diff mbox series

[V6,23/27] arm64: tegra: Add PEX DPD states as pinctrl properties

Message ID 20190618180206.4908-24-mmaddireddy@nvidia.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show
Series Enable Tegra PCIe root port features | expand

Commit Message

Manikanta Maddireddy June 18, 2019, 6:02 p.m. UTC
Add PEX deep power down states as pinctrl properties to set in PCIe driver.
In Tegra210, BIAS pads are not in power down mode when clamps are applied.
To set the pads in DPD, pass the PEX DPD states as pinctrl properties to
PCIe driver.

Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V6: No change

V5: No change

V4: No change

V3: No change

V2: Using standard pinctrl names, default and idle

 arch/arm64/boot/dts/nvidia/tegra210.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Thierry Reding June 20, 2019, 10:14 a.m. UTC | #1
On Tue, Jun 18, 2019 at 11:32:02PM +0530, Manikanta Maddireddy wrote:
> Add PEX deep power down states as pinctrl properties to set in PCIe driver.
> In Tegra210, BIAS pads are not in power down mode when clamps are applied.
> To set the pads in DPD, pass the PEX DPD states as pinctrl properties to
> PCIe driver.
> 
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
> V6: No change
> 
> V5: No change
> 
> V4: No change
> 
> V3: No change
> 
> V2: Using standard pinctrl names, default and idle
> 
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)

Applied to for-5.3/arm64/dt, thanks.

Thierry
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index a550c0a4d572..3899c54ea28f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -48,6 +48,11 @@ 
 			 <&tegra_car 72>,
 			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
+
+		pinctrl-names = "default", "idle";
+		pinctrl-0 = <&pex_dpd_disable>;
+		pinctrl-1 = <&pex_dpd_enable>;
+
 		status = "disabled";
 
 		pci@1,0 {
@@ -848,6 +853,20 @@ 
 			pins = "sdmmc3";
 			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
 		};
+
+		pex_dpd_disable: pex_en {
+			pex-dpd-disable {
+				pins = "pex-bias", "pex-clk1", "pex-clk2";
+				low-power-disable;
+			};
+		};
+
+		pex_dpd_enable: pex_dis {
+			pex-dpd-enable {
+				pins = "pex-bias", "pex-clk1", "pex-clk2";
+				low-power-enable;
+			};
+		};
 	};
 
 	fuse@7000f800 {