| Message ID | aa415583bf6b812b0249093a601aa31412f3a1cf.1563277838.git.mchehab+samsung@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | pending doc patches for 5.3-rc | expand |
On Tue, Jul 16, 2019 at 09:10:42AM -0300, Mauro Carvalho Chehab wrote: > Some files got renamed but probably due to some merge conflicts, > a few references still point to the old locations. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> > --- > Documentation/RCU/rculist_nulls.txt | 2 +- > Documentation/devicetree/bindings/arm/idle-states.txt | 2 +- > Documentation/locking/spinlocks.rst | 4 ++-- > Documentation/memory-barriers.txt | 2 +- > Documentation/translations/ko_KR/memory-barriers.txt | 2 +- > Documentation/watchdog/hpwdt.rst | 2 +- For: Documentation/watchdog/hpwdt.rst Reviewed-by: Jerry Hoemann <jerry.hoemann@hpe.com> > MAINTAINERS | 8 ++++---- > drivers/gpu/drm/drm_modes.c | 2 +- > drivers/i2c/busses/i2c-nvidia-gpu.c | 2 +- > drivers/scsi/hpsa.c | 4 ++-- > 10 files changed, 15 insertions(+), 15 deletions(-) > > diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt > index 8151f0195f76..23f115dc87cf 100644 > --- a/Documentation/RCU/rculist_nulls.txt > +++ b/Documentation/RCU/rculist_nulls.txt > @@ -1,7 +1,7 @@ > Using hlist_nulls to protect read-mostly linked lists and > objects using SLAB_TYPESAFE_BY_RCU allocations. > > -Please read the basics in Documentation/RCU/listRCU.txt > +Please read the basics in Documentation/RCU/listRCU.rst > > Using special makers (called 'nulls') is a convenient way > to solve following problem : > diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt > index 326f29b270ad..2d325bed37e5 100644 > --- a/Documentation/devicetree/bindings/arm/idle-states.txt > +++ b/Documentation/devicetree/bindings/arm/idle-states.txt > @@ -703,4 +703,4 @@ cpus { > https://www.devicetree.org/specifications/ > > [6] ARM Linux Kernel documentation - Booting AArch64 Linux > - Documentation/arm64/booting.txt > + Documentation/arm64/booting.rst > diff --git a/Documentation/locking/spinlocks.rst b/Documentation/locking/spinlocks.rst > index 098107fb7d86..e93ec6645238 100644 > --- a/Documentation/locking/spinlocks.rst > +++ b/Documentation/locking/spinlocks.rst > @@ -82,7 +82,7 @@ itself. The read lock allows many concurrent readers. Anything that > **changes** the list will have to get the write lock. > > NOTE! RCU is better for list traversal, but requires careful > - attention to design detail (see Documentation/RCU/listRCU.txt). > + attention to design detail (see Documentation/RCU/listRCU.rst). > > Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_ > time need to do any changes (even if you don't do it every time), you have > @@ -90,7 +90,7 @@ to get the write-lock at the very beginning. > > NOTE! We are working hard to remove reader-writer spinlocks in most > cases, so please don't add a new one without consensus. (Instead, see > - Documentation/RCU/rcu.txt for complete information.) > + Documentation/RCU/rcu.rst for complete information.) > > ---- > > diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt > index 045bb8148fe9..1adbb8a371c7 100644 > --- a/Documentation/memory-barriers.txt > +++ b/Documentation/memory-barriers.txt > @@ -548,7 +548,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee: > > [*] For information on bus mastering DMA and coherency please read: > > - Documentation/PCI/pci.rst > + Documentation/driver-api/pci/pci.rst > Documentation/DMA-API-HOWTO.txt > Documentation/DMA-API.txt > > diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt > index a33c2a536542..2774624ee843 100644 > --- a/Documentation/translations/ko_KR/memory-barriers.txt > +++ b/Documentation/translations/ko_KR/memory-barriers.txt > @@ -569,7 +569,7 @@ ACQUIRE 는 해당 오퍼레이션의 로드 부분에만 적용되고 RELEASE > > [*] 버스 마스터링 DMA 와 일관성에 대해서는 다음을 참고하시기 바랍니다: > > - Documentation/PCI/pci.rst > + Documentation/driver-api/pci/pci.rst > Documentation/DMA-API-HOWTO.txt > Documentation/DMA-API.txt > > diff --git a/Documentation/watchdog/hpwdt.rst b/Documentation/watchdog/hpwdt.rst > index 94a96371113e..49c647dba8aa 100644 > --- a/Documentation/watchdog/hpwdt.rst > +++ b/Documentation/watchdog/hpwdt.rst > @@ -59,7 +59,7 @@ Last reviewed: 08/20/2018 > and loop forever. This is generally not what a watchdog user wants. > > For those wishing to learn more please see: > - Documentation/kdump/kdump.rst > + Documentation/admin-guide/kdump/kdump.rst > Documentation/admin-guide/kernel-parameters.txt (panic=) > Your Linux Distribution specific documentation. > > diff --git a/MAINTAINERS b/MAINTAINERS > index b3a5c72f3298..b0acc138e9e9 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -899,7 +899,7 @@ L: linux-iio@vger.kernel.org > W: http://ez.analog.com/community/linux-device-drivers > S: Supported > F: drivers/iio/adc/ad7124.c > -F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt > +F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml > > ANALOG DEVICES INC AD7606 DRIVER > M: Stefan Popa <stefan.popa@analog.com> > @@ -4189,7 +4189,7 @@ M: Jens Axboe <axboe@kernel.dk> > L: cgroups@vger.kernel.org > L: linux-block@vger.kernel.org > T: git git://git.kernel.dk/linux-block > -F: Documentation/cgroup-v1/blkio-controller.rst > +F: Documentation/admin-guide/cgroup-v1/blkio-controller.rst > F: block/blk-cgroup.c > F: include/linux/blk-cgroup.h > F: block/blk-throttle.c > @@ -6848,7 +6848,7 @@ R: Sagi Shahar <sagis@google.com> > R: Jon Olson <jonolson@google.com> > L: netdev@vger.kernel.org > S: Supported > -F: Documentation/networking/device_drivers/google/gve.txt > +F: Documentation/networking/device_drivers/google/gve.rst > F: drivers/net/ethernet/google > > GPD POCKET FAN DRIVER > @@ -12096,7 +12096,7 @@ M: Juergen Gross <jgross@suse.com> > M: Alok Kataria <akataria@vmware.com> > L: virtualization@lists.linux-foundation.org > S: Supported > -F: Documentation/virtual/paravirt_ops.txt > +F: Documentation/virtual/paravirt_ops.rst > F: arch/*/kernel/paravirt* > F: arch/*/include/asm/paravirt*.h > F: include/linux/hypervisor.h > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c > index 57e6408288c8..4645af681ef8 100644 > --- a/drivers/gpu/drm/drm_modes.c > +++ b/drivers/gpu/drm/drm_modes.c > @@ -1680,7 +1680,7 @@ static int drm_mode_parse_cmdline_options(char *str, size_t len, > * > * Additionals options can be provided following the mode, using a comma to > * separate each option. Valid options can be found in > - * Documentation/fb/modedb.txt. > + * Documentation/fb/modedb.rst. > * > * The intermediate drm_cmdline_mode structure is required to store additional > * options from the command line modline like the force-enable/disable flag. > diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c > index cfc76b5de726..5a1235fd86bb 100644 > --- a/drivers/i2c/busses/i2c-nvidia-gpu.c > +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c > @@ -364,7 +364,7 @@ static void gpu_i2c_remove(struct pci_dev *pdev) > /* > * We need gpu_i2c_suspend() even if it is stub, for runtime pm to work > * correctly. Without it, lspci shows runtime pm status as "D0" for the card. > - * Documentation/power/pci.txt also insists for driver to provide this. > + * Documentation/power/pci.rst also insists for driver to provide this. > */ > static __maybe_unused int gpu_i2c_suspend(struct device *dev) > { > diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c > index 43a6b5350775..eaf6177ac9ee 100644 > --- a/drivers/scsi/hpsa.c > +++ b/drivers/scsi/hpsa.c > @@ -7798,7 +7798,7 @@ static void hpsa_free_pci_init(struct ctlr_info *h) > hpsa_disable_interrupt_mode(h); /* pci_init 2 */ > /* > * call pci_disable_device before pci_release_regions per > - * Documentation/PCI/pci.rst > + * Documentation/driver-api/pci/pci.rst > */ > pci_disable_device(h->pdev); /* pci_init 1 */ > pci_release_regions(h->pdev); /* pci_init 2 */ > @@ -7881,7 +7881,7 @@ static int hpsa_pci_init(struct ctlr_info *h) > clean1: > /* > * call pci_disable_device before pci_release_regions per > - * Documentation/PCI/pci.rst > + * Documentation/driver-api/pci/pci.rst > */ > pci_disable_device(h->pdev); > pci_release_regions(h->pdev); > -- > 2.21.0
On Tue, Jul 16, 2019 at 09:10:42AM -0300, Mauro Carvalho Chehab wrote: > Some files got renamed but probably due to some merge conflicts, > a few references still point to the old locations. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # I2C part
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt index 8151f0195f76..23f115dc87cf 100644 --- a/Documentation/RCU/rculist_nulls.txt +++ b/Documentation/RCU/rculist_nulls.txt @@ -1,7 +1,7 @@ Using hlist_nulls to protect read-mostly linked lists and objects using SLAB_TYPESAFE_BY_RCU allocations. -Please read the basics in Documentation/RCU/listRCU.txt +Please read the basics in Documentation/RCU/listRCU.rst Using special makers (called 'nulls') is a convenient way to solve following problem : diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 326f29b270ad..2d325bed37e5 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -703,4 +703,4 @@ cpus { https://www.devicetree.org/specifications/ [6] ARM Linux Kernel documentation - Booting AArch64 Linux - Documentation/arm64/booting.txt + Documentation/arm64/booting.rst diff --git a/Documentation/locking/spinlocks.rst b/Documentation/locking/spinlocks.rst index 098107fb7d86..e93ec6645238 100644 --- a/Documentation/locking/spinlocks.rst +++ b/Documentation/locking/spinlocks.rst @@ -82,7 +82,7 @@ itself. The read lock allows many concurrent readers. Anything that **changes** the list will have to get the write lock. NOTE! RCU is better for list traversal, but requires careful - attention to design detail (see Documentation/RCU/listRCU.txt). + attention to design detail (see Documentation/RCU/listRCU.rst). Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_ time need to do any changes (even if you don't do it every time), you have @@ -90,7 +90,7 @@ to get the write-lock at the very beginning. NOTE! We are working hard to remove reader-writer spinlocks in most cases, so please don't add a new one without consensus. (Instead, see - Documentation/RCU/rcu.txt for complete information.) + Documentation/RCU/rcu.rst for complete information.) ---- diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 045bb8148fe9..1adbb8a371c7 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -548,7 +548,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee: [*] For information on bus mastering DMA and coherency please read: - Documentation/PCI/pci.rst + Documentation/driver-api/pci/pci.rst Documentation/DMA-API-HOWTO.txt Documentation/DMA-API.txt diff --git a/Documentation/translations/ko_KR/memory-barriers.txt b/Documentation/translations/ko_KR/memory-barriers.txt index a33c2a536542..2774624ee843 100644 --- a/Documentation/translations/ko_KR/memory-barriers.txt +++ b/Documentation/translations/ko_KR/memory-barriers.txt @@ -569,7 +569,7 @@ ACQUIRE 는 해당 오퍼레이션의 로드 부분에만 적용되고 RELEASE [*] 버스 마스터링 DMA 와 일관성에 대해서는 다음을 참고하시기 바랍니다: - Documentation/PCI/pci.rst + Documentation/driver-api/pci/pci.rst Documentation/DMA-API-HOWTO.txt Documentation/DMA-API.txt diff --git a/Documentation/watchdog/hpwdt.rst b/Documentation/watchdog/hpwdt.rst index 94a96371113e..49c647dba8aa 100644 --- a/Documentation/watchdog/hpwdt.rst +++ b/Documentation/watchdog/hpwdt.rst @@ -59,7 +59,7 @@ Last reviewed: 08/20/2018 and loop forever. This is generally not what a watchdog user wants. For those wishing to learn more please see: - Documentation/kdump/kdump.rst + Documentation/admin-guide/kdump/kdump.rst Documentation/admin-guide/kernel-parameters.txt (panic=) Your Linux Distribution specific documentation. diff --git a/MAINTAINERS b/MAINTAINERS index b3a5c72f3298..b0acc138e9e9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -899,7 +899,7 @@ L: linux-iio@vger.kernel.org W: http://ez.analog.com/community/linux-device-drivers S: Supported F: drivers/iio/adc/ad7124.c -F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt +F: Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml ANALOG DEVICES INC AD7606 DRIVER M: Stefan Popa <stefan.popa@analog.com> @@ -4189,7 +4189,7 @@ M: Jens Axboe <axboe@kernel.dk> L: cgroups@vger.kernel.org L: linux-block@vger.kernel.org T: git git://git.kernel.dk/linux-block -F: Documentation/cgroup-v1/blkio-controller.rst +F: Documentation/admin-guide/cgroup-v1/blkio-controller.rst F: block/blk-cgroup.c F: include/linux/blk-cgroup.h F: block/blk-throttle.c @@ -6848,7 +6848,7 @@ R: Sagi Shahar <sagis@google.com> R: Jon Olson <jonolson@google.com> L: netdev@vger.kernel.org S: Supported -F: Documentation/networking/device_drivers/google/gve.txt +F: Documentation/networking/device_drivers/google/gve.rst F: drivers/net/ethernet/google GPD POCKET FAN DRIVER @@ -12096,7 +12096,7 @@ M: Juergen Gross <jgross@suse.com> M: Alok Kataria <akataria@vmware.com> L: virtualization@lists.linux-foundation.org S: Supported -F: Documentation/virtual/paravirt_ops.txt +F: Documentation/virtual/paravirt_ops.rst F: arch/*/kernel/paravirt* F: arch/*/include/asm/paravirt*.h F: include/linux/hypervisor.h diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 57e6408288c8..4645af681ef8 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -1680,7 +1680,7 @@ static int drm_mode_parse_cmdline_options(char *str, size_t len, * * Additionals options can be provided following the mode, using a comma to * separate each option. Valid options can be found in - * Documentation/fb/modedb.txt. + * Documentation/fb/modedb.rst. * * The intermediate drm_cmdline_mode structure is required to store additional * options from the command line modline like the force-enable/disable flag. diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c index cfc76b5de726..5a1235fd86bb 100644 --- a/drivers/i2c/busses/i2c-nvidia-gpu.c +++ b/drivers/i2c/busses/i2c-nvidia-gpu.c @@ -364,7 +364,7 @@ static void gpu_i2c_remove(struct pci_dev *pdev) /* * We need gpu_i2c_suspend() even if it is stub, for runtime pm to work * correctly. Without it, lspci shows runtime pm status as "D0" for the card. - * Documentation/power/pci.txt also insists for driver to provide this. + * Documentation/power/pci.rst also insists for driver to provide this. */ static __maybe_unused int gpu_i2c_suspend(struct device *dev) { diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 43a6b5350775..eaf6177ac9ee 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -7798,7 +7798,7 @@ static void hpsa_free_pci_init(struct ctlr_info *h) hpsa_disable_interrupt_mode(h); /* pci_init 2 */ /* * call pci_disable_device before pci_release_regions per - * Documentation/PCI/pci.rst + * Documentation/driver-api/pci/pci.rst */ pci_disable_device(h->pdev); /* pci_init 1 */ pci_release_regions(h->pdev); /* pci_init 2 */ @@ -7881,7 +7881,7 @@ static int hpsa_pci_init(struct ctlr_info *h) clean1: /* * call pci_disable_device before pci_release_regions per - * Documentation/PCI/pci.rst + * Documentation/driver-api/pci/pci.rst */ pci_disable_device(h->pdev); pci_release_regions(h->pdev);
Some files got renamed but probably due to some merge conflicts, a few references still point to the old locations. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> --- Documentation/RCU/rculist_nulls.txt | 2 +- Documentation/devicetree/bindings/arm/idle-states.txt | 2 +- Documentation/locking/spinlocks.rst | 4 ++-- Documentation/memory-barriers.txt | 2 +- Documentation/translations/ko_KR/memory-barriers.txt | 2 +- Documentation/watchdog/hpwdt.rst | 2 +- MAINTAINERS | 8 ++++---- drivers/gpu/drm/drm_modes.c | 2 +- drivers/i2c/busses/i2c-nvidia-gpu.c | 2 +- drivers/scsi/hpsa.c | 4 ++-- 10 files changed, 15 insertions(+), 15 deletions(-)