[13/14] thermal: rcar_gen3_thermal: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
diff mbox series

Message ID 20190708123409.12219-1-huangfq.daxian@gmail.com
State New
Delegated to: Eduardo Valentin
Headers show
Series
  • Untitled series #143203
Related show

Commit Message

Fuqian Huang July 8, 2019, 12:34 p.m. UTC
devm_add_action_or_reset() is introduced as a helper function which 
internally calls devm_add_action(). If devm_add_action() fails 
then it will execute the action mentioned and return the error code.
This reduce source code size (avoid writing the action twice) 
and reduce the likelyhood of bugs.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
---
 drivers/thermal/rcar_gen3_thermal.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Patch
diff mbox series

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index a56463308694..755d2b5bd2c2 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -443,9 +443,8 @@  static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		if (ret)
 			goto error_unregister;
 
-		ret = devm_add_action(dev, rcar_gen3_hwmon_action, zone);
+		ret = devm_add_action_or_reset(dev, rcar_gen3_hwmon_action, zone);
 		if (ret) {
-			rcar_gen3_hwmon_action(zone);
 			goto error_unregister;
 		}