[v2] generic: test cloning large exents to a file with many small extents
diff mbox series

Message ID 20190628220836.16096-1-fdmanana@kernel.org
State New
Headers show
Series
  • [v2] generic: test cloning large exents to a file with many small extents
Related show

Commit Message

Filipe Manana June 28, 2019, 10:08 p.m. UTC
From: Filipe Manana <fdmanana@suse.com>

Test that if we clone a file with some large extents into a file that has
many small extents, when the fs is nearly full, the clone operation does
not fail and produces the correct result.

This is motivated by a bug found in btrfs wich is fixed by the following
patches for the linux kernel:

 [PATCH 1/2] Btrfs: factor out extent dropping code from hole punch handler
 [PATCH 2/2] Btrfs: fix ENOSPC errors, leading to transaction aborts, when
             cloning extents

The test currently passes on xfs.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
---

V2: Use _scratch_cycle_mount instead of _scratch_remount, as we want to see
    if the operation was durably persisted (otherwise we are seeing content
    from the page cache).
    Use _reflink instead of calling xfs_io with the reflink command.
    Make the comment before filling the filesystem more clear about why it
    is done the way it is instead of using _fill_fs.

 tests/generic/558     | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/558.out |  5 ++++
 tests/generic/group   |  1 +
 3 files changed, 86 insertions(+)
 create mode 100755 tests/generic/558
 create mode 100644 tests/generic/558.out

Comments

Eryu Guan July 5, 2019, 7:43 a.m. UTC | #1
On Fri, Jun 28, 2019 at 11:08:36PM +0100, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> Test that if we clone a file with some large extents into a file that has
> many small extents, when the fs is nearly full, the clone operation does
> not fail and produces the correct result.
> 
> This is motivated by a bug found in btrfs wich is fixed by the following
> patches for the linux kernel:
> 
>  [PATCH 1/2] Btrfs: factor out extent dropping code from hole punch handler
>  [PATCH 2/2] Btrfs: fix ENOSPC errors, leading to transaction aborts, when
>              cloning extents
> 
> The test currently passes on xfs.
> 
> Signed-off-by: Filipe Manana <fdmanana@suse.com>
> ---
> 
> V2: Use _scratch_cycle_mount instead of _scratch_remount, as we want to see
>     if the operation was durably persisted (otherwise we are seeing content
>     from the page cache).
>     Use _reflink instead of calling xfs_io with the reflink command.
>     Make the comment before filling the filesystem more clear about why it
>     is done the way it is instead of using _fill_fs.
> 
>  tests/generic/558     | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/generic/558.out |  5 ++++
>  tests/generic/group   |  1 +
>  3 files changed, 86 insertions(+)
>  create mode 100755 tests/generic/558
>  create mode 100644 tests/generic/558.out
> 
> diff --git a/tests/generic/558 b/tests/generic/558
> new file mode 100755
> index 00000000..f982930d
> --- /dev/null
> +++ b/tests/generic/558
> @@ -0,0 +1,80 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (C) 2019 SUSE Linux Products GmbH. All Rights Reserved.
> +#
> +# FSQA Test No. 558
> +#
> +# Test that if we clone a file with some large extents into a file that has
> +# many small extents, when the fs is nearly full, the clone operation does
> +# not fail and produces the correct result.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/reflink
> +
> +# real QA test starts here
> +_supported_fs generic
> +_supported_os Linux
> +_require_scratch_reflink
> +
> +rm -f $seqres.full
> +
> +_scratch_mkfs_sized $((512 * 1024 * 1024)) >>$seqres.full 2>&1
> +_scratch_mount
> +
> +file_size=$(( 128 * 1024 * 1024 )) # 128Mb
> +extent_size=4096
> +num_extents=$(( $file_size / $extent_size ))
> +
> +# Create a file with many small extents.
> +for ((i = 0; i < $num_extents; i++)); do
> +	offset=$(( $i * $extent_size ))
> +	$XFS_IO_PROG -f -s -c "pwrite -S 0xe5 $offset $extent_size" \
> +		$SCRATCH_MNT/foo >>/dev/null
> +done

This is taking too long time (1000+s) to finish when testing on XFS. I'm
wondering if we could take use of src/punch-alternating to punch out
every other block to create a file with many small extents.

i.e. with the following diffs, test runs & passes with XFS within 90s
while still reproduces the btrfs bug (note that I have to increase the
file_size to 200M to reproduce the btrfs bug, while 256M seems bring
test time back to 1000+s). Would you please check if this works for you?

Thanks,
Eryu


diff --git a/tests/generic/558 b/tests/generic/558
index f982930d65a2..40f8a7a98d3f 100755
--- a/tests/generic/558
+++ b/tests/generic/558
@@ -30,22 +30,22 @@ _cleanup()
 _supported_fs generic
 _supported_os Linux
 _require_scratch_reflink
+_require_test_program "punch-alternating"
+_require_xfs_io_command "fpunch"

 rm -f $seqres.full

 _scratch_mkfs_sized $((512 * 1024 * 1024)) >>$seqres.full 2>&1
 _scratch_mount

-file_size=$(( 128 * 1024 * 1024 )) # 128Mb
+file_size=$(( 200 * 1024 * 1024 )) # 200MB
 extent_size=4096
 num_extents=$(( $file_size / $extent_size ))

 # Create a file with many small extents.
-for ((i = 0; i < $num_extents; i++)); do
-       offset=$(( $i * $extent_size ))
-       $XFS_IO_PROG -f -s -c "pwrite -S 0xe5 $offset $extent_size" \
-               $SCRATCH_MNT/foo >>/dev/null
-done
+$XFS_IO_PROG -f -c "pwrite -S 0xe5 -b $file_size 0 $file_size" \
+       $SCRATCH_MNT/foo >>/dev/null
+$here/src/punch-alternating $SCRATCH_MNT/foo >> $seqres.full

 # Create file bar with the same size that file foo has but with large extents.
 $XFS_IO_PROG -f -c "pwrite -S 0xc7 -b $file_size 0 $file_size" \
diff --git a/tests/generic/558.out b/tests/generic/558.out
index d1e8e70f5b79..00cb5a9744aa 100644
--- a/tests/generic/558.out
+++ b/tests/generic/558.out
@@ -2,4 +2,4 @@ QA output created by 558
 File foo data after cloning and remount:
 0000000 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7
 *
-134217728
+209715200

> +
> +# Create file bar with the same size that file foo has but with large extents.
> +$XFS_IO_PROG -f -c "pwrite -S 0xc7 -b $file_size 0 $file_size" \
> +	$SCRATCH_MNT/bar >>/dev/null
> +
> +# Fill the fs (For btrfs we are interested in filling all unallocated space
> +# and most of the existing metadata block group(s), so that after this there
> +# will be no unallocated space and metadata space will be mostly full but with
> +# more than enough free space for the clone operation below to succeed, we
> +# create files with 2Kb because that results in extents inlined in the metadata
> +# (btree leafs) and it's the fastest way to fill metadata space on btrfs, by
> +# default btrfs inlines up to 2Kb of data).
> +i=1
> +while true; do
> +	$XFS_IO_PROG -f -c "pwrite 0 2K" $SCRATCH_MNT/filler_$i &> /dev/null
> +	[ $? -ne 0 ] && break
> +	i=$(( i + 1 ))
> +done
> +
> +# Now clone file bar into file foo. This is supposed to succeed and not fail
> +# with ENOSPC for example.
> +_reflink $SCRATCH_MNT/bar $SCRATCH_MNT/foo >>$seqres.full
> +
> +# Unmount and mount the filesystem again to verify the operation was durably
> +# persisted.
> +_scratch_cycle_mount
> +
> +echo "File foo data after cloning and remount:"
> +od -A d -t x1 $SCRATCH_MNT/foo
> +
> +status=0
> +exit
> diff --git a/tests/generic/558.out b/tests/generic/558.out
> new file mode 100644
> index 00000000..d1e8e70f
> --- /dev/null
> +++ b/tests/generic/558.out
> @@ -0,0 +1,5 @@
> +QA output created by 558
> +File foo data after cloning and remount:
> +0000000 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7
> +*
> +134217728
> diff --git a/tests/generic/group b/tests/generic/group
> index 543c0627..c06c1cd1 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -560,3 +560,4 @@
>  555 auto quick cap
>  556 auto quick casefold
>  557 auto quick log
> +558 auto clone
> -- 
> 2.11.0
>
Filipe Manana July 5, 2019, 10:09 a.m. UTC | #2
On Fri, Jul 5, 2019 at 8:43 AM Eryu Guan <guaneryu@gmail.com> wrote:
>
> On Fri, Jun 28, 2019 at 11:08:36PM +0100, fdmanana@kernel.org wrote:
> > From: Filipe Manana <fdmanana@suse.com>
> >
> > Test that if we clone a file with some large extents into a file that has
> > many small extents, when the fs is nearly full, the clone operation does
> > not fail and produces the correct result.
> >
> > This is motivated by a bug found in btrfs wich is fixed by the following
> > patches for the linux kernel:
> >
> >  [PATCH 1/2] Btrfs: factor out extent dropping code from hole punch handler
> >  [PATCH 2/2] Btrfs: fix ENOSPC errors, leading to transaction aborts, when
> >              cloning extents
> >
> > The test currently passes on xfs.
> >
> > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > ---
> >
> > V2: Use _scratch_cycle_mount instead of _scratch_remount, as we want to see
> >     if the operation was durably persisted (otherwise we are seeing content
> >     from the page cache).
> >     Use _reflink instead of calling xfs_io with the reflink command.
> >     Make the comment before filling the filesystem more clear about why it
> >     is done the way it is instead of using _fill_fs.
> >
> >  tests/generic/558     | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++
> >  tests/generic/558.out |  5 ++++
> >  tests/generic/group   |  1 +
> >  3 files changed, 86 insertions(+)
> >  create mode 100755 tests/generic/558
> >  create mode 100644 tests/generic/558.out
> >
> > diff --git a/tests/generic/558 b/tests/generic/558
> > new file mode 100755
> > index 00000000..f982930d
> > --- /dev/null
> > +++ b/tests/generic/558
> > @@ -0,0 +1,80 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (C) 2019 SUSE Linux Products GmbH. All Rights Reserved.
> > +#
> > +# FSQA Test No. 558
> > +#
> > +# Test that if we clone a file with some large extents into a file that has
> > +# many small extents, when the fs is nearly full, the clone operation does
> > +# not fail and produces the correct result.
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +tmp=/tmp/$$
> > +status=1     # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > +     cd /
> > +     rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +. ./common/reflink
> > +
> > +# real QA test starts here
> > +_supported_fs generic
> > +_supported_os Linux
> > +_require_scratch_reflink
> > +
> > +rm -f $seqres.full
> > +
> > +_scratch_mkfs_sized $((512 * 1024 * 1024)) >>$seqres.full 2>&1
> > +_scratch_mount
> > +
> > +file_size=$(( 128 * 1024 * 1024 )) # 128Mb
> > +extent_size=4096
> > +num_extents=$(( $file_size / $extent_size ))
> > +
> > +# Create a file with many small extents.
> > +for ((i = 0; i < $num_extents; i++)); do
> > +     offset=$(( $i * $extent_size ))
> > +     $XFS_IO_PROG -f -s -c "pwrite -S 0xe5 $offset $extent_size" \
> > +             $SCRATCH_MNT/foo >>/dev/null
> > +done
>
> This is taking too long time (1000+s) to finish when testing on XFS.

Hum, for on 5.2-rc, debug kernel (lockdep, plenty of other debug stuff
enabled that slows things down), it takes about 350 seconds for me.

> I'm
> wondering if we could take use of src/punch-alternating to punch out
> every other block to create a file with many small extents.

That's fine, I didn't remember about that.

>
> i.e. with the following diffs, test runs & passes with XFS within 90s
> while still reproduces the btrfs bug (note that I have to increase the
> file_size to 200M to reproduce the btrfs bug, while 256M seems bring
> test time back to 1000+s). Would you please check if this works for you?

It does, thanks!
And, because of the holes, it uncovered a bug in my fix (second patch).

Now it takes ~15 seconds on btrfs instead of ~300s and ~100s on xfs for me.

>
> Thanks,
> Eryu
>
>
> diff --git a/tests/generic/558 b/tests/generic/558
> index f982930d65a2..40f8a7a98d3f 100755
> --- a/tests/generic/558
> +++ b/tests/generic/558
> @@ -30,22 +30,22 @@ _cleanup()
>  _supported_fs generic
>  _supported_os Linux
>  _require_scratch_reflink
> +_require_test_program "punch-alternating"
> +_require_xfs_io_command "fpunch"
>
>  rm -f $seqres.full
>
>  _scratch_mkfs_sized $((512 * 1024 * 1024)) >>$seqres.full 2>&1
>  _scratch_mount
>
> -file_size=$(( 128 * 1024 * 1024 )) # 128Mb
> +file_size=$(( 200 * 1024 * 1024 )) # 200MB
>  extent_size=4096
>  num_extents=$(( $file_size / $extent_size ))

These two variables, extent_size and num_extents, are no longer needed.

Do you want me to send another version of the patch or can you apply
this patch on top of it?

Thanks.

>
>  # Create a file with many small extents.
> -for ((i = 0; i < $num_extents; i++)); do
> -       offset=$(( $i * $extent_size ))
> -       $XFS_IO_PROG -f -s -c "pwrite -S 0xe5 $offset $extent_size" \
> -               $SCRATCH_MNT/foo >>/dev/null
> -done
> +$XFS_IO_PROG -f -c "pwrite -S 0xe5 -b $file_size 0 $file_size" \
> +       $SCRATCH_MNT/foo >>/dev/null
> +$here/src/punch-alternating $SCRATCH_MNT/foo >> $seqres.full
>
>  # Create file bar with the same size that file foo has but with large extents.
>  $XFS_IO_PROG -f -c "pwrite -S 0xc7 -b $file_size 0 $file_size" \
> diff --git a/tests/generic/558.out b/tests/generic/558.out
> index d1e8e70f5b79..00cb5a9744aa 100644
> --- a/tests/generic/558.out
> +++ b/tests/generic/558.out
> @@ -2,4 +2,4 @@ QA output created by 558
>  File foo data after cloning and remount:
>  0000000 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7
>  *
> -134217728
> +209715200
>
> > +
> > +# Create file bar with the same size that file foo has but with large extents.
> > +$XFS_IO_PROG -f -c "pwrite -S 0xc7 -b $file_size 0 $file_size" \
> > +     $SCRATCH_MNT/bar >>/dev/null
> > +
> > +# Fill the fs (For btrfs we are interested in filling all unallocated space
> > +# and most of the existing metadata block group(s), so that after this there
> > +# will be no unallocated space and metadata space will be mostly full but with
> > +# more than enough free space for the clone operation below to succeed, we
> > +# create files with 2Kb because that results in extents inlined in the metadata
> > +# (btree leafs) and it's the fastest way to fill metadata space on btrfs, by
> > +# default btrfs inlines up to 2Kb of data).
> > +i=1
> > +while true; do
> > +     $XFS_IO_PROG -f -c "pwrite 0 2K" $SCRATCH_MNT/filler_$i &> /dev/null
> > +     [ $? -ne 0 ] && break
> > +     i=$(( i + 1 ))
> > +done
> > +
> > +# Now clone file bar into file foo. This is supposed to succeed and not fail
> > +# with ENOSPC for example.
> > +_reflink $SCRATCH_MNT/bar $SCRATCH_MNT/foo >>$seqres.full
> > +
> > +# Unmount and mount the filesystem again to verify the operation was durably
> > +# persisted.
> > +_scratch_cycle_mount
> > +
> > +echo "File foo data after cloning and remount:"
> > +od -A d -t x1 $SCRATCH_MNT/foo
> > +
> > +status=0
> > +exit
> > diff --git a/tests/generic/558.out b/tests/generic/558.out
> > new file mode 100644
> > index 00000000..d1e8e70f
> > --- /dev/null
> > +++ b/tests/generic/558.out
> > @@ -0,0 +1,5 @@
> > +QA output created by 558
> > +File foo data after cloning and remount:
> > +0000000 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7
> > +*
> > +134217728
> > diff --git a/tests/generic/group b/tests/generic/group
> > index 543c0627..c06c1cd1 100644
> > --- a/tests/generic/group
> > +++ b/tests/generic/group
> > @@ -560,3 +560,4 @@
> >  555 auto quick cap
> >  556 auto quick casefold
> >  557 auto quick log
> > +558 auto clone
> > --
> > 2.11.0
> >
Eryu Guan July 7, 2019, 12:41 p.m. UTC | #3
On Fri, Jul 05, 2019 at 11:09:38AM +0100, Filipe Manana wrote:
> On Fri, Jul 5, 2019 at 8:43 AM Eryu Guan <guaneryu@gmail.com> wrote:
> >
> > On Fri, Jun 28, 2019 at 11:08:36PM +0100, fdmanana@kernel.org wrote:
> > > From: Filipe Manana <fdmanana@suse.com>
> > >
> > > Test that if we clone a file with some large extents into a file that has
> > > many small extents, when the fs is nearly full, the clone operation does
> > > not fail and produces the correct result.
> > >
> > > This is motivated by a bug found in btrfs wich is fixed by the following
> > > patches for the linux kernel:
> > >
> > >  [PATCH 1/2] Btrfs: factor out extent dropping code from hole punch handler
> > >  [PATCH 2/2] Btrfs: fix ENOSPC errors, leading to transaction aborts, when
> > >              cloning extents
> > >
> > > The test currently passes on xfs.
> > >
> > > Signed-off-by: Filipe Manana <fdmanana@suse.com>
> > > ---
> > >
> > > V2: Use _scratch_cycle_mount instead of _scratch_remount, as we want to see
> > >     if the operation was durably persisted (otherwise we are seeing content
> > >     from the page cache).
> > >     Use _reflink instead of calling xfs_io with the reflink command.
> > >     Make the comment before filling the filesystem more clear about why it
> > >     is done the way it is instead of using _fill_fs.
> > >
> > >  tests/generic/558     | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > >  tests/generic/558.out |  5 ++++
> > >  tests/generic/group   |  1 +
> > >  3 files changed, 86 insertions(+)
> > >  create mode 100755 tests/generic/558
> > >  create mode 100644 tests/generic/558.out
> > >
> > > diff --git a/tests/generic/558 b/tests/generic/558
> > > new file mode 100755
> > > index 00000000..f982930d
> > > --- /dev/null
> > > +++ b/tests/generic/558
> > > @@ -0,0 +1,80 @@
> > > +#! /bin/bash
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +# Copyright (C) 2019 SUSE Linux Products GmbH. All Rights Reserved.
> > > +#
> > > +# FSQA Test No. 558
> > > +#
> > > +# Test that if we clone a file with some large extents into a file that has
> > > +# many small extents, when the fs is nearly full, the clone operation does
> > > +# not fail and produces the correct result.
> > > +#
> > > +seq=`basename $0`
> > > +seqres=$RESULT_DIR/$seq
> > > +echo "QA output created by $seq"
> > > +tmp=/tmp/$$
> > > +status=1     # failure is the default!
> > > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > > +
> > > +_cleanup()
> > > +{
> > > +     cd /
> > > +     rm -f $tmp.*
> > > +}
> > > +
> > > +# get standard environment, filters and checks
> > > +. ./common/rc
> > > +. ./common/filter
> > > +. ./common/reflink
> > > +
> > > +# real QA test starts here
> > > +_supported_fs generic
> > > +_supported_os Linux
> > > +_require_scratch_reflink
> > > +
> > > +rm -f $seqres.full
> > > +
> > > +_scratch_mkfs_sized $((512 * 1024 * 1024)) >>$seqres.full 2>&1
> > > +_scratch_mount
> > > +
> > > +file_size=$(( 128 * 1024 * 1024 )) # 128Mb
> > > +extent_size=4096
> > > +num_extents=$(( $file_size / $extent_size ))
> > > +
> > > +# Create a file with many small extents.
> > > +for ((i = 0; i < $num_extents; i++)); do
> > > +     offset=$(( $i * $extent_size ))
> > > +     $XFS_IO_PROG -f -s -c "pwrite -S 0xe5 $offset $extent_size" \
> > > +             $SCRATCH_MNT/foo >>/dev/null
> > > +done
> >
> > This is taking too long time (1000+s) to finish when testing on XFS.
> 
> Hum, for on 5.2-rc, debug kernel (lockdep, plenty of other debug stuff
> enabled that slows things down), it takes about 350 seconds for me.
> 
> > I'm
> > wondering if we could take use of src/punch-alternating to punch out
> > every other block to create a file with many small extents.
> 
> That's fine, I didn't remember about that.
> 
> >
> > i.e. with the following diffs, test runs & passes with XFS within 90s
> > while still reproduces the btrfs bug (note that I have to increase the
> > file_size to 200M to reproduce the btrfs bug, while 256M seems bring
> > test time back to 1000+s). Would you please check if this works for you?
> 
> It does, thanks!
> And, because of the holes, it uncovered a bug in my fix (second patch).

That's great :)

> 
> Now it takes ~15 seconds on btrfs instead of ~300s and ~100s on xfs for me.

Sounds good!

> 
> >
> > Thanks,
> > Eryu
> >
> >
> > diff --git a/tests/generic/558 b/tests/generic/558
> > index f982930d65a2..40f8a7a98d3f 100755
> > --- a/tests/generic/558
> > +++ b/tests/generic/558
> > @@ -30,22 +30,22 @@ _cleanup()
> >  _supported_fs generic
> >  _supported_os Linux
> >  _require_scratch_reflink
> > +_require_test_program "punch-alternating"
> > +_require_xfs_io_command "fpunch"
> >
> >  rm -f $seqres.full
> >
> >  _scratch_mkfs_sized $((512 * 1024 * 1024)) >>$seqres.full 2>&1
> >  _scratch_mount
> >
> > -file_size=$(( 128 * 1024 * 1024 )) # 128Mb
> > +file_size=$(( 200 * 1024 * 1024 )) # 200MB
> >  extent_size=4096
> >  num_extents=$(( $file_size / $extent_size ))
> 
> These two variables, extent_size and num_extents, are no longer needed.
> 
> Do you want me to send another version of the patch or can you apply
> this patch on top of it?

I can fix the patch on commit. Thanks for the confirmation!

Eryu

> 
> Thanks.
> 
> >
> >  # Create a file with many small extents.
> > -for ((i = 0; i < $num_extents; i++)); do
> > -       offset=$(( $i * $extent_size ))
> > -       $XFS_IO_PROG -f -s -c "pwrite -S 0xe5 $offset $extent_size" \
> > -               $SCRATCH_MNT/foo >>/dev/null
> > -done
> > +$XFS_IO_PROG -f -c "pwrite -S 0xe5 -b $file_size 0 $file_size" \
> > +       $SCRATCH_MNT/foo >>/dev/null
> > +$here/src/punch-alternating $SCRATCH_MNT/foo >> $seqres.full
> >
> >  # Create file bar with the same size that file foo has but with large extents.
> >  $XFS_IO_PROG -f -c "pwrite -S 0xc7 -b $file_size 0 $file_size" \
> > diff --git a/tests/generic/558.out b/tests/generic/558.out
> > index d1e8e70f5b79..00cb5a9744aa 100644
> > --- a/tests/generic/558.out
> > +++ b/tests/generic/558.out
> > @@ -2,4 +2,4 @@ QA output created by 558
> >  File foo data after cloning and remount:
> >  0000000 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7
> >  *
> > -134217728
> > +209715200
> >
> > > +
> > > +# Create file bar with the same size that file foo has but with large extents.
> > > +$XFS_IO_PROG -f -c "pwrite -S 0xc7 -b $file_size 0 $file_size" \
> > > +     $SCRATCH_MNT/bar >>/dev/null
> > > +
> > > +# Fill the fs (For btrfs we are interested in filling all unallocated space
> > > +# and most of the existing metadata block group(s), so that after this there
> > > +# will be no unallocated space and metadata space will be mostly full but with
> > > +# more than enough free space for the clone operation below to succeed, we
> > > +# create files with 2Kb because that results in extents inlined in the metadata
> > > +# (btree leafs) and it's the fastest way to fill metadata space on btrfs, by
> > > +# default btrfs inlines up to 2Kb of data).
> > > +i=1
> > > +while true; do
> > > +     $XFS_IO_PROG -f -c "pwrite 0 2K" $SCRATCH_MNT/filler_$i &> /dev/null
> > > +     [ $? -ne 0 ] && break
> > > +     i=$(( i + 1 ))
> > > +done
> > > +
> > > +# Now clone file bar into file foo. This is supposed to succeed and not fail
> > > +# with ENOSPC for example.
> > > +_reflink $SCRATCH_MNT/bar $SCRATCH_MNT/foo >>$seqres.full
> > > +
> > > +# Unmount and mount the filesystem again to verify the operation was durably
> > > +# persisted.
> > > +_scratch_cycle_mount
> > > +
> > > +echo "File foo data after cloning and remount:"
> > > +od -A d -t x1 $SCRATCH_MNT/foo
> > > +
> > > +status=0
> > > +exit
> > > diff --git a/tests/generic/558.out b/tests/generic/558.out
> > > new file mode 100644
> > > index 00000000..d1e8e70f
> > > --- /dev/null
> > > +++ b/tests/generic/558.out
> > > @@ -0,0 +1,5 @@
> > > +QA output created by 558
> > > +File foo data after cloning and remount:
> > > +0000000 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7
> > > +*
> > > +134217728
> > > diff --git a/tests/generic/group b/tests/generic/group
> > > index 543c0627..c06c1cd1 100644
> > > --- a/tests/generic/group
> > > +++ b/tests/generic/group
> > > @@ -560,3 +560,4 @@
> > >  555 auto quick cap
> > >  556 auto quick casefold
> > >  557 auto quick log
> > > +558 auto clone
> > > --
> > > 2.11.0
> > >

Patch
diff mbox series

diff --git a/tests/generic/558 b/tests/generic/558
new file mode 100755
index 00000000..f982930d
--- /dev/null
+++ b/tests/generic/558
@@ -0,0 +1,80 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2019 SUSE Linux Products GmbH. All Rights Reserved.
+#
+# FSQA Test No. 558
+#
+# Test that if we clone a file with some large extents into a file that has
+# many small extents, when the fs is nearly full, the clone operation does
+# not fail and produces the correct result.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_scratch_reflink
+
+rm -f $seqres.full
+
+_scratch_mkfs_sized $((512 * 1024 * 1024)) >>$seqres.full 2>&1
+_scratch_mount
+
+file_size=$(( 128 * 1024 * 1024 )) # 128Mb
+extent_size=4096
+num_extents=$(( $file_size / $extent_size ))
+
+# Create a file with many small extents.
+for ((i = 0; i < $num_extents; i++)); do
+	offset=$(( $i * $extent_size ))
+	$XFS_IO_PROG -f -s -c "pwrite -S 0xe5 $offset $extent_size" \
+		$SCRATCH_MNT/foo >>/dev/null
+done
+
+# Create file bar with the same size that file foo has but with large extents.
+$XFS_IO_PROG -f -c "pwrite -S 0xc7 -b $file_size 0 $file_size" \
+	$SCRATCH_MNT/bar >>/dev/null
+
+# Fill the fs (For btrfs we are interested in filling all unallocated space
+# and most of the existing metadata block group(s), so that after this there
+# will be no unallocated space and metadata space will be mostly full but with
+# more than enough free space for the clone operation below to succeed, we
+# create files with 2Kb because that results in extents inlined in the metadata
+# (btree leafs) and it's the fastest way to fill metadata space on btrfs, by
+# default btrfs inlines up to 2Kb of data).
+i=1
+while true; do
+	$XFS_IO_PROG -f -c "pwrite 0 2K" $SCRATCH_MNT/filler_$i &> /dev/null
+	[ $? -ne 0 ] && break
+	i=$(( i + 1 ))
+done
+
+# Now clone file bar into file foo. This is supposed to succeed and not fail
+# with ENOSPC for example.
+_reflink $SCRATCH_MNT/bar $SCRATCH_MNT/foo >>$seqres.full
+
+# Unmount and mount the filesystem again to verify the operation was durably
+# persisted.
+_scratch_cycle_mount
+
+echo "File foo data after cloning and remount:"
+od -A d -t x1 $SCRATCH_MNT/foo
+
+status=0
+exit
diff --git a/tests/generic/558.out b/tests/generic/558.out
new file mode 100644
index 00000000..d1e8e70f
--- /dev/null
+++ b/tests/generic/558.out
@@ -0,0 +1,5 @@ 
+QA output created by 558
+File foo data after cloning and remount:
+0000000 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7 c7
+*
+134217728
diff --git a/tests/generic/group b/tests/generic/group
index 543c0627..c06c1cd1 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -560,3 +560,4 @@ 
 555 auto quick cap
 556 auto quick casefold
 557 auto quick log
+558 auto clone