[v4,3/3] ath11k: register HE mesh capabilities

Commit Message

Sven Eckelmann July 3, 2019, 10:18 a.m. UTC

From: Sven Eckelmann <[e-mail]>

The capabilities for the HE mesh are generated from the capabilities
reported by the fw. But the firmware only reports the overall capabilities
and not the one which are specific for mesh. Some of them (TWT, MU UL/DL,
TB PPDU, ...) require an infrastructure setup with a main STA (AP)
controlling the operations. This is not the case for mesh and thus these
capabilities are removed from the list of capabilities.

Signed-off-by: Sven Eckelmann <[e-mail]>
---
 drivers/net/wireless/ath/ath11k/mac.c | 56 +++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

Patch

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index dd164b5bb51a..3a3296b83cc1 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3150,6 +3150,7 @@  static int ath11k_mac_copy_he_cap(struct ath11k *ar,
 		switch (i) {
 		case NL80211_IFTYPE_STATION:
 		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_MESH_POINT:
 			break;
 
 		default:
@@ -3190,6 +3191,61 @@  static int ath11k_mac_copy_he_cap(struct ath11k *ar,
 			he_cap_elem->phy_cap_info[9] |=
 				IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU;
 			break;
+		case NL80211_IFTYPE_MESH_POINT:
+			he_cap_elem->mac_cap_info[0] &=
+				~(IEEE80211_HE_MAC_CAP0_TWT_RES |
+				  IEEE80211_HE_MAC_CAP0_TWT_REQ);
+			he_cap_elem->mac_cap_info[2] &=
+				~(IEEE80211_HE_MAC_CAP2_TRS |
+				  IEEE80211_HE_MAC_CAP2_BCAST_TWT |
+				  IEEE80211_HE_MAC_CAP2_MU_CASCADING);
+			he_cap_elem->mac_cap_info[3] &=
+				~(IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED |
+				  IEEE80211_HE_MAC_CAP2_BCAST_TWT |
+				  IEEE80211_HE_MAC_CAP2_MU_CASCADING);
+			he_cap_elem->mac_cap_info[4] &=
+				~(IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG |
+				  IEEE80211_HE_MAC_CAP4_BQR);
+			he_cap_elem->mac_cap_info[5] &=
+				~(IEEE80211_HE_MAC_CAP5_SUBCHAN_SELECVITE_TRANSMISSION |
+				  IEEE80211_HE_MAC_CAP5_UL_2x996_TONE_RU |
+				  IEEE80211_HE_MAC_CAP5_PUNCTURED_SOUNDING |
+				  IEEE80211_HE_MAC_CAP5_HT_VHT_TRIG_FRAME_RX);
+
+			he_cap_elem->phy_cap_info[2] &=
+				~(IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+				  IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO);
+			he_cap_elem->phy_cap_info[3] &=
+				~(IEEE80211_HE_PHY_CAP3_RX_HE_MU_PPDU_FROM_NON_AP_STA |
+				  IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK |
+				  IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK);
+			he_cap_elem->phy_cap_info[4] &=
+				~IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER;
+			he_cap_elem->phy_cap_info[5] &=
+				~IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK;
+			he_cap_elem->phy_cap_info[6] &=
+				~(IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU |
+				  IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB |
+				  IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB |
+				  IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO);
+			he_cap_elem->phy_cap_info[7] &=
+				~(IEEE80211_HE_PHY_CAP7_SRP_BASED_SR |
+				  IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_AR |
+				  IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ |
+				  IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ);
+			he_cap_elem->phy_cap_info[8] &=
+				~(IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI |
+				  IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G |
+				  IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU |
+				  IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU);
+			he_cap_elem->phy_cap_info[9] &=
+				~(IEEE80211_HE_PHY_CAP9_LONGER_THAN_16_SIGB_OFDM_SYM |
+				  IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK |
+				  IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU |
+				  IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU |
+				  IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB |
+				  IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB);
+			break;
 		}
 
 		he_cap->he_mcs_nss_supp.rx_mcs_80 =