[RFC,12/18] dt-bindings: pinctrl: bcm2835: Add brcm, bcm2838 compatible
diff mbox series

Message ID 1563393026-17118-13-git-send-email-wahrenst@gmx.net
State New
Headers show
Series
  • ARM: Add minimal Raspberry Pi 4 support
Related show

Commit Message

Stefan Wahren July 17, 2019, 7:50 p.m. UTC
Add a new compatible for the BCM2838.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt | 1 +
 1 file changed, 1 insertion(+)

--
2.7.4

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index ac6d614..f7835a6 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -7,6 +7,7 @@  Required properties:
 - compatible: "brcm,bcm2835-gpio"
 - compatible: should be one of:
   "brcm,bcm2835-gpio" - BCM2835 compatible pinctrl
+  "brcm,bcm2838-gpio" - BCM2838 compatible pinctrl
   "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
 - reg: Should contain the physical address of the GPIO module's registers.
 - gpio-controller: Marks the device node as a GPIO controller.