| Message ID | 20190722172613.3890-4-wsa+renesas@sang-engineering.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | iio: convert subsystem to i2c_new_dummy_device() | expand |
On Mon, 22 Jul 2019 19:26:13 +0200 Wolfram Sang <wsa+renesas@sang-engineering.com> wrote: > Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an > ERRPTR which we use in error handling. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Applied, thanks. J > --- > > Generated with coccinelle. Build tested by me and buildbot. Not tested on HW. > > drivers/iio/pressure/hp03.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c > index f00102577fd5..026ba15ef68f 100644 > --- a/drivers/iio/pressure/hp03.c > +++ b/drivers/iio/pressure/hp03.c > @@ -243,10 +243,10 @@ static int hp03_probe(struct i2c_client *client, > * which has it's dedicated I2C address and contains > * the calibration constants for the sensor. > */ > - priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR); > - if (!priv->eeprom_client) { > + priv->eeprom_client = i2c_new_dummy_device(client->adapter, HP03_EEPROM_ADDR); > + if (IS_ERR(priv->eeprom_client)) { > dev_err(dev, "New EEPROM I2C device failed\n"); > - return -ENODEV; > + return PTR_ERR(priv->eeprom_client); > } > > priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client,
diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c index f00102577fd5..026ba15ef68f 100644 --- a/drivers/iio/pressure/hp03.c +++ b/drivers/iio/pressure/hp03.c @@ -243,10 +243,10 @@ static int hp03_probe(struct i2c_client *client, * which has it's dedicated I2C address and contains * the calibration constants for the sensor. */ - priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR); - if (!priv->eeprom_client) { + priv->eeprom_client = i2c_new_dummy_device(client->adapter, HP03_EEPROM_ADDR); + if (IS_ERR(priv->eeprom_client)) { dev_err(dev, "New EEPROM I2C device failed\n"); - return -ENODEV; + return PTR_ERR(priv->eeprom_client); } priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client,
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- Generated with coccinelle. Build tested by me and buildbot. Not tested on HW. drivers/iio/pressure/hp03.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)