[RFC,2/2] serial: pl011: Don't bother pushing more TX data while TX irq is active
diff mbox series

Message ID 1563543325-12463-3-git-send-email-Dave.Martin@arm.com
State New
Headers show
Series
  • serial: pl011: Fix TX dropping race
Related show

Commit Message

Dave Martin July 19, 2019, 1:35 p.m. UTC
When the TX irq is active, writing chars to the TX FIFO from
anywhere except pl011_int() is pointless: the UART is already busy,
and new chars will be picked up by pl011_int() as soon as there is
FIFO space.

To reduce the scope for surprises, bail out of pl011_start_tx_pio()
without attempting to write to the FIFO or start TX DMA if the TX FIFO
interrupt is already in use.

This should also avoid pointless overhead in some situations.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>

---

Please test both with and without this patch.

I believe with the previous patch in place, this patch is not strictly
necessary.  However, if the UART is actively transmitting in the
background already, it does make sense not to waste time trying polling
the FIFO fill status or setting up DMA etc.
---
 drivers/tty/serial/amba-pl011.c | 4 ++++
 1 file changed, 4 insertions(+)

Patch
diff mbox series

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index e24bbc0..f28935a 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1318,6 +1318,10 @@  static void pl011_start_tx(struct uart_port *port)
 	struct uart_amba_port *uap =
 	    container_of(port, struct uart_amba_port, port);
 
+	/* It's pointless to kick the UART if it's already transmitting... */
+	if (uap->im & UART011_TXIM)
+		return;
+
 	if (!pl011_dma_tx_start(uap))
 		pl011_start_tx_pio(uap);
 }