[20/26] drm/dp_mst: Don't forget to update port->input in drm_dp_mst_handle_conn_stat()
diff mbox series

Message ID 20190718014329.8107-21-lyude@redhat.com
State New
Headers show
Series
  • DP MST Refactors + debugging tools + suspend/resume reprobing
Related show

Commit Message

Lyude Paul July 18, 2019, 1:42 a.m. UTC
This probably hasn't caused any problems up until now since it's
probably nearly impossible to encounter this in the wild, however if we
were to receive a connection status notification from the MST hub after
resume while we're in the middle of reprobing the link addresses for a
topology then there's a much larger chance that a port could have
changed from being an output port to input port (or vice versa). If we
forget to update this bit of information, we'll potentially ignore a
valid PDT change on a downstream port because we think it's an input
port.

So, make sure we read the input_port field in connection status
notifications in drm_dp_mst_handle_conn_stat() to prevent this from
happening once we've implemented suspend/resume reprobing.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
 drivers/gpu/drm/drm_dp_mst_topology.c | 51 +++++++++++++++++++--------
 1 file changed, 37 insertions(+), 14 deletions(-)

Patch
diff mbox series

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index dffd80f31537..126db36c9337 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -1989,18 +1989,23 @@  static void
 drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
 			    struct drm_dp_connection_status_notify *conn_stat)
 {
-	struct drm_device *dev = mstb->mgr->dev;
+	struct drm_dp_mst_topology_mgr *mgr = mstb->mgr;
+	struct drm_device *dev = mgr->dev;
 	struct drm_dp_mst_port *port;
-	int old_ddps;
-	bool dowork = false;
+	struct drm_connector *connector_to_destroy = NULL;
+	int old_ddps, ret;
+	u8 new_pdt;
+	bool dowork = false, create_connector = false;
 
 	port = drm_dp_get_port(mstb, conn_stat->port_number);
 	if (!port)
 		return;
 
+	mutex_lock(&port->lock);
 	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
 
 	old_ddps = port->ddps;
+	port->input = conn_stat->input_port;
 	port->mcs = conn_stat->message_capability_status;
 	port->ldps = conn_stat->legacy_device_plug_status;
 	port->ddps = conn_stat->displayport_device_plug_status;
@@ -2013,23 +2018,41 @@  drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
 		}
 	}
 
-	if (!port->input) {
-		int ret = drm_dp_port_set_pdt(port,
-					      conn_stat->peer_device_type);
-		if (ret == 1) {
-			dowork = true;
-		} else if (ret < 0) {
-			DRM_ERROR("Failed to change PDT for port %p: %d\n",
-				  port, ret);
-			dowork = false;
-		}
+	new_pdt = port->input ? DP_PEER_DEVICE_NONE : conn_stat->peer_device_type;
+
+	ret = drm_dp_port_set_pdt(port, new_pdt);
+	if (ret == 1) {
+		dowork = true;
+	} else if (ret < 0) {
+		DRM_ERROR("Failed to change PDT for port %p: %d\n",
+			  port, ret);
+		dowork = false;
+	}
+
+	/*
+	 * We unset port->connector before dropping connection_mutex so that
+	 * there's no chance any of the atomic MST helpers can accidentally
+	 * associate a to-be-destroyed connector with a port.
+	 */
+	if (port->connector && port->input) {
+		connector_to_destroy = port->connector;
+		port->connector = NULL;
+	} else if (!port->connector && !port->input) {
+		create_connector = true;
 	}
 
 	drm_modeset_unlock(&dev->mode_config.connection_mutex);
+
+	if (connector_to_destroy)
+		mgr->cbs->destroy_connector(mgr, connector_to_destroy);
+	else if (create_connector)
+		drm_dp_mst_port_add_connector(mstb, port);
+
+	mutex_unlock(&port->lock);
+
 	drm_dp_mst_topology_put_port(port);
 	if (dowork)
 		queue_work(system_long_wq, &mstb->mgr->work);
-
 }
 
 static struct drm_dp_mst_branch *drm_dp_get_mst_branch_device(struct drm_dp_mst_topology_mgr *mgr,