-31 14:58, Johannes Berg wrote:
> On Tue, 2019-06-18 at 10:57 +0530, Tamizh chelvam wrote:
>> 
>> +		if (!wiphy_ext_feature_isset(&rdev->wiphy,
>> +				NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL)) {
>> +			NL_SET_ERR_MSG_ATTR(extack,
>> +					    attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL],
>> +					    "TID specific configuration not "
>> +					    "supported");
>> +			return -ENOTSUPP;
>> +		}
>> +
>> +		if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
>> +				NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL)) {
>> +			NL_SET_ERR_MSG_ATTR(extack,
>> +					    attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL],
>> +					    "peer specfic TID configuration not "
>> +					    "supported");
>> +			return -ENOTSUPP;
>> +		}
> 
> I think you should probably make this be a function to which you pass
> the attribute pointer and feature flags.
> 
> err = nl80211_check_tid_config_supported(extack,
> 					 attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL],
> 					 NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL,
> 					 NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL);
> 
> since you have this code a lot?
> 
Sure, I will make that change in the next version of patchset.

Thanks,
Tamizh.

Patch
diff mbox series

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 91bcb07..d2814e8 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -528,6 +528,7 @@  struct cfg80211_chan_def {
 enum ieee80211_tid_conf_mask {
 	IEEE80211_TID_CONF_NOACK	= BIT(0),
 	IEEE80211_TID_CONF_RETRY	= BIT(1),
+	IEEE80211_TID_CONF_AMPDU	= BIT(2),
 };
 
 /**
@@ -538,6 +539,7 @@  enum ieee80211_tid_conf_mask {
  * @noack: noack configuration value for the TID
  * @retry_long: retry count value
  * @retry_short: retry count value
+ * @ampdu: Enable/Disable aggregation
  */
 struct ieee80211_tid_cfg {
 	u8 tid;
@@ -545,6 +547,7 @@  struct ieee80211_tid_cfg {
 	u8 noack;
 	int retry_long;
 	int retry_short;
+	u8 ampdu;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index d30d7c9..465dbc6 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4712,6 +4712,21 @@  enum nl80211_tid_config {
  *	the max value should be advertised by the driver through
  *	max_data_retry_count. when this attribute is not present, the driver
  *	would use the default configuration.
+ * @NL80211_TID_ATTR_CONFIG_AMPDU_CTRL: Enable/Disable aggregation for the TID
+ *	specified in %%NL80211_TID_ATTR_CONFIG_TID. Its type is u8,
+ *	if the peer MAC address	is passed in %NL80211_ATTR_MAC, the aggregation
+ *	configuration is applied
+ *	to the data frame for the tid to that connected station.
+ *	Station specific aggregation configuration is valid only for STA's
+ *	current connection. i.e. the configuration will be reset to default when
+ *	the station connects back after disconnection/roaming.
+ *	when user-space does not include %NL80211_ATTR_MAC, this configuration
+ *	should be treated as per-netdev configuration. This configuration will
+ *	be cleared when the interface goes down and on the disconnection from a
+ *	BSS. Driver supporting this feature should advertise
+ *	NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL and supporting per station
+ *	aggregation configuration should advertise
+ *	NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL.
  */
 enum nl80211_tid_attr_config {
 	__NL80211_TID_ATTR_INVALID,
@@ -4720,6 +4735,7 @@  enum nl80211_tid_attr_config {
 	NL80211_TID_ATTR_CONFIG_RETRY,
 	NL80211_TID_ATTR_CONFIG_RETRY_SHORT,
 	NL80211_TID_ATTR_CONFIG_RETRY_LONG,
+	NL80211_TID_ATTR_CONFIG_AMPDU_CTRL,
 
 	/* keep last */
 	__NL80211_TID_ATTR_CONFIG_AFTER_LAST,
@@ -5545,6 +5561,10 @@  enum nl80211_feature_flags {
  *	count functionality.
  * @NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG: Driver supports STA specific
  *	data retry count functionality.
+ * @NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL: Driver supports TID specific
+ *	aggregation control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL: Driver supports per STA
+ *	specific TID aggregation control(enable/disable).
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5595,6 +5615,8 @@  enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_PER_STA_NOACK_CONFIG,
 	NL80211_EXT_FEATURE_PER_TID_RETRY_CONFIG,
 	NL80211_EXT_FEATURE_PER_STA_RETRY_CONFIG,
+	NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL,
+	NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index a21a4f4..a8982de 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -289,6 +289,8 @@  static int validate_ie_attr(const struct nlattr *attr,
 	[NL80211_TID_ATTR_CONFIG_RETRY] = { .type = NLA_FLAG },
 	[NL80211_TID_ATTR_CONFIG_RETRY_SHORT] = NLA_POLICY_MIN(NLA_U8, 0),
 	[NL80211_TID_ATTR_CONFIG_RETRY_LONG] = NLA_POLICY_MIN(NLA_U8, 0),
+	[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL] =
+			NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
 };
 
 const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -13661,6 +13663,29 @@  static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 		}
 	}
 
+	if (attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL]) {
+		if (!wiphy_ext_feature_isset(&rdev->wiphy,
+				NL80211_EXT_FEATURE_PER_TID_AMPDU_CTRL)) {
+			NL_SET_ERR_MSG_ATTR(extack,
+					    attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL],
+					    "TID specific configuration not "
+					    "supported");
+			return -ENOTSUPP;
+		}
+
+		if (peer && !wiphy_ext_feature_isset(&rdev->wiphy,
+				NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL)) {
+			NL_SET_ERR_MSG_ATTR(extack,
+					    attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL],
+					    "peer specfic TID configuration not "
+					    "supported");
+			return -ENOTSUPP;
+		}
+
+		tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_AMPDU;
+		tid_conf->ampdu =
+			nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_AMPDU_CTRL]);
+	}
 	return 0;
 }