[v3] mmc: host: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming
diff mbox series

Message ID 7ab490e5b311f6cb057c4663d69ef7cbe3318dae.1563266066.git.baolin.wang@linaro.org
State New
Headers show
Series
  • [v3] mmc: host: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming
Related show

Commit Message

Baolin Wang July 16, 2019, 8:39 a.m. UTC
In sdhci_runtime_resume_host() function, we will always do software reset
for all, which will cause Spreadtrum host controller work abnormally after
resuming.

Thus for Spreadtrum platform that do not power down the SD/eMMC card during
runtime suspend, we should not do software reset for all. To fix this
issue, adding a specific reset operation that add one condition to validate
the MMC_CAP_AGGRESSIVE_PM to decide if we can do software reset for all or
just reset command and data lines.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
Changes from v2:
 - Simplify the sdhci_sprd_reset() by issuing sdhci_reset().

Changes from v1:
 - Add a specific reset operation instead of changing the core to avoid
 affecting other hardware.
---
 drivers/mmc/host/sdhci-sprd.c |   19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

Comments

Adrian Hunter July 16, 2019, 10:39 a.m. UTC | #1
On 16/07/19 11:39 AM, Baolin Wang wrote:
> In sdhci_runtime_resume_host() function, we will always do software reset
> for all, which will cause Spreadtrum host controller work abnormally after
> resuming.
> 
> Thus for Spreadtrum platform that do not power down the SD/eMMC card during
> runtime suspend, we should not do software reset for all. To fix this
> issue, adding a specific reset operation that add one condition to validate
> the MMC_CAP_AGGRESSIVE_PM to decide if we can do software reset for all or
> just reset command and data lines.
> 
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> Changes from v2:
>  - Simplify the sdhci_sprd_reset() by issuing sdhci_reset().
> 
> Changes from v1:
>  - Add a specific reset operation instead of changing the core to avoid
>  affecting other hardware.
> ---
>  drivers/mmc/host/sdhci-sprd.c |   19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
> index 603a5d9..bc9393c 100644
> --- a/drivers/mmc/host/sdhci-sprd.c
> +++ b/drivers/mmc/host/sdhci-sprd.c
> @@ -373,6 +373,23 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
>  	return 1 << 31;
>  }
>  
> +static void sdhci_sprd_reset(struct sdhci_host *host, u8 mask)
> +{
> +	struct mmc_host *mmc = host->mmc;
> +
> +	/*
> +	 * When try to reset controller after runtime suspend, we should not
> +	 * reset for all if the SD/eMMC card is not power down, just reset
> +	 * command and data lines instead. Otherwise will meet some strange
> +	 * behaviors for Spreadtrum host controller.
> +	 */
> +	if (host->runtime_suspended && (mask & SDHCI_RESET_ALL) &&
> +	    !(mmc->caps & MMC_CAP_AGGRESSIVE_PM))

MMC_CAP_AGGRESSIVE_PM does not necessarily mean that the card will have been
runtime suspended.

What about checking if the card power is on? i.e.

	if (host->runtime_suspended && (mask & SDHCI_RESET_ALL) &&
	    mmc->ios.power_mode == MMC_POWER_ON)

> +		mask = SDHCI_RESET_CMD | SDHCI_RESET_DATA;
> +
> +	sdhci_reset(host, mask);
> +}
> +
>  static struct sdhci_ops sdhci_sprd_ops = {
>  	.read_l = sdhci_sprd_readl,
>  	.write_l = sdhci_sprd_writel,
> @@ -381,7 +398,7 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
>  	.get_max_clock = sdhci_sprd_get_max_clock,
>  	.get_min_clock = sdhci_sprd_get_min_clock,
>  	.set_bus_width = sdhci_set_bus_width,
> -	.reset = sdhci_reset,
> +	.reset = sdhci_sprd_reset,
>  	.set_uhs_signaling = sdhci_sprd_set_uhs_signaling,
>  	.hw_reset = sdhci_sprd_hw_reset,
>  	.get_max_timeout_count = sdhci_sprd_get_max_timeout_count,
>
Baolin Wang July 16, 2019, 10:52 a.m. UTC | #2
On Tue, 16 Jul 2019 at 18:40, Adrian Hunter <adrian.hunter@intel.com> wrote:
>
> On 16/07/19 11:39 AM, Baolin Wang wrote:
> > In sdhci_runtime_resume_host() function, we will always do software reset
> > for all, which will cause Spreadtrum host controller work abnormally after
> > resuming.
> >
> > Thus for Spreadtrum platform that do not power down the SD/eMMC card during
> > runtime suspend, we should not do software reset for all. To fix this
> > issue, adding a specific reset operation that add one condition to validate
> > the MMC_CAP_AGGRESSIVE_PM to decide if we can do software reset for all or
> > just reset command and data lines.
> >
> > Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> > ---
> > Changes from v2:
> >  - Simplify the sdhci_sprd_reset() by issuing sdhci_reset().
> >
> > Changes from v1:
> >  - Add a specific reset operation instead of changing the core to avoid
> >  affecting other hardware.
> > ---
> >  drivers/mmc/host/sdhci-sprd.c |   19 ++++++++++++++++++-
> >  1 file changed, 18 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
> > index 603a5d9..bc9393c 100644
> > --- a/drivers/mmc/host/sdhci-sprd.c
> > +++ b/drivers/mmc/host/sdhci-sprd.c
> > @@ -373,6 +373,23 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
> >       return 1 << 31;
> >  }
> >
> > +static void sdhci_sprd_reset(struct sdhci_host *host, u8 mask)
> > +{
> > +     struct mmc_host *mmc = host->mmc;
> > +
> > +     /*
> > +      * When try to reset controller after runtime suspend, we should not
> > +      * reset for all if the SD/eMMC card is not power down, just reset
> > +      * command and data lines instead. Otherwise will meet some strange
> > +      * behaviors for Spreadtrum host controller.
> > +      */
> > +     if (host->runtime_suspended && (mask & SDHCI_RESET_ALL) &&
> > +         !(mmc->caps & MMC_CAP_AGGRESSIVE_PM))
>
> MMC_CAP_AGGRESSIVE_PM does not necessarily mean that the card will have been
> runtime suspended.
>
> What about checking if the card power is on? i.e.

Yes, you are totally correct. I'll fix this in next version. Thanks
for your comments.

>         if (host->runtime_suspended && (mask & SDHCI_RESET_ALL) &&
>             mmc->ios.power_mode == MMC_POWER_ON)
>
> > +             mask = SDHCI_RESET_CMD | SDHCI_RESET_DATA;
> > +
> > +     sdhci_reset(host, mask);
> > +}
> > +
> >  static struct sdhci_ops sdhci_sprd_ops = {
> >       .read_l = sdhci_sprd_readl,
> >       .write_l = sdhci_sprd_writel,
> > @@ -381,7 +398,7 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
> >       .get_max_clock = sdhci_sprd_get_max_clock,
> >       .get_min_clock = sdhci_sprd_get_min_clock,
> >       .set_bus_width = sdhci_set_bus_width,
> > -     .reset = sdhci_reset,
> > +     .reset = sdhci_sprd_reset,
> >       .set_uhs_signaling = sdhci_sprd_set_uhs_signaling,
> >       .hw_reset = sdhci_sprd_hw_reset,
> >       .get_max_timeout_count = sdhci_sprd_get_max_timeout_count,
> >
>

Patch
diff mbox series

diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index 603a5d9..bc9393c 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -373,6 +373,23 @@  static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
 	return 1 << 31;
 }
 
+static void sdhci_sprd_reset(struct sdhci_host *host, u8 mask)
+{
+	struct mmc_host *mmc = host->mmc;
+
+	/*
+	 * When try to reset controller after runtime suspend, we should not
+	 * reset for all if the SD/eMMC card is not power down, just reset
+	 * command and data lines instead. Otherwise will meet some strange
+	 * behaviors for Spreadtrum host controller.
+	 */
+	if (host->runtime_suspended && (mask & SDHCI_RESET_ALL) &&
+	    !(mmc->caps & MMC_CAP_AGGRESSIVE_PM))
+		mask = SDHCI_RESET_CMD | SDHCI_RESET_DATA;
+
+	sdhci_reset(host, mask);
+}
+
 static struct sdhci_ops sdhci_sprd_ops = {
 	.read_l = sdhci_sprd_readl,
 	.write_l = sdhci_sprd_writel,
@@ -381,7 +398,7 @@  static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
 	.get_max_clock = sdhci_sprd_get_max_clock,
 	.get_min_clock = sdhci_sprd_get_min_clock,
 	.set_bus_width = sdhci_set_bus_width,
-	.reset = sdhci_reset,
+	.reset = sdhci_sprd_reset,
 	.set_uhs_signaling = sdhci_sprd_set_uhs_signaling,
 	.hw_reset = sdhci_sprd_hw_reset,
 	.get_max_timeout_count = sdhci_sprd_get_max_timeout_count,