[PATCHv6,08/28] PCI: mobiveil: Move the link up waiting out of mobiveil_host_init()
diff mbox series

Message ID 20190705095656.19191-9-Zhiqiang.Hou@nxp.com
State New
Headers show
Series
  • PCI: mobiveil: fixes for Mobiveil PCIe Host Bridge IP driver
Related show

Commit Message

Z.q. Hou July 5, 2019, 9:56 a.m. UTC
The host initializing sequence does not depend on PCIe link up,
so move it to the plac just before the enumeration.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
---
V6:
 - Rebased the patch, no functional change.

 drivers/pci/controller/pcie-mobiveil.c |   15 +++++++--------
 1 files changed, 7 insertions(+), 8 deletions(-)

Patch
diff mbox series

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index 9e08061..8f92f05 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -561,15 +561,8 @@  static void mobiveil_pcie_enable_msi(struct mobiveil_pcie *pcie)
 static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 {
 	u32 value, pab_ctrl, type = 0;
-	int err;
 	struct resource_entry *win;
 
-	err = mobiveil_bringup_link(pcie);
-	if (err) {
-		dev_info(&pcie->pdev->dev, "link bring-up failed\n");
-		return err;
-	}
-
 	/*
 	 * program Bus Master Enable Bit in Command Register in PAB Config
 	 * Space
@@ -635,7 +628,7 @@  static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 	/* setup MSI hardware registers */
 	mobiveil_pcie_enable_msi(pcie);
 
-	return err;
+	return 0;
 }
 
 static void mobiveil_mask_intx_irq(struct irq_data *data)
@@ -892,6 +885,12 @@  static int mobiveil_pcie_probe(struct platform_device *pdev)
 	bridge->map_irq = of_irq_parse_and_map_pci;
 	bridge->swizzle_irq = pci_common_swizzle;
 
+	ret = mobiveil_bringup_link(pcie);
+	if (ret) {
+		dev_info(dev, "link bring-up failed\n");
+		goto error;
+	}
+
 	/* setup the kernel resources for the newly added PCIe root bus */
 	ret = pci_scan_root_bus_bridge(bridge);
 	if (ret)