diff mbox series

[v3,2/6] coresight: etm4x: use explicit barriers on enable/disable

Message ID 20190711160114.634-3-andrew.murray@arm.com (mailing list archive)
State New, archived
Headers show
Series coresight: etm4x: save/restore ETMv4 context across CPU low power states | expand

Commit Message

Andrew Murray July 11, 2019, 4:01 p.m. UTC 
Synchronization is recommended before disabling the trace registers
to prevent any start or stop points being speculative at the point
of disabling the unit (section 7.3.77 of ARM IHI 0064D).

Synchronization is also recommended after programming the trace
registers to ensure all updates are committed prior to normal code
resuming (section 4.3.7 of ARM IHI 0064D).

Let's ensure these syncronization points are present in the code
and clearly commented.

Note that we could rely on the barriers in CS_LOCK and
coresight_disclaim_device_unlocked or the context switch to user
space - however coresight may be of use in the kernel.

On armv8 the mb macro is defined as dsb(sy) - Given that the etm4x is
only used on armv8 let's directly use dsb(sy) instead of mb(). This
removes some ambiguity and makes it easier to correlate the code with
the TRM.

Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
CC: stable@vger.kernel.org
---
 drivers/hwtracing/coresight/coresight-etm4x.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index c89190d464ab..3825a39e9a49 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -188,6 +188,13 @@  static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
 		dev_err(etm_dev,
 			"timeout while waiting for Idle Trace Status\n");
 
+	/*
+	 * As recommended by section 4.3.7 ("Synchronization when using the
+	 * memory-mapped interface") of ARM IHI 0064D
+	 */
+	dsb(sy);
+	isb();
+
 done:
 	CS_LOCK(drvdata->base);
 
@@ -453,8 +460,12 @@  static void etm4_disable_hw(void *info)
 	/* EN, bit[0] Trace unit enable bit */
 	control &= ~0x1;
 
-	/* make sure everything completes before disabling */
-	mb();
+	/*
+	 * Make sure everything completes before disabling, as recommended
+	 * by section 7.3.77 ("TRCVICTLR, ViewInst Main Control Register,
+	 * SSTATUS") of ARM IHI 0064D
+	 */
+	dsb(sy);
 	isb();
 	writel_relaxed(control, drvdata->base + TRCPRGCTLR);