[v4,2/2] fpga: dfl: fme: add performance reporting support
diff mbox series

Message ID 1561612195-6081-3-git-send-email-hao.wu@intel.com
State Superseded, archived
Headers show
Series
  • add performance reporting support to FPGA DFL drivers
Related show

Commit Message

Wu Hao June 27, 2019, 5:09 a.m. UTC
This patch adds support for performance reporting private feature
for FPGA Management Engine (FME). Now it supports several different
performance counters, including 'basic', 'cache', 'fabric', 'vtd'
and 'vtd_sip'. It allows user to use standard linux tools to access
these performance counters.

e.g. List all events by "perf list"

  perf list | grep fme

  fme0/cache_read_hit/                         [Kernel PMU event]
  fme0/cache_read_miss/                        [Kernel PMU event]
  ...

  fme0/fab_mmio_read/                          [Kernel PMU event]
  fme0/fab_mmio_write/                         [Kernel PMU event]
  ...

  fme0/fab_port_mmio_read,portid=?/            [Kernel PMU event]
  fme0/fab_port_mmio_write,portid=?/           [Kernel PMU event]
  ...

  fme0/vtd_port_devtlb_1g_fill,portid=?/       [Kernel PMU event]
  fme0/vtd_port_devtlb_2m_fill,portid=?/       [Kernel PMU event]
  ...

  fme0/vtd_sip_iotlb_1g_hit/                   [Kernel PMU event]
  fme0/vtd_sip_iotlb_1g_miss/                  [Kernel PMU event]
  ...

  fme0/clock                                   [Kernel PMU event]
  ...

e.g. check increased counter value after run one application using
"perf stat" command.

 perf stat -e fme0/fab_mmio_read/,fme0/fab_mmio_write/, ./test

 Performance counter stats for './test':

                 1      fme0/fab_mmio_read/
                 2      fme0/fab_mmio_write/

       1.009496520 seconds time elapsed

Please note that fabric counters support both fab_* and fab_port_*, but
actually they are sharing one set of performance counters in hardware.
If user wants to monitor overall data events on fab_* then fab_port_*
can't be supported at the same time, see example below:

perf stat -e fme0/fab_mmio_read/,fme0/fab_port_mmio_write,portid=0/

 Performance counter stats for 'system wide':

                 0      fme0/fab_mmio_read/
   <not supported>      fme0/fab_port_mmio_write,portid=0/

       2.141064085 seconds time elapsed

Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
---
v3: replace scnprintf with sprintf in sysfs interfaces.
    update sysfs doc kernel version and date.
    fix sysfs doc issue for fabric counter.
    refine PERF_OBJ_ATTR_* macro, doesn't count on __ATTR anymore.
    introduce PERF_OBJ_ATTR_F_* macro, as it needs to use different
    filenames for some of the sysfs attributes.
    remove kobject_del when destroy kobject, kobject_put is enough.
    do sysfs_remove_groups first when destroying perf_obj.
    WARN_ON_ONCE in case internal parms are wrong in read_*_count().
v4: rework this patch to use standard perf API as user interfaces.
---
 drivers/fpga/Makefile       |   1 +
 drivers/fpga/dfl-fme-main.c |   4 +
 drivers/fpga/dfl-fme-perf.c | 871 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/fpga/dfl-fme.h      |   2 +
 4 files changed, 878 insertions(+)
 create mode 100644 drivers/fpga/dfl-fme-perf.c

Comments

Greg KH June 27, 2019, 4:53 p.m. UTC | #1
On Thu, Jun 27, 2019 at 01:09:55PM +0800, Wu Hao wrote:
> This patch adds support for performance reporting private feature
> for FPGA Management Engine (FME). Now it supports several different
> performance counters, including 'basic', 'cache', 'fabric', 'vtd'
> and 'vtd_sip'. It allows user to use standard linux tools to access
> these performance counters.
> 
> e.g. List all events by "perf list"
> 
>   perf list | grep fme
> 
>   fme0/cache_read_hit/                         [Kernel PMU event]
>   fme0/cache_read_miss/                        [Kernel PMU event]
>   ...
> 
>   fme0/fab_mmio_read/                          [Kernel PMU event]
>   fme0/fab_mmio_write/                         [Kernel PMU event]
>   ...
> 
>   fme0/fab_port_mmio_read,portid=?/            [Kernel PMU event]
>   fme0/fab_port_mmio_write,portid=?/           [Kernel PMU event]
>   ...
> 
>   fme0/vtd_port_devtlb_1g_fill,portid=?/       [Kernel PMU event]
>   fme0/vtd_port_devtlb_2m_fill,portid=?/       [Kernel PMU event]
>   ...
> 
>   fme0/vtd_sip_iotlb_1g_hit/                   [Kernel PMU event]
>   fme0/vtd_sip_iotlb_1g_miss/                  [Kernel PMU event]
>   ...
> 
>   fme0/clock                                   [Kernel PMU event]
>   ...
> 
> e.g. check increased counter value after run one application using
> "perf stat" command.
> 
>  perf stat -e fme0/fab_mmio_read/,fme0/fab_mmio_write/, ./test
> 
>  Performance counter stats for './test':
> 
>                  1      fme0/fab_mmio_read/
>                  2      fme0/fab_mmio_write/
> 
>        1.009496520 seconds time elapsed
> 
> Please note that fabric counters support both fab_* and fab_port_*, but
> actually they are sharing one set of performance counters in hardware.
> If user wants to monitor overall data events on fab_* then fab_port_*
> can't be supported at the same time, see example below:
> 
> perf stat -e fme0/fab_mmio_read/,fme0/fab_port_mmio_write,portid=0/
> 
>  Performance counter stats for 'system wide':
> 
>                  0      fme0/fab_mmio_read/
>    <not supported>      fme0/fab_port_mmio_write,portid=0/
> 
>        2.141064085 seconds time elapsed
> 
> Signed-off-by: Luwei Kang <luwei.kang@intel.com>
> Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> Signed-off-by: Wu Hao <hao.wu@intel.com>
> ---
> v3: replace scnprintf with sprintf in sysfs interfaces.
>     update sysfs doc kernel version and date.
>     fix sysfs doc issue for fabric counter.
>     refine PERF_OBJ_ATTR_* macro, doesn't count on __ATTR anymore.
>     introduce PERF_OBJ_ATTR_F_* macro, as it needs to use different
>     filenames for some of the sysfs attributes.
>     remove kobject_del when destroy kobject, kobject_put is enough.
>     do sysfs_remove_groups first when destroying perf_obj.
>     WARN_ON_ONCE in case internal parms are wrong in read_*_count().
> v4: rework this patch to use standard perf API as user interfaces.
> ---
>  drivers/fpga/Makefile       |   1 +
>  drivers/fpga/dfl-fme-main.c |   4 +
>  drivers/fpga/dfl-fme-perf.c | 871 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/fpga/dfl-fme.h      |   2 +
>  4 files changed, 878 insertions(+)
>  create mode 100644 drivers/fpga/dfl-fme-perf.c
> 
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 4865b74..d8e21df 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -40,6 +40,7 @@ obj-$(CONFIG_FPGA_DFL_FME_REGION)	+= dfl-fme-region.o
>  obj-$(CONFIG_FPGA_DFL_AFU)		+= dfl-afu.o
>  
>  dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o dfl-fme-error.o
> +dfl-fme-objs += dfl-fme-perf.o
>  dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
>  dfl-afu-objs += dfl-afu-error.o
>  
> diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> index 9225b68..a11c112 100644
> --- a/drivers/fpga/dfl-fme-main.c
> +++ b/drivers/fpga/dfl-fme-main.c
> @@ -639,6 +639,10 @@ static void fme_power_mgmt_uinit(struct platform_device *pdev,
>  		.ops = &fme_power_mgmt_ops,
>  	},
>  	{
> +		.id_table = fme_perf_id_table,
> +		.ops = &fme_perf_ops,
> +	},
> +	{
>  		.ops = NULL,
>  	},
>  };
> diff --git a/drivers/fpga/dfl-fme-perf.c b/drivers/fpga/dfl-fme-perf.c
> new file mode 100644
> index 0000000..0d7768a
> --- /dev/null
> +++ b/drivers/fpga/dfl-fme-perf.c
> @@ -0,0 +1,871 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for FPGA Management Engine (FME) Global Performance Reporting
> + *
> + * Copyright 2019 Intel Corporation, Inc.
> + *
> + * Authors:
> + *   Kang Luwei <luwei.kang@intel.com>
> + *   Xiao Guangrong <guangrong.xiao@linux.intel.com>
> + *   Wu Hao <hao.wu@intel.com>
> + *   Xu Yilun <yilun.xu@intel.com>
> + *   Joseph Grecco <joe.grecco@intel.com>
> + *   Enno Luebbers <enno.luebbers@intel.com>
> + *   Tim Whisonant <tim.whisonant@intel.com>
> + *   Ananda Ravuri <ananda.ravuri@intel.com>
> + *   Mitchel, Henry <henry.mitchel@intel.com>
> + */
> +
> +#include <linux/perf_event.h>
> +#include "dfl.h"
> +#include "dfl-fme.h"
> +
> +/*
> + * Performance Counter Registers for Cache.
> + *
> + * Cache Events are listed below as CACHE_EVNT_*.
> + */
> +#define CACHE_CTRL			0x8
> +#define CACHE_RESET_CNTR		BIT_ULL(0)
> +#define CACHE_FREEZE_CNTR		BIT_ULL(8)
> +#define CACHE_CTRL_EVNT			GENMASK_ULL(19, 16)
> +#define CACHE_EVNT_RD_HIT		0x0
> +#define CACHE_EVNT_WR_HIT		0x1
> +#define CACHE_EVNT_RD_MISS		0x2
> +#define CACHE_EVNT_WR_MISS		0x3
> +#define CACHE_EVNT_RSVD			0x4
> +#define CACHE_EVNT_HOLD_REQ		0x5
> +#define CACHE_EVNT_DATA_WR_PORT_CONTEN	0x6
> +#define CACHE_EVNT_TAG_WR_PORT_CONTEN	0x7
> +#define CACHE_EVNT_TX_REQ_STALL		0x8
> +#define CACHE_EVNT_RX_REQ_STALL		0x9
> +#define CACHE_EVNT_EVICTIONS		0xa
> +#define CACHE_CHANNEL_SEL		BIT_ULL(20)
> +#define CACHE_CHANNEL_RD		0
> +#define CACHE_CHANNEL_WR		1
> +#define CACHE_CNTR0			0x10
> +#define CACHE_CNTR1			0x18
> +#define CACHE_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
> +#define CACHE_CNTR_EVNT			GENMASK_ULL(63, 60)
> +
> +/*
> + * Performance Counter Registers for Fabric.
> + *
> + * Fabric Events are listed below as FAB_EVNT_*
> + */
> +#define FAB_CTRL			0x20
> +#define FAB_RESET_CNTR			BIT_ULL(0)
> +#define FAB_FREEZE_CNTR			BIT_ULL(8)
> +#define FAB_CTRL_EVNT			GENMASK_ULL(19, 16)
> +#define FAB_EVNT_PCIE0_RD		0x0
> +#define FAB_EVNT_PCIE0_WR		0x1
> +#define FAB_EVNT_PCIE1_RD		0x2
> +#define FAB_EVNT_PCIE1_WR		0x3
> +#define FAB_EVNT_UPI_RD			0x4
> +#define FAB_EVNT_UPI_WR			0x5
> +#define FAB_EVNT_MMIO_RD		0x6
> +#define FAB_EVNT_MMIO_WR		0x7
> +#define FAB_PORT_ID			GENMASK_ULL(21, 20)
> +#define FAB_PORT_FILTER			BIT_ULL(23)
> +#define FAB_PORT_FILTER_DISABLE		0
> +#define FAB_PORT_FILTER_ENABLE		1
> +#define FAB_CNTR			0x28
> +#define FAB_CNTR_EVNT_CNTR		GENMASK_ULL(59, 0)
> +#define FAB_CNTR_EVNT			GENMASK_ULL(63, 60)
> +
> +/*
> + * Performance Counter Registers for Clock.
> + *
> + * Clock Counter can't be reset or frozen by SW.
> + */
> +#define CLK_CNTR			0x30
> +#define BASIC_EVNT_CLK			0x0
> +
> +/*
> + * Performance Counter Registers for IOMMU / VT-D.
> + *
> + * VT-D Events are listed below as VTD_EVNT_* and VTD_SIP_EVNT_*
> + */
> +#define VTD_CTRL			0x38
> +#define VTD_RESET_CNTR			BIT_ULL(0)
> +#define VTD_FREEZE_CNTR			BIT_ULL(8)
> +#define VTD_CTRL_EVNT			GENMASK_ULL(19, 16)
> +#define VTD_EVNT_AFU_MEM_RD_TRANS	0x0
> +#define VTD_EVNT_AFU_MEM_WR_TRANS	0x1
> +#define VTD_EVNT_AFU_DEVTLB_RD_HIT	0x2
> +#define VTD_EVNT_AFU_DEVTLB_WR_HIT	0x3
> +#define VTD_EVNT_DEVTLB_4K_FILL		0x4
> +#define VTD_EVNT_DEVTLB_2M_FILL		0x5
> +#define VTD_EVNT_DEVTLB_1G_FILL		0x6
> +#define VTD_CNTR			0x40
> +#define VTD_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
> +#define VTD_CNTR_EVNT			GENMASK_ULL(63, 60)
> +
> +#define VTD_SIP_CTRL			0x48
> +#define VTD_SIP_RESET_CNTR		BIT_ULL(0)
> +#define VTD_SIP_FREEZE_CNTR		BIT_ULL(8)
> +#define VTD_SIP_CTRL_EVNT		GENMASK_ULL(19, 16)
> +#define VTD_SIP_EVNT_IOTLB_4K_HIT	0x0
> +#define VTD_SIP_EVNT_IOTLB_2M_HIT	0x1
> +#define VTD_SIP_EVNT_IOTLB_1G_HIT	0x2
> +#define VTD_SIP_EVNT_SLPWC_L3_HIT	0x3
> +#define VTD_SIP_EVNT_SLPWC_L4_HIT	0x4
> +#define VTD_SIP_EVNT_RCC_HIT		0x5
> +#define VTD_SIP_EVNT_IOTLB_4K_MISS	0x6
> +#define VTD_SIP_EVNT_IOTLB_2M_MISS	0x7
> +#define VTD_SIP_EVNT_IOTLB_1G_MISS	0x8
> +#define VTD_SIP_EVNT_SLPWC_L3_MISS	0x9
> +#define VTD_SIP_EVNT_SLPWC_L4_MISS	0xa
> +#define VTD_SIP_EVNT_RCC_MISS		0xb
> +#define VTD_SIP_CNTR			0X50
> +#define VTD_SIP_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
> +#define VTD_SIP_CNTR_EVNT		GENMASK_ULL(63, 60)
> +
> +#define PERF_TIMEOUT			30
> +
> +#define PERF_MAX_PORT_NUM		1
> +
> +/**
> + * struct fme_perf_priv - priv data structure for fme perf driver
> + *
> + * @dev: parent device.
> + * @ioaddr: mapped base address of mmio region.
> + * @pmu: pmu data structure for fme perf counters.
> + * @id: id of this fme performance report private feature.
> + * @fab_users: current user number on fabric counters.
> + * @fab_port_id: used to indicate current working mode of fabric counters.
> + * @fab_lock: lock to protect fabric counters working mode.
> + * @events_group: events attribute group for fme perf pmu.
> + * @attr_groups: attribute groups for fme perf pmu.
> + */
> +struct fme_perf_priv {
> +	struct device *dev;
> +	void __iomem *ioaddr;
> +	struct pmu pmu;
> +	u64 id;
> +
> +	u32 fab_users;
> +	u32 fab_port_id;
> +	spinlock_t fab_lock;
> +
> +	struct attribute_group events_group;
> +	const struct attribute_group *attr_groups[4];
> +};
> +
> +/**
> + * struct fme_perf_event_attr - fme perf event attribute
> + *
> + * @attr: device attribute of fme perf event.
> + * @event_id: id of fme perf event.
> + * @event_type: type of fme perf event.
> + * @is_port_event: indicate if this is a port based event.
> + * @data: private data for fme perf event.
> + */
> +struct fme_perf_event_attr {
> +	struct device_attribute attr;
> +	u32 event_id;
> +	u32 event_type;
> +	bool is_port_event;
> +	u64 data;
> +};
> +
> +/**
> + * struct fme_perf_event_ops - callbacks for fme perf events
> + *
> + * @event_init: callback invoked during event init.
> + * @event_destroy: callback invoked during event destroy.
> + * @read_counter: callback to read hardware counters.
> + */
> +struct fme_perf_event_ops {
> +	int (*event_init)(struct fme_perf_priv *priv, u32 event,
> +			  u32 port_id, u64 data);
> +	void (*event_destroy)(struct fme_perf_priv *priv, u32 event,
> +			      u32 port_id, u64 data);
> +	u64 (*read_counter)(struct fme_perf_priv *priv, u32 event,
> +			    u32 port_id, u64 data);
> +};
> +
> +/**
> + * struct fme_perf_event_group - fme perf groups
> + *
> + * @ev_attrs: fme perf event attributes.
> + * @num: events number in this group.
> + * @ops: same callbacks shared by all fme perf events in this group.
> + */
> +struct fme_perf_event_group {
> +	struct fme_perf_event_attr *ev_attrs;
> +	unsigned int num;
> +	struct fme_perf_event_ops *ops;
> +};
> +
> +#define to_fme_perf_priv(_pmu)	container_of(_pmu, struct fme_perf_priv, pmu)
> +
> +static cpumask_t fme_perf_cpumask = CPU_MASK_CPU0;
> +
> +static ssize_t cpumask_show(struct device *dev,
> +			    struct device_attribute *attr, char *buf)
> +{
> +	return cpumap_print_to_pagebuf(true, buf, &fme_perf_cpumask);
> +}
> +static DEVICE_ATTR_RO(cpumask);
> +
> +static struct attribute *fme_perf_cpumask_attrs[] = {
> +	&dev_attr_cpumask.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group fme_perf_cpumask_group = {
> +	.attrs = fme_perf_cpumask_attrs,
> +};
> +
> +#define FME_EVENT_MASK		GENMASK_ULL(11, 0)
> +#define FME_EVTYPE_MASK		GENMASK_ULL(15, 12)
> +#define FME_EVTYPE_BASIC	0
> +#define FME_EVTYPE_CACHE	1
> +#define FME_EVTYPE_FABRIC	2
> +#define FME_EVTYPE_VTD		3
> +#define FME_EVTYPE_VTD_SIP	4
> +#define FME_EVTYPE_MAX		FME_EVTYPE_VTD_SIP
> +#define FME_PORTID_MASK		GENMASK_ULL(23, 16)
> +#define FME_PORTID_ROOT		(0xffU)
> +
> +PMU_FORMAT_ATTR(event,		"config:0-11");
> +PMU_FORMAT_ATTR(evtype,		"config:12-15");
> +PMU_FORMAT_ATTR(portid,		"config:16-23");
> +
> +static struct attribute *fme_perf_format_attrs[] = {
> +	&format_attr_event.attr,
> +	&format_attr_evtype.attr,
> +	&format_attr_portid.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group fme_perf_format_group = {
> +	.name = "format",
> +	.attrs = fme_perf_format_attrs,
> +};

No Documentation/ABI/ entries for these sysfs files?

thanks,

greg k-h
Wu Hao June 28, 2019, 12:13 a.m. UTC | #2
On Fri, Jun 28, 2019 at 12:53:29AM +0800, Greg KH wrote:
> On Thu, Jun 27, 2019 at 01:09:55PM +0800, Wu Hao wrote:
> > This patch adds support for performance reporting private feature
> > for FPGA Management Engine (FME). Now it supports several different
> > performance counters, including 'basic', 'cache', 'fabric', 'vtd'
> > and 'vtd_sip'. It allows user to use standard linux tools to access
> > these performance counters.
> > 
> > e.g. List all events by "perf list"
> > 
> >   perf list | grep fme
> > 
> >   fme0/cache_read_hit/                         [Kernel PMU event]
> >   fme0/cache_read_miss/                        [Kernel PMU event]
> >   ...
> > 
> >   fme0/fab_mmio_read/                          [Kernel PMU event]
> >   fme0/fab_mmio_write/                         [Kernel PMU event]
> >   ...
> > 
> >   fme0/fab_port_mmio_read,portid=?/            [Kernel PMU event]
> >   fme0/fab_port_mmio_write,portid=?/           [Kernel PMU event]
> >   ...
> > 
> >   fme0/vtd_port_devtlb_1g_fill,portid=?/       [Kernel PMU event]
> >   fme0/vtd_port_devtlb_2m_fill,portid=?/       [Kernel PMU event]
> >   ...
> > 
> >   fme0/vtd_sip_iotlb_1g_hit/                   [Kernel PMU event]
> >   fme0/vtd_sip_iotlb_1g_miss/                  [Kernel PMU event]
> >   ...
> > 
> >   fme0/clock                                   [Kernel PMU event]
> >   ...
> > 
> > e.g. check increased counter value after run one application using
> > "perf stat" command.
> > 
> >  perf stat -e fme0/fab_mmio_read/,fme0/fab_mmio_write/, ./test
> > 
> >  Performance counter stats for './test':
> > 
> >                  1      fme0/fab_mmio_read/
> >                  2      fme0/fab_mmio_write/
> > 
> >        1.009496520 seconds time elapsed
> > 
> > Please note that fabric counters support both fab_* and fab_port_*, but
> > actually they are sharing one set of performance counters in hardware.
> > If user wants to monitor overall data events on fab_* then fab_port_*
> > can't be supported at the same time, see example below:
> > 
> > perf stat -e fme0/fab_mmio_read/,fme0/fab_port_mmio_write,portid=0/
> > 
> >  Performance counter stats for 'system wide':
> > 
> >                  0      fme0/fab_mmio_read/
> >    <not supported>      fme0/fab_port_mmio_write,portid=0/
> > 
> >        2.141064085 seconds time elapsed
> > 
> > Signed-off-by: Luwei Kang <luwei.kang@intel.com>
> > Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> > Signed-off-by: Wu Hao <hao.wu@intel.com>
> > ---
> > v3: replace scnprintf with sprintf in sysfs interfaces.
> >     update sysfs doc kernel version and date.
> >     fix sysfs doc issue for fabric counter.
> >     refine PERF_OBJ_ATTR_* macro, doesn't count on __ATTR anymore.
> >     introduce PERF_OBJ_ATTR_F_* macro, as it needs to use different
> >     filenames for some of the sysfs attributes.
> >     remove kobject_del when destroy kobject, kobject_put is enough.
> >     do sysfs_remove_groups first when destroying perf_obj.
> >     WARN_ON_ONCE in case internal parms are wrong in read_*_count().
> > v4: rework this patch to use standard perf API as user interfaces.
> > ---
> >  drivers/fpga/Makefile       |   1 +
> >  drivers/fpga/dfl-fme-main.c |   4 +
> >  drivers/fpga/dfl-fme-perf.c | 871 ++++++++++++++++++++++++++++++++++++++++++++
> >  drivers/fpga/dfl-fme.h      |   2 +
> >  4 files changed, 878 insertions(+)
> >  create mode 100644 drivers/fpga/dfl-fme-perf.c
> > 
> > diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> > index 4865b74..d8e21df 100644
> > --- a/drivers/fpga/Makefile
> > +++ b/drivers/fpga/Makefile
> > @@ -40,6 +40,7 @@ obj-$(CONFIG_FPGA_DFL_FME_REGION)	+= dfl-fme-region.o
> >  obj-$(CONFIG_FPGA_DFL_AFU)		+= dfl-afu.o
> >  
> >  dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o dfl-fme-error.o
> > +dfl-fme-objs += dfl-fme-perf.o
> >  dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
> >  dfl-afu-objs += dfl-afu-error.o
> >  
> > diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> > index 9225b68..a11c112 100644
> > --- a/drivers/fpga/dfl-fme-main.c
> > +++ b/drivers/fpga/dfl-fme-main.c
> > @@ -639,6 +639,10 @@ static void fme_power_mgmt_uinit(struct platform_device *pdev,
> >  		.ops = &fme_power_mgmt_ops,
> >  	},
> >  	{
> > +		.id_table = fme_perf_id_table,
> > +		.ops = &fme_perf_ops,
> > +	},
> > +	{
> >  		.ops = NULL,
> >  	},
> >  };
> > diff --git a/drivers/fpga/dfl-fme-perf.c b/drivers/fpga/dfl-fme-perf.c
> > new file mode 100644
> > index 0000000..0d7768a
> > --- /dev/null
> > +++ b/drivers/fpga/dfl-fme-perf.c
> > @@ -0,0 +1,871 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Driver for FPGA Management Engine (FME) Global Performance Reporting
> > + *
> > + * Copyright 2019 Intel Corporation, Inc.
> > + *
> > + * Authors:
> > + *   Kang Luwei <luwei.kang@intel.com>
> > + *   Xiao Guangrong <guangrong.xiao@linux.intel.com>
> > + *   Wu Hao <hao.wu@intel.com>
> > + *   Xu Yilun <yilun.xu@intel.com>
> > + *   Joseph Grecco <joe.grecco@intel.com>
> > + *   Enno Luebbers <enno.luebbers@intel.com>
> > + *   Tim Whisonant <tim.whisonant@intel.com>
> > + *   Ananda Ravuri <ananda.ravuri@intel.com>
> > + *   Mitchel, Henry <henry.mitchel@intel.com>
> > + */
> > +
> > +#include <linux/perf_event.h>
> > +#include "dfl.h"
> > +#include "dfl-fme.h"
> > +
> > +/*
> > + * Performance Counter Registers for Cache.
> > + *
> > + * Cache Events are listed below as CACHE_EVNT_*.
> > + */
> > +#define CACHE_CTRL			0x8
> > +#define CACHE_RESET_CNTR		BIT_ULL(0)
> > +#define CACHE_FREEZE_CNTR		BIT_ULL(8)
> > +#define CACHE_CTRL_EVNT			GENMASK_ULL(19, 16)
> > +#define CACHE_EVNT_RD_HIT		0x0
> > +#define CACHE_EVNT_WR_HIT		0x1
> > +#define CACHE_EVNT_RD_MISS		0x2
> > +#define CACHE_EVNT_WR_MISS		0x3
> > +#define CACHE_EVNT_RSVD			0x4
> > +#define CACHE_EVNT_HOLD_REQ		0x5
> > +#define CACHE_EVNT_DATA_WR_PORT_CONTEN	0x6
> > +#define CACHE_EVNT_TAG_WR_PORT_CONTEN	0x7
> > +#define CACHE_EVNT_TX_REQ_STALL		0x8
> > +#define CACHE_EVNT_RX_REQ_STALL		0x9
> > +#define CACHE_EVNT_EVICTIONS		0xa
> > +#define CACHE_CHANNEL_SEL		BIT_ULL(20)
> > +#define CACHE_CHANNEL_RD		0
> > +#define CACHE_CHANNEL_WR		1
> > +#define CACHE_CNTR0			0x10
> > +#define CACHE_CNTR1			0x18
> > +#define CACHE_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
> > +#define CACHE_CNTR_EVNT			GENMASK_ULL(63, 60)
> > +
> > +/*
> > + * Performance Counter Registers for Fabric.
> > + *
> > + * Fabric Events are listed below as FAB_EVNT_*
> > + */
> > +#define FAB_CTRL			0x20
> > +#define FAB_RESET_CNTR			BIT_ULL(0)
> > +#define FAB_FREEZE_CNTR			BIT_ULL(8)
> > +#define FAB_CTRL_EVNT			GENMASK_ULL(19, 16)
> > +#define FAB_EVNT_PCIE0_RD		0x0
> > +#define FAB_EVNT_PCIE0_WR		0x1
> > +#define FAB_EVNT_PCIE1_RD		0x2
> > +#define FAB_EVNT_PCIE1_WR		0x3
> > +#define FAB_EVNT_UPI_RD			0x4
> > +#define FAB_EVNT_UPI_WR			0x5
> > +#define FAB_EVNT_MMIO_RD		0x6
> > +#define FAB_EVNT_MMIO_WR		0x7
> > +#define FAB_PORT_ID			GENMASK_ULL(21, 20)
> > +#define FAB_PORT_FILTER			BIT_ULL(23)
> > +#define FAB_PORT_FILTER_DISABLE		0
> > +#define FAB_PORT_FILTER_ENABLE		1
> > +#define FAB_CNTR			0x28
> > +#define FAB_CNTR_EVNT_CNTR		GENMASK_ULL(59, 0)
> > +#define FAB_CNTR_EVNT			GENMASK_ULL(63, 60)
> > +
> > +/*
> > + * Performance Counter Registers for Clock.
> > + *
> > + * Clock Counter can't be reset or frozen by SW.
> > + */
> > +#define CLK_CNTR			0x30
> > +#define BASIC_EVNT_CLK			0x0
> > +
> > +/*
> > + * Performance Counter Registers for IOMMU / VT-D.
> > + *
> > + * VT-D Events are listed below as VTD_EVNT_* and VTD_SIP_EVNT_*
> > + */
> > +#define VTD_CTRL			0x38
> > +#define VTD_RESET_CNTR			BIT_ULL(0)
> > +#define VTD_FREEZE_CNTR			BIT_ULL(8)
> > +#define VTD_CTRL_EVNT			GENMASK_ULL(19, 16)
> > +#define VTD_EVNT_AFU_MEM_RD_TRANS	0x0
> > +#define VTD_EVNT_AFU_MEM_WR_TRANS	0x1
> > +#define VTD_EVNT_AFU_DEVTLB_RD_HIT	0x2
> > +#define VTD_EVNT_AFU_DEVTLB_WR_HIT	0x3
> > +#define VTD_EVNT_DEVTLB_4K_FILL		0x4
> > +#define VTD_EVNT_DEVTLB_2M_FILL		0x5
> > +#define VTD_EVNT_DEVTLB_1G_FILL		0x6
> > +#define VTD_CNTR			0x40
> > +#define VTD_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
> > +#define VTD_CNTR_EVNT			GENMASK_ULL(63, 60)
> > +
> > +#define VTD_SIP_CTRL			0x48
> > +#define VTD_SIP_RESET_CNTR		BIT_ULL(0)
> > +#define VTD_SIP_FREEZE_CNTR		BIT_ULL(8)
> > +#define VTD_SIP_CTRL_EVNT		GENMASK_ULL(19, 16)
> > +#define VTD_SIP_EVNT_IOTLB_4K_HIT	0x0
> > +#define VTD_SIP_EVNT_IOTLB_2M_HIT	0x1
> > +#define VTD_SIP_EVNT_IOTLB_1G_HIT	0x2
> > +#define VTD_SIP_EVNT_SLPWC_L3_HIT	0x3
> > +#define VTD_SIP_EVNT_SLPWC_L4_HIT	0x4
> > +#define VTD_SIP_EVNT_RCC_HIT		0x5
> > +#define VTD_SIP_EVNT_IOTLB_4K_MISS	0x6
> > +#define VTD_SIP_EVNT_IOTLB_2M_MISS	0x7
> > +#define VTD_SIP_EVNT_IOTLB_1G_MISS	0x8
> > +#define VTD_SIP_EVNT_SLPWC_L3_MISS	0x9
> > +#define VTD_SIP_EVNT_SLPWC_L4_MISS	0xa
> > +#define VTD_SIP_EVNT_RCC_MISS		0xb
> > +#define VTD_SIP_CNTR			0X50
> > +#define VTD_SIP_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
> > +#define VTD_SIP_CNTR_EVNT		GENMASK_ULL(63, 60)
> > +
> > +#define PERF_TIMEOUT			30
> > +
> > +#define PERF_MAX_PORT_NUM		1
> > +
> > +/**
> > + * struct fme_perf_priv - priv data structure for fme perf driver
> > + *
> > + * @dev: parent device.
> > + * @ioaddr: mapped base address of mmio region.
> > + * @pmu: pmu data structure for fme perf counters.
> > + * @id: id of this fme performance report private feature.
> > + * @fab_users: current user number on fabric counters.
> > + * @fab_port_id: used to indicate current working mode of fabric counters.
> > + * @fab_lock: lock to protect fabric counters working mode.
> > + * @events_group: events attribute group for fme perf pmu.
> > + * @attr_groups: attribute groups for fme perf pmu.
> > + */
> > +struct fme_perf_priv {
> > +	struct device *dev;
> > +	void __iomem *ioaddr;
> > +	struct pmu pmu;
> > +	u64 id;
> > +
> > +	u32 fab_users;
> > +	u32 fab_port_id;
> > +	spinlock_t fab_lock;
> > +
> > +	struct attribute_group events_group;
> > +	const struct attribute_group *attr_groups[4];
> > +};
> > +
> > +/**
> > + * struct fme_perf_event_attr - fme perf event attribute
> > + *
> > + * @attr: device attribute of fme perf event.
> > + * @event_id: id of fme perf event.
> > + * @event_type: type of fme perf event.
> > + * @is_port_event: indicate if this is a port based event.
> > + * @data: private data for fme perf event.
> > + */
> > +struct fme_perf_event_attr {
> > +	struct device_attribute attr;
> > +	u32 event_id;
> > +	u32 event_type;
> > +	bool is_port_event;
> > +	u64 data;
> > +};
> > +
> > +/**
> > + * struct fme_perf_event_ops - callbacks for fme perf events
> > + *
> > + * @event_init: callback invoked during event init.
> > + * @event_destroy: callback invoked during event destroy.
> > + * @read_counter: callback to read hardware counters.
> > + */
> > +struct fme_perf_event_ops {
> > +	int (*event_init)(struct fme_perf_priv *priv, u32 event,
> > +			  u32 port_id, u64 data);
> > +	void (*event_destroy)(struct fme_perf_priv *priv, u32 event,
> > +			      u32 port_id, u64 data);
> > +	u64 (*read_counter)(struct fme_perf_priv *priv, u32 event,
> > +			    u32 port_id, u64 data);
> > +};
> > +
> > +/**
> > + * struct fme_perf_event_group - fme perf groups
> > + *
> > + * @ev_attrs: fme perf event attributes.
> > + * @num: events number in this group.
> > + * @ops: same callbacks shared by all fme perf events in this group.
> > + */
> > +struct fme_perf_event_group {
> > +	struct fme_perf_event_attr *ev_attrs;
> > +	unsigned int num;
> > +	struct fme_perf_event_ops *ops;
> > +};
> > +
> > +#define to_fme_perf_priv(_pmu)	container_of(_pmu, struct fme_perf_priv, pmu)
> > +
> > +static cpumask_t fme_perf_cpumask = CPU_MASK_CPU0;
> > +
> > +static ssize_t cpumask_show(struct device *dev,
> > +			    struct device_attribute *attr, char *buf)
> > +{
> > +	return cpumap_print_to_pagebuf(true, buf, &fme_perf_cpumask);
> > +}
> > +static DEVICE_ATTR_RO(cpumask);
> > +
> > +static struct attribute *fme_perf_cpumask_attrs[] = {
> > +	&dev_attr_cpumask.attr,
> > +	NULL,
> > +};
> > +
> > +static struct attribute_group fme_perf_cpumask_group = {
> > +	.attrs = fme_perf_cpumask_attrs,
> > +};
> > +
> > +#define FME_EVENT_MASK		GENMASK_ULL(11, 0)
> > +#define FME_EVTYPE_MASK		GENMASK_ULL(15, 12)
> > +#define FME_EVTYPE_BASIC	0
> > +#define FME_EVTYPE_CACHE	1
> > +#define FME_EVTYPE_FABRIC	2
> > +#define FME_EVTYPE_VTD		3
> > +#define FME_EVTYPE_VTD_SIP	4
> > +#define FME_EVTYPE_MAX		FME_EVTYPE_VTD_SIP
> > +#define FME_PORTID_MASK		GENMASK_ULL(23, 16)
> > +#define FME_PORTID_ROOT		(0xffU)
> > +
> > +PMU_FORMAT_ATTR(event,		"config:0-11");
> > +PMU_FORMAT_ATTR(evtype,		"config:12-15");
> > +PMU_FORMAT_ATTR(portid,		"config:16-23");
> > +
> > +static struct attribute *fme_perf_format_attrs[] = {
> > +	&format_attr_event.attr,
> > +	&format_attr_evtype.attr,
> > +	&format_attr_portid.attr,
> > +	NULL,
> > +};
> > +
> > +static struct attribute_group fme_perf_format_group = {
> > +	.name = "format",
> > +	.attrs = fme_perf_format_attrs,
> > +};
> 
> No Documentation/ABI/ entries for these sysfs files?

Hi Greg,

Thanks for the review.

I think those sysfs groups are all common ones to pmu, actually group
"events" and "format" are covered by these two ABI docs

Documentation/ABI/testing/sysfs-bus-event_source-devices-events
Documentation/ABI/testing/sysfs-bus-event_source-devices-format

For cpumask, i believe it's a common sysfs interface too, almost everybody
uses it (e.g. drivers/perf/*, and also perf tool). So we didn't introduce
a new ABI doc for these common ones.

As you see in this patchset, we add some descriptions in fpga/dfl.txt
doc file, it's following the same way as other Documentation/perf/*, as
we think it would help, and may be easier for FPGA user to find it.


Thanks
Hao

> 
> thanks,
> 
> greg k-h

Patch
diff mbox series

diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 4865b74..d8e21df 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -40,6 +40,7 @@  obj-$(CONFIG_FPGA_DFL_FME_REGION)	+= dfl-fme-region.o
 obj-$(CONFIG_FPGA_DFL_AFU)		+= dfl-afu.o
 
 dfl-fme-objs := dfl-fme-main.o dfl-fme-pr.o dfl-fme-error.o
+dfl-fme-objs += dfl-fme-perf.o
 dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
 dfl-afu-objs += dfl-afu-error.o
 
diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
index 9225b68..a11c112 100644
--- a/drivers/fpga/dfl-fme-main.c
+++ b/drivers/fpga/dfl-fme-main.c
@@ -639,6 +639,10 @@  static void fme_power_mgmt_uinit(struct platform_device *pdev,
 		.ops = &fme_power_mgmt_ops,
 	},
 	{
+		.id_table = fme_perf_id_table,
+		.ops = &fme_perf_ops,
+	},
+	{
 		.ops = NULL,
 	},
 };
diff --git a/drivers/fpga/dfl-fme-perf.c b/drivers/fpga/dfl-fme-perf.c
new file mode 100644
index 0000000..0d7768a
--- /dev/null
+++ b/drivers/fpga/dfl-fme-perf.c
@@ -0,0 +1,871 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for FPGA Management Engine (FME) Global Performance Reporting
+ *
+ * Copyright 2019 Intel Corporation, Inc.
+ *
+ * Authors:
+ *   Kang Luwei <luwei.kang@intel.com>
+ *   Xiao Guangrong <guangrong.xiao@linux.intel.com>
+ *   Wu Hao <hao.wu@intel.com>
+ *   Xu Yilun <yilun.xu@intel.com>
+ *   Joseph Grecco <joe.grecco@intel.com>
+ *   Enno Luebbers <enno.luebbers@intel.com>
+ *   Tim Whisonant <tim.whisonant@intel.com>
+ *   Ananda Ravuri <ananda.ravuri@intel.com>
+ *   Mitchel, Henry <henry.mitchel@intel.com>
+ */
+
+#include <linux/perf_event.h>
+#include "dfl.h"
+#include "dfl-fme.h"
+
+/*
+ * Performance Counter Registers for Cache.
+ *
+ * Cache Events are listed below as CACHE_EVNT_*.
+ */
+#define CACHE_CTRL			0x8
+#define CACHE_RESET_CNTR		BIT_ULL(0)
+#define CACHE_FREEZE_CNTR		BIT_ULL(8)
+#define CACHE_CTRL_EVNT			GENMASK_ULL(19, 16)
+#define CACHE_EVNT_RD_HIT		0x0
+#define CACHE_EVNT_WR_HIT		0x1
+#define CACHE_EVNT_RD_MISS		0x2
+#define CACHE_EVNT_WR_MISS		0x3
+#define CACHE_EVNT_RSVD			0x4
+#define CACHE_EVNT_HOLD_REQ		0x5
+#define CACHE_EVNT_DATA_WR_PORT_CONTEN	0x6
+#define CACHE_EVNT_TAG_WR_PORT_CONTEN	0x7
+#define CACHE_EVNT_TX_REQ_STALL		0x8
+#define CACHE_EVNT_RX_REQ_STALL		0x9
+#define CACHE_EVNT_EVICTIONS		0xa
+#define CACHE_CHANNEL_SEL		BIT_ULL(20)
+#define CACHE_CHANNEL_RD		0
+#define CACHE_CHANNEL_WR		1
+#define CACHE_CNTR0			0x10
+#define CACHE_CNTR1			0x18
+#define CACHE_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
+#define CACHE_CNTR_EVNT			GENMASK_ULL(63, 60)
+
+/*
+ * Performance Counter Registers for Fabric.
+ *
+ * Fabric Events are listed below as FAB_EVNT_*
+ */
+#define FAB_CTRL			0x20
+#define FAB_RESET_CNTR			BIT_ULL(0)
+#define FAB_FREEZE_CNTR			BIT_ULL(8)
+#define FAB_CTRL_EVNT			GENMASK_ULL(19, 16)
+#define FAB_EVNT_PCIE0_RD		0x0
+#define FAB_EVNT_PCIE0_WR		0x1
+#define FAB_EVNT_PCIE1_RD		0x2
+#define FAB_EVNT_PCIE1_WR		0x3
+#define FAB_EVNT_UPI_RD			0x4
+#define FAB_EVNT_UPI_WR			0x5
+#define FAB_EVNT_MMIO_RD		0x6
+#define FAB_EVNT_MMIO_WR		0x7
+#define FAB_PORT_ID			GENMASK_ULL(21, 20)
+#define FAB_PORT_FILTER			BIT_ULL(23)
+#define FAB_PORT_FILTER_DISABLE		0
+#define FAB_PORT_FILTER_ENABLE		1
+#define FAB_CNTR			0x28
+#define FAB_CNTR_EVNT_CNTR		GENMASK_ULL(59, 0)
+#define FAB_CNTR_EVNT			GENMASK_ULL(63, 60)
+
+/*
+ * Performance Counter Registers for Clock.
+ *
+ * Clock Counter can't be reset or frozen by SW.
+ */
+#define CLK_CNTR			0x30
+#define BASIC_EVNT_CLK			0x0
+
+/*
+ * Performance Counter Registers for IOMMU / VT-D.
+ *
+ * VT-D Events are listed below as VTD_EVNT_* and VTD_SIP_EVNT_*
+ */
+#define VTD_CTRL			0x38
+#define VTD_RESET_CNTR			BIT_ULL(0)
+#define VTD_FREEZE_CNTR			BIT_ULL(8)
+#define VTD_CTRL_EVNT			GENMASK_ULL(19, 16)
+#define VTD_EVNT_AFU_MEM_RD_TRANS	0x0
+#define VTD_EVNT_AFU_MEM_WR_TRANS	0x1
+#define VTD_EVNT_AFU_DEVTLB_RD_HIT	0x2
+#define VTD_EVNT_AFU_DEVTLB_WR_HIT	0x3
+#define VTD_EVNT_DEVTLB_4K_FILL		0x4
+#define VTD_EVNT_DEVTLB_2M_FILL		0x5
+#define VTD_EVNT_DEVTLB_1G_FILL		0x6
+#define VTD_CNTR			0x40
+#define VTD_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
+#define VTD_CNTR_EVNT			GENMASK_ULL(63, 60)
+
+#define VTD_SIP_CTRL			0x48
+#define VTD_SIP_RESET_CNTR		BIT_ULL(0)
+#define VTD_SIP_FREEZE_CNTR		BIT_ULL(8)
+#define VTD_SIP_CTRL_EVNT		GENMASK_ULL(19, 16)
+#define VTD_SIP_EVNT_IOTLB_4K_HIT	0x0
+#define VTD_SIP_EVNT_IOTLB_2M_HIT	0x1
+#define VTD_SIP_EVNT_IOTLB_1G_HIT	0x2
+#define VTD_SIP_EVNT_SLPWC_L3_HIT	0x3
+#define VTD_SIP_EVNT_SLPWC_L4_HIT	0x4
+#define VTD_SIP_EVNT_RCC_HIT		0x5
+#define VTD_SIP_EVNT_IOTLB_4K_MISS	0x6
+#define VTD_SIP_EVNT_IOTLB_2M_MISS	0x7
+#define VTD_SIP_EVNT_IOTLB_1G_MISS	0x8
+#define VTD_SIP_EVNT_SLPWC_L3_MISS	0x9
+#define VTD_SIP_EVNT_SLPWC_L4_MISS	0xa
+#define VTD_SIP_EVNT_RCC_MISS		0xb
+#define VTD_SIP_CNTR			0X50
+#define VTD_SIP_CNTR_EVNT_CNTR		GENMASK_ULL(47, 0)
+#define VTD_SIP_CNTR_EVNT		GENMASK_ULL(63, 60)
+
+#define PERF_TIMEOUT			30
+
+#define PERF_MAX_PORT_NUM		1
+
+/**
+ * struct fme_perf_priv - priv data structure for fme perf driver
+ *
+ * @dev: parent device.
+ * @ioaddr: mapped base address of mmio region.
+ * @pmu: pmu data structure for fme perf counters.
+ * @id: id of this fme performance report private feature.
+ * @fab_users: current user number on fabric counters.
+ * @fab_port_id: used to indicate current working mode of fabric counters.
+ * @fab_lock: lock to protect fabric counters working mode.
+ * @events_group: events attribute group for fme perf pmu.
+ * @attr_groups: attribute groups for fme perf pmu.
+ */
+struct fme_perf_priv {
+	struct device *dev;
+	void __iomem *ioaddr;
+	struct pmu pmu;
+	u64 id;
+
+	u32 fab_users;
+	u32 fab_port_id;
+	spinlock_t fab_lock;
+
+	struct attribute_group events_group;
+	const struct attribute_group *attr_groups[4];
+};
+
+/**
+ * struct fme_perf_event_attr - fme perf event attribute
+ *
+ * @attr: device attribute of fme perf event.
+ * @event_id: id of fme perf event.
+ * @event_type: type of fme perf event.
+ * @is_port_event: indicate if this is a port based event.
+ * @data: private data for fme perf event.
+ */
+struct fme_perf_event_attr {
+	struct device_attribute attr;
+	u32 event_id;
+	u32 event_type;
+	bool is_port_event;
+	u64 data;
+};
+
+/**
+ * struct fme_perf_event_ops - callbacks for fme perf events
+ *
+ * @event_init: callback invoked during event init.
+ * @event_destroy: callback invoked during event destroy.
+ * @read_counter: callback to read hardware counters.
+ */
+struct fme_perf_event_ops {
+	int (*event_init)(struct fme_perf_priv *priv, u32 event,
+			  u32 port_id, u64 data);
+	void (*event_destroy)(struct fme_perf_priv *priv, u32 event,
+			      u32 port_id, u64 data);
+	u64 (*read_counter)(struct fme_perf_priv *priv, u32 event,
+			    u32 port_id, u64 data);
+};
+
+/**
+ * struct fme_perf_event_group - fme perf groups
+ *
+ * @ev_attrs: fme perf event attributes.
+ * @num: events number in this group.
+ * @ops: same callbacks shared by all fme perf events in this group.
+ */
+struct fme_perf_event_group {
+	struct fme_perf_event_attr *ev_attrs;
+	unsigned int num;
+	struct fme_perf_event_ops *ops;
+};
+
+#define to_fme_perf_priv(_pmu)	container_of(_pmu, struct fme_perf_priv, pmu)
+
+static cpumask_t fme_perf_cpumask = CPU_MASK_CPU0;
+
+static ssize_t cpumask_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	return cpumap_print_to_pagebuf(true, buf, &fme_perf_cpumask);
+}
+static DEVICE_ATTR_RO(cpumask);
+
+static struct attribute *fme_perf_cpumask_attrs[] = {
+	&dev_attr_cpumask.attr,
+	NULL,
+};
+
+static struct attribute_group fme_perf_cpumask_group = {
+	.attrs = fme_perf_cpumask_attrs,
+};
+
+#define FME_EVENT_MASK		GENMASK_ULL(11, 0)
+#define FME_EVTYPE_MASK		GENMASK_ULL(15, 12)
+#define FME_EVTYPE_BASIC	0
+#define FME_EVTYPE_CACHE	1
+#define FME_EVTYPE_FABRIC	2
+#define FME_EVTYPE_VTD		3
+#define FME_EVTYPE_VTD_SIP	4
+#define FME_EVTYPE_MAX		FME_EVTYPE_VTD_SIP
+#define FME_PORTID_MASK		GENMASK_ULL(23, 16)
+#define FME_PORTID_ROOT		(0xffU)
+
+PMU_FORMAT_ATTR(event,		"config:0-11");
+PMU_FORMAT_ATTR(evtype,		"config:12-15");
+PMU_FORMAT_ATTR(portid,		"config:16-23");
+
+static struct attribute *fme_perf_format_attrs[] = {
+	&format_attr_event.attr,
+	&format_attr_evtype.attr,
+	&format_attr_portid.attr,
+	NULL,
+};
+
+static struct attribute_group fme_perf_format_group = {
+	.name = "format",
+	.attrs = fme_perf_format_attrs,
+};
+
+static ssize_t fme_perf_event_sysfs_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *page)
+{
+	struct fme_perf_event_attr *ev_attr =
+		container_of(attr, struct fme_perf_event_attr, attr);
+	char *buf = page;
+
+	buf += sprintf(buf, "event=0x%02x", ev_attr->event_id);
+	buf += sprintf(buf, ",evtype=0x%02x", ev_attr->event_type);
+
+	if (ev_attr->is_port_event)
+		buf += sprintf(buf, ",portid=?\n");
+	else
+		buf += sprintf(buf, ",portid=0x%02x\n", FME_PORTID_ROOT);
+
+	return (ssize_t)(buf - page);
+}
+
+#define FME_EVENT_ATTR(_name) \
+	__ATTR(_name, 0444, fme_perf_event_sysfs_show, NULL)
+
+#define FME_EVENT_BASIC(_name, _event) {		\
+	.attr = FME_EVENT_ATTR(_name),			\
+	.event_id = _event,				\
+	.event_type = FME_EVTYPE_BASIC,			\
+	.is_port_event = false,				\
+}
+
+/* data is used to save hardware channel information for cache events */
+#define FME_EVENT_CACHE(_name, _event, _data) {		\
+	.attr = FME_EVENT_ATTR(cache_##_name),		\
+	.event_id = _event,				\
+	.event_type = FME_EVTYPE_CACHE,			\
+	.is_port_event = false,				\
+	.data = _data,					\
+}
+
+#define FME_EVENT_FABRIC(_name, _event) {		\
+	.attr = FME_EVENT_ATTR(fab_##_name),		\
+	.event_id = _event,				\
+	.event_type = FME_EVTYPE_FABRIC,		\
+	.is_port_event = false,				\
+}
+
+#define FME_EVENT_FABRIC_PORT(_name, _event) {		\
+	.attr = FME_EVENT_ATTR(fab_port_##_name),	\
+	.event_id = _event,				\
+	.event_type = FME_EVTYPE_FABRIC,		\
+	.is_port_event = true,				\
+}
+
+#define FME_EVENT_VTD_PORT(_name, _event) {		\
+	.attr = FME_EVENT_ATTR(vtd_port_##_name),	\
+	.event_id = _event,				\
+	.event_type = FME_EVTYPE_VTD,			\
+	.is_port_event = true,				\
+}
+
+#define FME_EVENT_VTD_SIP(_name, _event) {		\
+	.attr = FME_EVENT_ATTR(vtd_sip_##_name),	\
+	.event_id = _event,				\
+	.event_type = FME_EVTYPE_VTD_SIP,		\
+	.is_port_event = false,				\
+}
+
+static struct fme_perf_event_attr fme_perf_basic_events[] = {
+	FME_EVENT_BASIC(clock, BASIC_EVNT_CLK),
+};
+
+static struct fme_perf_event_attr fme_perf_cache_events[] = {
+	FME_EVENT_CACHE(read_hit,     CACHE_EVNT_RD_HIT,    CACHE_CHANNEL_RD),
+	FME_EVENT_CACHE(read_miss,    CACHE_EVNT_RD_MISS,   CACHE_CHANNEL_RD),
+	FME_EVENT_CACHE(write_hit,    CACHE_EVNT_WR_HIT,    CACHE_CHANNEL_WR),
+	FME_EVENT_CACHE(write_miss,   CACHE_EVNT_WR_MISS,   CACHE_CHANNEL_WR),
+	FME_EVENT_CACHE(hold_request, CACHE_EVNT_HOLD_REQ,  CACHE_CHANNEL_RD),
+	FME_EVENT_CACHE(data_write_port_contention,
+			CACHE_EVNT_DATA_WR_PORT_CONTEN, CACHE_CHANNEL_WR),
+	FME_EVENT_CACHE(tag_write_port_contention,
+			CACHE_EVNT_TAG_WR_PORT_CONTEN,  CACHE_CHANNEL_WR),
+	FME_EVENT_CACHE(tx_req_stall, CACHE_EVNT_TX_REQ_STALL,
+			CACHE_CHANNEL_RD),
+	FME_EVENT_CACHE(rx_req_stall, CACHE_EVNT_RX_REQ_STALL,
+			CACHE_CHANNEL_RD),
+	FME_EVENT_CACHE(eviction,  CACHE_EVNT_EVICTIONS, CACHE_CHANNEL_RD),
+};
+
+static struct fme_perf_event_attr fme_perf_fab_events[] = {
+	FME_EVENT_FABRIC(pcie0_read,  FAB_EVNT_PCIE0_RD),
+	FME_EVENT_FABRIC(pcie0_write, FAB_EVNT_PCIE0_WR),
+	FME_EVENT_FABRIC(pcie1_read,  FAB_EVNT_PCIE1_RD),
+	FME_EVENT_FABRIC(pcie1_write, FAB_EVNT_PCIE1_WR),
+	FME_EVENT_FABRIC(upi_read,    FAB_EVNT_UPI_RD),
+	FME_EVENT_FABRIC(upi_write,   FAB_EVNT_UPI_WR),
+	FME_EVENT_FABRIC(mmio_read,   FAB_EVNT_MMIO_RD),
+	FME_EVENT_FABRIC(mmio_write,  FAB_EVNT_MMIO_WR),
+
+	FME_EVENT_FABRIC_PORT(pcie0_read,  FAB_EVNT_PCIE0_RD),
+	FME_EVENT_FABRIC_PORT(pcie0_write, FAB_EVNT_PCIE0_WR),
+	FME_EVENT_FABRIC_PORT(pcie1_read,  FAB_EVNT_PCIE1_RD),
+	FME_EVENT_FABRIC_PORT(pcie1_write, FAB_EVNT_PCIE1_WR),
+	FME_EVENT_FABRIC_PORT(upi_read,    FAB_EVNT_UPI_RD),
+	FME_EVENT_FABRIC_PORT(upi_write,   FAB_EVNT_UPI_WR),
+	FME_EVENT_FABRIC_PORT(mmio_read,   FAB_EVNT_MMIO_RD),
+	FME_EVENT_FABRIC_PORT(mmio_write,  FAB_EVNT_MMIO_WR),
+};
+
+static struct fme_perf_event_attr fme_perf_vtd_events[] = {
+	FME_EVENT_VTD_PORT(read_transaction,  VTD_EVNT_AFU_MEM_RD_TRANS),
+	FME_EVENT_VTD_PORT(write_transaction, VTD_EVNT_AFU_MEM_WR_TRANS),
+	FME_EVENT_VTD_PORT(devtlb_read_hit,   VTD_EVNT_AFU_DEVTLB_RD_HIT),
+	FME_EVENT_VTD_PORT(devtlb_write_hit,  VTD_EVNT_AFU_DEVTLB_WR_HIT),
+	FME_EVENT_VTD_PORT(devtlb_4k_fill,    VTD_EVNT_DEVTLB_4K_FILL),
+	FME_EVENT_VTD_PORT(devtlb_2m_fill,    VTD_EVNT_DEVTLB_2M_FILL),
+	FME_EVENT_VTD_PORT(devtlb_1g_fill,    VTD_EVNT_DEVTLB_1G_FILL),
+};
+
+static struct fme_perf_event_attr fme_perf_vtd_sip_events[] = {
+	FME_EVENT_VTD_SIP(iotlb_4k_hit,  VTD_SIP_EVNT_IOTLB_4K_HIT),
+	FME_EVENT_VTD_SIP(iotlb_2m_hit,  VTD_SIP_EVNT_IOTLB_2M_HIT),
+	FME_EVENT_VTD_SIP(iotlb_1g_hit,  VTD_SIP_EVNT_IOTLB_1G_HIT),
+	FME_EVENT_VTD_SIP(slpwc_l3_hit,  VTD_SIP_EVNT_SLPWC_L3_HIT),
+	FME_EVENT_VTD_SIP(slpwc_l4_hit,  VTD_SIP_EVNT_SLPWC_L4_HIT),
+	FME_EVENT_VTD_SIP(rcc_hit,       VTD_SIP_EVNT_RCC_HIT),
+	FME_EVENT_VTD_SIP(iotlb_4k_miss, VTD_SIP_EVNT_IOTLB_4K_MISS),
+	FME_EVENT_VTD_SIP(iotlb_2m_miss, VTD_SIP_EVNT_IOTLB_2M_MISS),
+	FME_EVENT_VTD_SIP(iotlb_1g_miss, VTD_SIP_EVNT_IOTLB_1G_MISS),
+	FME_EVENT_VTD_SIP(slpwc_l3_miss, VTD_SIP_EVNT_SLPWC_L3_MISS),
+	FME_EVENT_VTD_SIP(slpwc_l4_miss, VTD_SIP_EVNT_SLPWC_L4_MISS),
+	FME_EVENT_VTD_SIP(rcc_miss,      VTD_SIP_EVNT_RCC_MISS),
+};
+
+static u64 basic_read_event_counter(struct fme_perf_priv *priv,
+				    u32 event, u32 port_id, u64 data)
+{
+	void __iomem *base = priv->ioaddr;
+
+	if (event == BASIC_EVNT_CLK)
+		return readq(base + CLK_CNTR);
+
+	return 0;
+}
+
+static struct fme_perf_event_ops fme_perf_basic_ops = {
+	.read_counter = basic_read_event_counter,
+};
+
+static u64 cache_read_event_counter(struct fme_perf_priv *priv,
+				    u32 event, u32 port_id, u64 data)
+{
+	void __iomem *base = priv->ioaddr;
+	u8 channel = (u8)data;
+	u64 v, count;
+
+	/* set channel access type and cache event code. */
+	v = readq(base + CACHE_CTRL);
+	v &= ~(CACHE_CHANNEL_SEL | CACHE_CTRL_EVNT);
+	v |= FIELD_PREP(CACHE_CHANNEL_SEL, channel);
+	v |= FIELD_PREP(CACHE_CTRL_EVNT, event);
+	writeq(v, base + CACHE_CTRL);
+
+	if (readq_poll_timeout_atomic(base + CACHE_CNTR0, v,
+				      FIELD_GET(CACHE_CNTR_EVNT, v) == event,
+				      1, PERF_TIMEOUT)) {
+		dev_err(priv->dev, "timeout, unmatched cache event code in counter register.\n");
+		return 0;
+	}
+
+	v = readq(base + CACHE_CNTR0);
+	count = FIELD_GET(CACHE_CNTR_EVNT_CNTR, v);
+	v = readq(base + CACHE_CNTR1);
+	count += FIELD_GET(CACHE_CNTR_EVNT_CNTR, v);
+
+	return count;
+}
+
+static struct fme_perf_event_ops fme_perf_cache_ops = {
+	.read_counter = cache_read_event_counter,
+};
+
+static int fabric_event_init(struct fme_perf_priv *priv,
+			     u32 event, u32 port_id, u64 data)
+{
+	void __iomem *base = priv->ioaddr;
+	int ret = 0;
+	u64 v;
+
+	/*
+	 * as fabric counter set only can be in either overall or port mode.
+	 * In overall mode, it counts overall data for FPGA, and in port mode,
+	 * it is configured to monitor on one individual port.
+	 *
+	 * so every time, a new event is initialized, driver checks
+	 * current working mode and if someone is using this counter set.
+	 */
+	spin_lock(&priv->fab_lock);
+	if (priv->fab_users && priv->fab_port_id != port_id) {
+		dev_dbg(priv->dev, "conflict fabric event monitoring mode.\n");
+		ret = -EOPNOTSUPP;
+		goto exit;
+	}
+
+	priv->fab_users++;
+
+	/*
+	 * skip if current working mode matches, otherwise change the working
+	 * mode per input port_id, to monitor overall data or another port.
+	 */
+	if (priv->fab_port_id == port_id)
+		goto exit;
+
+	priv->fab_port_id = port_id;
+
+	v = readq(base + FAB_CTRL);
+	v &= ~(FAB_PORT_FILTER | FAB_PORT_ID);
+
+	if (port_id == FME_PORTID_ROOT) {
+		v |= FIELD_PREP(FAB_PORT_FILTER, FAB_PORT_FILTER_DISABLE);
+	} else {
+		v |= FIELD_PREP(FAB_PORT_FILTER, FAB_PORT_FILTER_ENABLE);
+		v |= FIELD_PREP(FAB_PORT_ID, port_id);
+	}
+	writeq(v, base + FAB_CTRL);
+
+exit:
+	spin_unlock(&priv->fab_lock);
+	return ret;
+}
+
+static void fabric_event_destroy(struct fme_perf_priv *priv,
+				 u32 event, u32 port_id, u64 data)
+{
+	spin_lock(&priv->fab_lock);
+	priv->fab_users--;
+	spin_unlock(&priv->fab_lock);
+}
+
+static u64 fabric_read_event_counter(struct fme_perf_priv *priv,
+				     u32 event, u32 port_id, u64 data)
+{
+	void __iomem *base = priv->ioaddr;
+	u64 v;
+
+	v = readq(base + FAB_CTRL);
+	v &= ~FAB_CTRL_EVNT;
+	v |= FIELD_PREP(FAB_CTRL_EVNT, event);
+	writeq(v, base + FAB_CTRL);
+
+	if (readq_poll_timeout_atomic(base + FAB_CNTR, v,
+				      FIELD_GET(FAB_CNTR_EVNT, v) == event,
+				      1, PERF_TIMEOUT)) {
+		dev_err(priv->dev, "timeout, unmatched fab event code in counter register.\n");
+		return 0;
+	}
+
+	v = readq(base + FAB_CNTR);
+	return FIELD_GET(FAB_CNTR_EVNT_CNTR, v);
+}
+
+static struct fme_perf_event_ops fme_perf_fab_ops = {
+	.event_init = fabric_event_init,
+	.event_destroy = fabric_event_destroy,
+	.read_counter = fabric_read_event_counter,
+};
+
+static u64 vtd_read_event_counter(struct fme_perf_priv *priv,
+				  u32 event, u32 port_id, u64 data)
+{
+	void __iomem *base = priv->ioaddr;
+	u64 v;
+
+	event += port_id;
+
+	v = readq(base + VTD_CTRL);
+	v &= ~VTD_CTRL_EVNT;
+	v |= FIELD_PREP(VTD_CTRL_EVNT, event);
+	writeq(v, base + VTD_CTRL);
+
+	if (readq_poll_timeout_atomic(base + VTD_CNTR, v,
+				      FIELD_GET(VTD_CNTR_EVNT, v) == event,
+				      1, PERF_TIMEOUT)) {
+		dev_err(priv->dev, "timeout, unmatched vtd event code in counter register.\n");
+		return 0;
+	}
+
+	v = readq(base + VTD_CNTR);
+	return FIELD_GET(VTD_CNTR_EVNT_CNTR, v);
+}
+
+static struct fme_perf_event_ops fme_perf_vtd_ops = {
+	.read_counter = vtd_read_event_counter,
+};
+
+static u64 vtd_sip_read_event_counter(struct fme_perf_priv *priv,
+				      u32 event, u32 port_id, u64 data)
+{
+	void __iomem *base = priv->ioaddr;
+	u64 v;
+
+	v = readq(base + VTD_SIP_CTRL);
+	v &= ~VTD_SIP_CTRL_EVNT;
+	v |= FIELD_PREP(VTD_SIP_CTRL_EVNT, event);
+	writeq(v, base + VTD_SIP_CTRL);
+
+	if (readq_poll_timeout_atomic(base + VTD_SIP_CNTR, v,
+				      FIELD_GET(VTD_SIP_CNTR_EVNT, v) == event,
+				      1, PERF_TIMEOUT)) {
+		dev_err(priv->dev, "timeout, unmatched vtd sip event code in counter register\n");
+		return 0;
+	}
+
+	v = readq(base + VTD_SIP_CNTR);
+	return FIELD_GET(VTD_SIP_CNTR_EVNT_CNTR, v);
+}
+
+static struct fme_perf_event_ops fme_perf_vtd_sip_ops = {
+	.read_counter = vtd_sip_read_event_counter,
+};
+
+#define FME_EVENT_GROUP(_name) {			\
+	.ev_attrs = fme_perf_##_name##_events,		\
+	.num = ARRAY_SIZE(fme_perf_##_name##_events),	\
+	.ops = &fme_perf_##_name##_ops,			\
+}
+
+/* event group array is indexed by FME_EVTYPE_* */
+static struct fme_perf_event_group fme_perf_event_groups[] = {
+	FME_EVENT_GROUP(basic),
+	FME_EVENT_GROUP(cache),
+	FME_EVENT_GROUP(fab),
+	FME_EVENT_GROUP(vtd),
+	FME_EVENT_GROUP(vtd_sip),
+};
+
+static struct fme_perf_event_attr *
+get_event_attr(u32 event_id, u32 event_type, u32 port_id)
+{
+	bool is_port_event = (port_id != FME_PORTID_ROOT);
+	struct fme_perf_event_group *group;
+	unsigned int i;
+
+	if (event_type > FME_EVTYPE_MAX)
+		return NULL;
+
+	group = &fme_perf_event_groups[event_type];
+
+	for (i = 0; i < group->num; i++) {
+		if (event_id == group->ev_attrs[i].event_id &&
+		    is_port_event == group->ev_attrs[i].is_port_event)
+			return &group->ev_attrs[i];
+	}
+
+	return NULL;
+}
+
+static struct fme_perf_event_ops *get_event_ops(u32 event_type)
+{
+	return fme_perf_event_groups[event_type].ops;
+}
+
+static void fme_perf_event_destroy(struct perf_event *event)
+{
+	struct fme_perf_event_ops *ops = get_event_ops(event->hw.event_base);
+	struct fme_perf_priv *priv = to_fme_perf_priv(event->pmu);
+
+	if (ops->event_destroy)
+		ops->event_destroy(priv, event->hw.idx,
+				   event->hw.config_base, event->hw.config);
+}
+
+static int fme_perf_event_init(struct perf_event *event)
+{
+	struct fme_perf_priv *priv = to_fme_perf_priv(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	struct fme_perf_event_attr *ev_attr;
+	u32 event_id, event_type, port_id;
+	struct fme_perf_event_ops *ops;
+
+	/* test the event attr type check for PMU enumeration */
+	if (event->attr.type != event->pmu->type)
+		return -ENOENT;
+
+	/*
+	 * fme counters are shared across all cores.
+	 * Therefore, it does not support per-process mode.
+	 * Also, it does not support event sampling mode.
+	 */
+	if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
+		return -EINVAL;
+
+	if (event->cpu < 0)
+		return -EINVAL;
+
+	event_id = FIELD_GET(FME_EVENT_MASK, event->attr.config);
+	event_type = FIELD_GET(FME_EVTYPE_MASK, event->attr.config);
+	port_id = FIELD_GET(FME_PORTID_MASK, event->attr.config);
+
+	ev_attr = get_event_attr(event_id, event_type, port_id);
+	if (!ev_attr)
+		return -EINVAL;
+
+	if ((ev_attr->is_port_event && port_id >= PERF_MAX_PORT_NUM) ||
+	    (!ev_attr->is_port_event && port_id != FME_PORTID_ROOT))
+		return -EINVAL;
+
+	hwc->event_base = event_type;
+	hwc->idx = (int)event_id;
+	hwc->config_base = port_id;
+	hwc->config = ev_attr->data;
+
+	event->destroy = fme_perf_event_destroy;
+
+	dev_dbg(priv->dev,
+		"%s eventid=0x%x, evtype=0x%x, portid=0x%x, data=0x%llx\n",
+		__func__, event_id, event_type, port_id, ev_attr->data);
+
+	ops = get_event_ops(event->hw.event_base);
+
+	if (ops->event_init)
+		return ops->event_init(priv, hwc->idx,
+				       hwc->config_base, hwc->config);
+
+	return 0;
+}
+
+static void fme_perf_event_update(struct perf_event *event)
+{
+	struct fme_perf_event_ops *ops = get_event_ops(event->hw.event_base);
+	struct fme_perf_priv *priv = to_fme_perf_priv(event->pmu);
+	u64 now, prev, delta;
+
+	now = ops->read_counter(priv, (u32)event->hw.idx,
+				event->hw.config_base, event->hw.config);
+	prev = local64_read(&event->hw.prev_count);
+	delta = now - prev;
+
+	local64_add(delta, &event->count);
+}
+
+static void fme_perf_event_start(struct perf_event *event, int flags)
+{
+	struct fme_perf_event_ops *ops = get_event_ops(event->hw.event_base);
+	struct fme_perf_priv *priv = to_fme_perf_priv(event->pmu);
+	u64 count;
+
+	count = ops->read_counter(priv, (u32)event->hw.idx,
+				  event->hw.config_base, event->hw.config);
+	local64_set(&event->hw.prev_count, count);
+}
+
+static void fme_perf_event_stop(struct perf_event *event, int flags)
+{
+	fme_perf_event_update(event);
+}
+
+static int fme_perf_event_add(struct perf_event *event, int flags)
+{
+	if (flags & PERF_EF_START)
+		fme_perf_event_start(event, flags);
+
+	return 0;
+}
+
+static void fme_perf_event_del(struct perf_event *event, int flags)
+{
+	fme_perf_event_stop(event, PERF_EF_UPDATE);
+}
+
+static void fme_perf_event_read(struct perf_event *event)
+{
+	fme_perf_event_update(event);
+}
+
+static int fme_perf_setup_attrs(struct fme_perf_priv *priv)
+{
+	struct fme_perf_event_group *group;
+	unsigned int i, idx = 0, num = 0;
+	struct attribute **attrs;
+
+	/*
+	 * if feature id is FME_FEATURE_ID_GLOBAL_IPERF, hardware supports
+	 * all performance counters, otherwise only basic and fabric counters.
+	 */
+	num += fme_perf_event_groups[FME_EVTYPE_BASIC].num;
+	num += fme_perf_event_groups[FME_EVTYPE_FABRIC].num;
+
+	if (priv->id == FME_FEATURE_ID_GLOBAL_IPERF) {
+		num += fme_perf_event_groups[FME_EVTYPE_CACHE].num;
+		num += fme_perf_event_groups[FME_EVTYPE_VTD].num;
+		num += fme_perf_event_groups[FME_EVTYPE_VTD_SIP].num;
+	}
+
+	attrs = devm_kcalloc(priv->dev, num + 1, sizeof(*attrs), GFP_KERNEL);
+	if (!attrs)
+		return -ENOMEM;
+
+	group = &fme_perf_event_groups[FME_EVTYPE_BASIC];
+	for (i = 0; i < group->num; i++)
+		attrs[idx++] = &group->ev_attrs[i].attr.attr;
+
+	group = &fme_perf_event_groups[FME_EVTYPE_FABRIC];
+	for (i = 0; i < group->num; i++)
+		attrs[idx++] = &group->ev_attrs[i].attr.attr;
+
+	if (priv->id == FME_FEATURE_ID_GLOBAL_IPERF) {
+		group = &fme_perf_event_groups[FME_EVTYPE_CACHE];
+		for (i = 0; i < group->num; i++)
+			attrs[idx++] = &group->ev_attrs[i].attr.attr;
+
+		group = &fme_perf_event_groups[FME_EVTYPE_VTD];
+		for (i = 0; i < group->num; i++)
+			attrs[idx++] = &group->ev_attrs[i].attr.attr;
+
+		group = &fme_perf_event_groups[FME_EVTYPE_VTD_SIP];
+		for (i = 0; i < group->num; i++)
+			attrs[idx++] = &group->ev_attrs[i].attr.attr;
+	}
+
+	priv->events_group.name = "events";
+	priv->events_group.attrs = attrs;
+
+	priv->attr_groups[0] = &fme_perf_format_group;
+	priv->attr_groups[1] = &fme_perf_cpumask_group;
+	priv->attr_groups[2] = &priv->events_group;
+
+	return 0;
+}
+
+static void fme_perf_setup_hardware(struct fme_perf_priv *priv)
+{
+	void __iomem *base = priv->ioaddr;
+	u64 v;
+
+	/* read and save current working mode for fabric counters */
+	v = readq(base + FAB_CTRL);
+
+	if (FIELD_GET(FAB_PORT_FILTER, v) == FAB_PORT_FILTER_DISABLE)
+		priv->fab_port_id = FME_PORTID_ROOT;
+	else
+		priv->fab_port_id = FIELD_GET(FAB_PORT_ID, v);
+}
+
+static int fme_perf_pmu_register(struct platform_device *pdev,
+				 struct fme_perf_priv *priv)
+{
+	struct pmu *pmu = &priv->pmu;
+	char *name;
+	int ret;
+
+	spin_lock_init(&priv->fab_lock);
+
+	ret = fme_perf_setup_attrs(priv);
+	if (ret)
+		return ret;
+
+	fme_perf_setup_hardware(priv);
+
+	pmu->task_ctx_nr =	perf_invalid_context;
+	pmu->attr_groups =	priv->attr_groups;
+	pmu->event_init =	fme_perf_event_init;
+	pmu->add =		fme_perf_event_add;
+	pmu->del =		fme_perf_event_del;
+	pmu->start =		fme_perf_event_start;
+	pmu->stop =		fme_perf_event_stop;
+	pmu->read =		fme_perf_event_read;
+	pmu->capabilities =	PERF_PMU_CAP_NO_INTERRUPT |
+				PERF_PMU_CAP_NO_EXCLUDE;
+
+	name = devm_kasprintf(priv->dev, GFP_KERNEL, "fme%d", pdev->id);
+
+	ret = perf_pmu_register(pmu, name, -1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void fme_perf_pmu_unregister(struct fme_perf_priv *priv)
+{
+	perf_pmu_unregister(&priv->pmu);
+}
+
+static int fme_perf_init(struct platform_device *pdev,
+			 struct dfl_feature *feature)
+{
+	struct fme_perf_priv *priv;
+	int ret;
+
+	dev_dbg(&pdev->dev, "FME Perf Init\n");
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+	priv->ioaddr = feature->ioaddr;
+	priv->id = feature->id;
+
+	ret = fme_perf_pmu_register(pdev, priv);
+	if (ret)
+		return ret;
+
+	feature->priv = priv;
+	return 0;
+}
+
+static void fme_perf_uinit(struct platform_device *pdev,
+			   struct dfl_feature *feature)
+{
+	struct fme_perf_priv *priv = feature->priv;
+
+	fme_perf_pmu_unregister(priv);
+}
+
+const struct dfl_feature_id fme_perf_id_table[] = {
+	{.id = FME_FEATURE_ID_GLOBAL_IPERF,},
+	{.id = FME_FEATURE_ID_GLOBAL_DPERF,},
+	{0,}
+};
+
+const struct dfl_feature_ops fme_perf_ops = {
+	.init = fme_perf_init,
+	.uinit = fme_perf_uinit,
+};
diff --git a/drivers/fpga/dfl-fme.h b/drivers/fpga/dfl-fme.h
index 5fbe3f5..dc71048 100644
--- a/drivers/fpga/dfl-fme.h
+++ b/drivers/fpga/dfl-fme.h
@@ -39,5 +39,7 @@  struct dfl_fme {
 extern const struct dfl_feature_id fme_pr_mgmt_id_table[];
 extern const struct dfl_feature_ops fme_global_err_ops;
 extern const struct dfl_feature_id fme_global_err_id_table[];
+extern const struct dfl_feature_ops fme_perf_ops;
+extern const struct dfl_feature_id fme_perf_id_table[];
 
 #endif /* __DFL_FME_H */