diff mbox series

ARM: dts: ux500: Fix up the thermal nodes

Message ID 20190717064225.7695-1-linus.walleij@linaro.org (mailing list archive)
State Mainlined
Commit aef41a4d88ef11a04b29d9f2ffdfd46eb317d7d8
Headers show
Series ARM: dts: ux500: Fix up the thermal nodes | expand

Commit Message

Linus Walleij July 17, 2019, 6:42 a.m. UTC 
The thermal driver for the DB8500 was never properly converted
to device tree, the node should definately be activated for
all board variants so move this down into the main SoC
DTSI and and default on.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi  | 22 +++++++++++++++++++++-
 arch/arm/boot/dts/ste-snowball.dts | 29 -----------------------------
 2 files changed, 21 insertions(+), 30 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 339da70d4e83..90dcbc3a29c3 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -505,10 +505,30 @@ 
 			thermal@801573c0 {
 				compatible = "stericsson,db8500-thermal";
 				reg = <0x801573c0 0x40>;
+				interrupt-parent = <&prcmu>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
 					     <22 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
-				status = "disabled";
+				num-trips = <4>;
+
+				trip0-temp = <70000>;
+				trip0-type = "active";
+				trip0-cdev-num = <1>;
+				trip0-cdev-name0 = "thermal-cpufreq-0";
+
+				trip1-temp = <75000>;
+				trip1-type = "active";
+				trip1-cdev-num = <1>;
+				trip1-cdev-name0 = "thermal-cpufreq-0";
+
+				trip2-temp = <80000>;
+				trip2-type = "active";
+				trip2-cdev-num = <1>;
+				trip2-cdev-name0 = "thermal-cpufreq-0";
+
+				trip3-temp = <85000>;
+				trip3-type = "critical";
+				trip3-cdev-num = <0>;
 			};
 
 			db8500-prcmu-regulators {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 3428290644ba..064e8abec954 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,40 +376,11 @@ 
 			pinctrl-0 = <&ssp0_snowball_mode>;
 		};
 
-		cpufreq-cooling {
-			status = "okay";
-		};
-
 		prcmu@80157000 {
 			cpufreq {
 				status = "okay";
 			};
 
-			thermal@801573c0 {
-				num-trips = <4>;
-
-				trip0-temp = <70000>;
-				trip0-type = "active";
-				trip0-cdev-num = <1>;
-				trip0-cdev-name0 = "thermal-cpufreq-0";
-
-				trip1-temp = <75000>;
-				trip1-type = "active";
-				trip1-cdev-num = <1>;
-				trip1-cdev-name0 = "thermal-cpufreq-0";
-
-				trip2-temp = <80000>;
-				trip2-type = "active";
-				trip2-cdev-num = <1>;
-				trip2-cdev-name0 = "thermal-cpufreq-0";
-
-				trip3-temp = <85000>;
-				trip3-type = "critical";
-				trip3-cdev-num = <0>;
-
-				status = "okay";
-			};
-
 			ab8500 {
 				ab8500-gpio {
 					/*