drm/dp/dsc: Add Support for all BPCs supported by TGL
diff mbox series

Message ID 20190718185015.5193-1-anusha.srivatsa@intel.com
State New
Headers show
Series
  • drm/dp/dsc: Add Support for all BPCs supported by TGL
Related show

Commit Message

Srivatsa, Anusha July 18, 2019, 6:50 p.m. UTC
DSC engine on ICL supports only 8 and 10 BPC as the input
BPC. But DSC engine in TGL supports 8, 10 and 12 BPC.
Add 12 BPC support for DSC while calculating compression
configuration.

v2: Remove the separate define TGL_DP_DSC_MAX_SUPPORTED_BPC
and use the value directly.(More such defines can be removed
as part of future patches). (Ville)

v3: Use values directly instead of accessing the defines
everytime for min and max DSC BPC.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

Patch
diff mbox series

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 0eb5d66f87a7..947c7e911304 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -69,8 +69,6 @@ 
 
 /* DP DSC small joiner has 2 FIFOs each of 640 x 6 bytes */
 #define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER	61440
-#define DP_DSC_MIN_SUPPORTED_BPC		8
-#define DP_DSC_MAX_SUPPORTED_BPC		10
 
 /* DP DSC throughput values used for slice count calculations KPixels/s */
 #define DP_DSC_PEAK_PIXEL_RATE			2720000
@@ -1914,11 +1912,17 @@  static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
 		return -EINVAL;
 
-	dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
-			    conn_state->max_requested_bpc);
+	/* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */
+	if (INTEL_GEN(dev_priv) >= 12)
+		dsc_max_bpc = min_t(u8, 12, conn_state->max_requested_bpc);
+	else
+		dsc_max_bpc = min_t(u8, 10,
+				    conn_state->max_requested_bpc);
 
 	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc);
-	if (pipe_bpp < DP_DSC_MIN_SUPPORTED_BPC * 3) {
+
+	/* Min Input BPC for ICL+ is 8 */
+	if (pipe_bpp < 8 * 3) {
 		DRM_DEBUG_KMS("No DSC support for less than 8bpc\n");
 		return -EINVAL;
 	}