[v3,2/5] opp: core: add regulators enable and disable
diff mbox series

Message ID 20190719150535.15501-3-k.konieczny@partner.samsung.com
State Not Applicable, archived
Headers show
Series
  • add coupled regulators for Exynos5422/5800
Related show

Commit Message

Kamil Konieczny July 19, 2019, 3:05 p.m. UTC
Add enable regulators to dev_pm_opp_set_regulators() and disable
regulators to dev_pm_opp_put_regulators(). Even if bootloader
leaves regulators enabled, they should be enabled in kernel in
order to increase the reference count.

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
---
Changes in v3:
- corrected error path in enable
- improved commit message
Changes in v2:
- move regulator enable and disable into loop
---
 drivers/opp/core.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

Comments

Viresh Kumar July 23, 2019, 1:48 a.m. UTC | #1
On 19-07-19, 17:05, k.konieczny@partner.samsung.com wrote:
> Add enable regulators to dev_pm_opp_set_regulators() and disable
> regulators to dev_pm_opp_put_regulators(). Even if bootloader
> leaves regulators enabled, they should be enabled in kernel in
> order to increase the reference count.
> 
> Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
> ---
> Changes in v3:
> - corrected error path in enable
> - improved commit message
> Changes in v2:
> - move regulator enable and disable into loop
> ---
>  drivers/opp/core.c | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/opp/core.c b/drivers/opp/core.c
> index 0e7703fe733f..a8a480cdabab 100644
> --- a/drivers/opp/core.c
> +++ b/drivers/opp/core.c
> @@ -1570,6 +1570,12 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
>  			goto free_regulators;
>  		}
>  
> +		ret = regulator_enable(reg);
> +		if (ret < 0) {
> +			regulator_put(reg);
> +			goto free_regulators;
> +		}
> +
>  		opp_table->regulators[i] = reg;
>  	}
>  
> @@ -1583,8 +1589,10 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
>  	return opp_table;
>  
>  free_regulators:
> -	while (i != 0)
> -		regulator_put(opp_table->regulators[--i]);
> +	while (i--) {
> +		regulator_disable(opp_table->regulators[i]);
> +		regulator_put(opp_table->regulators[i]);
> +	}
>  
>  	kfree(opp_table->regulators);
>  	opp_table->regulators = NULL;
> @@ -1610,8 +1618,10 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
>  	/* Make sure there are no concurrent readers while updating opp_table */
>  	WARN_ON(!list_empty(&opp_table->opp_list));
>  
> -	for (i = opp_table->regulator_count - 1; i >= 0; i--)
> +	for (i = opp_table->regulator_count - 1; i >= 0; i--) {
> +		regulator_disable(opp_table->regulators[i]);
>  		regulator_put(opp_table->regulators[i]);
> +	}
>  
>  	_free_set_opp_data(opp_table);

Applied. Thanks.

Patch
diff mbox series

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 0e7703fe733f..a8a480cdabab 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -1570,6 +1570,12 @@  struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
 			goto free_regulators;
 		}
 
+		ret = regulator_enable(reg);
+		if (ret < 0) {
+			regulator_put(reg);
+			goto free_regulators;
+		}
+
 		opp_table->regulators[i] = reg;
 	}
 
@@ -1583,8 +1589,10 @@  struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
 	return opp_table;
 
 free_regulators:
-	while (i != 0)
-		regulator_put(opp_table->regulators[--i]);
+	while (i--) {
+		regulator_disable(opp_table->regulators[i]);
+		regulator_put(opp_table->regulators[i]);
+	}
 
 	kfree(opp_table->regulators);
 	opp_table->regulators = NULL;
@@ -1610,8 +1618,10 @@  void dev_pm_opp_put_regulators(struct opp_table *opp_table)
 	/* Make sure there are no concurrent readers while updating opp_table */
 	WARN_ON(!list_empty(&opp_table->opp_list));
 
-	for (i = opp_table->regulator_count - 1; i >= 0; i--)
+	for (i = opp_table->regulator_count - 1; i >= 0; i--) {
+		regulator_disable(opp_table->regulators[i]);
 		regulator_put(opp_table->regulators[i]);
+	}
 
 	_free_set_opp_data(opp_table);