@@ -234,13 +234,33 @@
interrupt-names = "edma3_tcerrint";
};
- mmc3: mmc@47810000 {
- compatible = "ti,omap4-hsmmc";
+ target-module@47810000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
- ti,needs-special-reset;
- interrupts = <29>;
- reg = <0x47810000 0x1000>;
- status = "disabled";
+ reg = <0x478102fc 0x4>,
+ <0x47810110 0x4>,
+ <0x47810114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47810000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ ti,needs-special-reset;
+ interrupts = <29>;
+ reg = <0x0 0x1000>;
+ };
};
usb: usb@47400000 {
@@ -228,13 +228,33 @@
interrupt-names = "edma3_tcerrint";
};
- mmc3: mmc@47810000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x47810000 0x1000>;
+ target-module@47810000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
- ti,needs-special-reset;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
+ reg = <0x478102fc 0x4>,
+ <0x47810110 0x4>,
+ <0x47810114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47810000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ ti,needs-special-reset;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x1000>;
+ };
};
sham: sham@53100000 {
Commit 4e27f752ab8c ("ARM: OMAP2+: Drop mmc platform data for am330x and am43xx") dropped legacy mmc platform data for am3 and am4, but missed the fact that we never updated the dts files for mmc3 that is directly on l3 interconnect instead of l4 interconnect. This leads to a situation with no legacy platform data and incomplete dts data. Let's update the mmc instances on l3 interconnect to probe properly with ti-sysc interconnect target module driver to make mmc3 work again. Let's still keep legacy "ti,hwmods" property around for v5.2 kernel and only drop it later on. Note that there is no need to use property status = "disabled" for mmc3. The default for dts is enabled, and runtime PM will idle unused instances just fine. Fixes: 4e27f752ab8c ("ARM: OMAP2+: Drop mmc platform data for am330x and am43xx") Reported-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/am33xx.dtsi | 32 ++++++++++++++++++++++++++------ arch/arm/boot/dts/am4372.dtsi | 32 ++++++++++++++++++++++++++------ 2 files changed, 52 insertions(+), 12 deletions(-)