[v3] pinctrl: qcom: Add irq_enable callback for msm gpio
diff mbox series

Message ID 1561472086-23360-1-git-send-email-neeraju@codeaurora.org
State Accepted
Commit 4b7618fdc7e6ac2832842df0cb512ebb067db977
Headers show
Series
  • [v3] pinctrl: qcom: Add irq_enable callback for msm gpio
Related show

Commit Message

Neeraj Upadhyay June 25, 2019, 2:14 p.m. UTC
From: Srinivas Ramana <sramana@codeaurora.org>

Introduce the irq_enable callback which will be same as irq_unmask
except that it will also clear the status bit before unmask.

This will help in clearing any erroneous interrupts that would
have got latched when the interrupt is not in use.

There may be devices like UART which can use the same gpio line
for data rx as well as a wakeup gpio when in suspend. The data that
was flowing on the line may latch the interrupt and when we enable
the interrupt before going to suspend, this would trigger the
unexpected interrupt. This change helps clearing the interrupt
so that these unexpected interrupts gets cleared.

Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
---

Changes since v2:
- Renamed function to msm_gpio_irq_clear_unmask()

 drivers/pinctrl/qcom/pinctrl-msm.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

Comments

Linus Walleij July 3, 2019, 8:26 a.m. UTC | #1
On Tue, Jun 25, 2019 at 4:14 PM Neeraj Upadhyay <neeraju@codeaurora.org> wrote:

> From: Srinivas Ramana <sramana@codeaurora.org>
>
> Introduce the irq_enable callback which will be same as irq_unmask
> except that it will also clear the status bit before unmask.
>
> This will help in clearing any erroneous interrupts that would
> have got latched when the interrupt is not in use.
>
> There may be devices like UART which can use the same gpio line
> for data rx as well as a wakeup gpio when in suspend. The data that
> was flowing on the line may latch the interrupt and when we enable
> the interrupt before going to suspend, this would trigger the
> unexpected interrupt. This change helps clearing the interrupt
> so that these unexpected interrupts gets cleared.
>
> Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
> Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
> ---
>
> Changes since v2:
> - Renamed function to msm_gpio_irq_clear_unmask()

Patch applied, unless Bjorn complains!

Yours,
Linus Walleij

Patch
diff mbox series

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 6e319bc..0223755 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -729,7 +729,7 @@  static void msm_gpio_irq_mask(struct irq_data *d)
 	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
 }
 
-static void msm_gpio_irq_unmask(struct irq_data *d)
+static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
 	struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
@@ -741,6 +741,17 @@  static void msm_gpio_irq_unmask(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
+	if (status_clear) {
+		/*
+		 * clear the interrupt status bit before unmask to avoid
+		 * any erroneous interrupts that would have got latched
+		 * when the interrupt is not in use.
+		 */
+		val = msm_readl_intr_status(pctrl, g);
+		val &= ~BIT(g->intr_status_bit);
+		msm_writel_intr_status(val, pctrl, g);
+	}
+
 	val = msm_readl_intr_cfg(pctrl, g);
 	val |= BIT(g->intr_raw_status_bit);
 	val |= BIT(g->intr_enable_bit);
@@ -751,6 +762,17 @@  static void msm_gpio_irq_unmask(struct irq_data *d)
 	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
 }
 
+static void msm_gpio_irq_enable(struct irq_data *d)
+{
+
+	msm_gpio_irq_clear_unmask(d, true);
+}
+
+static void msm_gpio_irq_unmask(struct irq_data *d)
+{
+	msm_gpio_irq_clear_unmask(d, false);
+}
+
 static void msm_gpio_irq_ack(struct irq_data *d)
 {
 	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
@@ -978,6 +1000,7 @@  static int msm_gpio_init(struct msm_pinctrl *pctrl)
 	chip->need_valid_mask = msm_gpio_needs_valid_mask(pctrl);
 
 	pctrl->irq_chip.name = "msmgpio";
+	pctrl->irq_chip.irq_enable = msm_gpio_irq_enable;
 	pctrl->irq_chip.irq_mask = msm_gpio_irq_mask;
 	pctrl->irq_chip.irq_unmask = msm_gpio_irq_unmask;
 	pctrl->irq_chip.irq_ack = msm_gpio_irq_ack;