diff mbox series

[1/3] block: umem: rename LED_* macros to LEDCTRL_*

Message ID 1564322446-28255-2-git-send-email-akinobu.mita@gmail.com (mailing list archive)
State Not Applicable
Headers show
Series rename LED_OFF and LED_ON to avoid name collision with leds subsystem | expand

Commit Message

Akinobu Mita July 28, 2019, 2 p.m. UTC
The umem driver defines LED_* macros for MEMCTRLCMD_LEDCTRL register
values.  The LED_OFF and LED_ON macros conflict with the LED subsystem's
LED_OFF and LED_ON enums.

This renames these LED_* macros to LEDCTRL_* in umem driver.

Cc: Frank Steiner <fsteiner-mail1@bio.ifi.lmu.de>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
 drivers/block/umem.c | 20 ++++++++++----------
 drivers/block/umem.h | 20 ++++++++++----------
 2 files changed, 20 insertions(+), 20 deletions(-)

Comments

Jacek Anaszewski July 28, 2019, 5:30 p.m. UTC | #1
Hi Akinobu,

On 7/28/19 4:00 PM, Akinobu Mita wrote:
> The umem driver defines LED_* macros for MEMCTRLCMD_LEDCTRL register
> values.  The LED_OFF and LED_ON macros conflict with the LED subsystem's
> LED_OFF and LED_ON enums.
> 
> This renames these LED_* macros to LEDCTRL_* in umem driver.
[...]
>  
> diff --git a/drivers/block/umem.h b/drivers/block/umem.h
> index 5838497..8563fdc 100644
> --- a/drivers/block/umem.h
> +++ b/drivers/block/umem.h
> @@ -32,16 +32,16 @@
>  #define  MEM_2_GB		0xe0
>  
>  #define MEMCTRLCMD_LEDCTRL	0x08
> -#define  LED_REMOVE		2
> -#define  LED_FAULT		4
> -#define  LED_POWER		6
> -#define	 LED_FLIP		255
> -#define  LED_OFF		0x00
> -#define  LED_ON			0x01
> -#define  LED_FLASH_3_5		0x02
> -#define  LED_FLASH_7_0		0x03
> -#define  LED_POWER_ON		0x00
> -#define  LED_POWER_OFF		0x01
> +#define  LEDCTRL_REMOVE		2

This way the namespacing prefix still begins with "LED",
which can lead to further conflicts in the future.

> +#define  LEDCTRL_FAULT		4
> +#define  LEDCTRL_POWER		6
> +#define	 LEDCTRL_FLIP		255
> +#define  LEDCTRL_OFF		0x00
> +#define  LEDCTRL_ON		0x01
> +#define  LEDCTRL_FLASH_3_5	0x02
> +#define  LEDCTRL_FLASH_7_0	0x03
> +#define  LEDCTRL_POWER_ON	0x00
> +#define  LEDCTRL_POWER_OFF	0x01
>  #define  USER_BIT1		0x01
>  #define  USER_BIT2		0x02
>  
>
Hannes Reinecke July 29, 2019, 9:43 a.m. UTC | #2
On 7/28/19 4:00 PM, Akinobu Mita wrote:
> The umem driver defines LED_* macros for MEMCTRLCMD_LEDCTRL register
> values.  The LED_OFF and LED_ON macros conflict with the LED subsystem's
> LED_OFF and LED_ON enums.
> 
> This renames these LED_* macros to LEDCTRL_* in umem driver.
> 
> Cc: Frank Steiner <fsteiner-mail1@bio.ifi.lmu.de>
> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Dan Murphy <dmurphy@ti.com>
> Cc: Jens Axboe <axboe@kernel.dk>
> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
> Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
> ---
>  drivers/block/umem.c | 20 ++++++++++----------
>  drivers/block/umem.h | 20 ++++++++++----------
>  2 files changed, 20 insertions(+), 20 deletions(-)
> 
Reviewed-by: Hannes Reinecke <hare@suse.com>

Cheers,

Hannes
Akinobu Mita July 29, 2019, 3:21 p.m. UTC | #3
2019年7月29日(月) 2:30 Jacek Anaszewski <jacek.anaszewski@gmail.com>:
>
> Hi Akinobu,
>
> On 7/28/19 4:00 PM, Akinobu Mita wrote:
> > The umem driver defines LED_* macros for MEMCTRLCMD_LEDCTRL register
> > values.  The LED_OFF and LED_ON macros conflict with the LED subsystem's
> > LED_OFF and LED_ON enums.
> >
> > This renames these LED_* macros to LEDCTRL_* in umem driver.
> [...]
> >
> > diff --git a/drivers/block/umem.h b/drivers/block/umem.h
> > index 5838497..8563fdc 100644
> > --- a/drivers/block/umem.h
> > +++ b/drivers/block/umem.h
> > @@ -32,16 +32,16 @@
> >  #define  MEM_2_GB            0xe0
> >
> >  #define MEMCTRLCMD_LEDCTRL   0x08
> > -#define  LED_REMOVE          2
> > -#define  LED_FAULT           4
> > -#define  LED_POWER           6
> > -#define       LED_FLIP               255
> > -#define  LED_OFF             0x00
> > -#define  LED_ON                      0x01
> > -#define  LED_FLASH_3_5               0x02
> > -#define  LED_FLASH_7_0               0x03
> > -#define  LED_POWER_ON                0x00
> > -#define  LED_POWER_OFF               0x01
> > +#define  LEDCTRL_REMOVE              2
>
> This way the namespacing prefix still begins with "LED",
> which can lead to further conflicts in the future.

How about renaming 'LED_ON' to 'MEMCTRLCMD_LEDCTRL_ON', and 'LED_OFF' to
'MEMCTRLCMD_LEDCTRL_OFF' ?
Pavel Machek July 29, 2019, 7:13 p.m. UTC | #4
On Tue 2019-07-30 00:21:14, Akinobu Mita wrote:
> 2019年7月29日(月) 2:30 Jacek Anaszewski <jacek.anaszewski@gmail.com>:
> >
> > Hi Akinobu,
> >
> > On 7/28/19 4:00 PM, Akinobu Mita wrote:
> > > The umem driver defines LED_* macros for MEMCTRLCMD_LEDCTRL register
> > > values.  The LED_OFF and LED_ON macros conflict with the LED subsystem's
> > > LED_OFF and LED_ON enums.
> > >
> > > This renames these LED_* macros to LEDCTRL_* in umem driver.
> > [...]
> > >
> > > diff --git a/drivers/block/umem.h b/drivers/block/umem.h
> > > index 5838497..8563fdc 100644
> > > --- a/drivers/block/umem.h
> > > +++ b/drivers/block/umem.h
> > > @@ -32,16 +32,16 @@
> > >  #define  MEM_2_GB            0xe0
> > >
> > >  #define MEMCTRLCMD_LEDCTRL   0x08
> > > -#define  LED_REMOVE          2
> > > -#define  LED_FAULT           4
> > > -#define  LED_POWER           6
> > > -#define       LED_FLIP               255
> > > -#define  LED_OFF             0x00
> > > -#define  LED_ON                      0x01
> > > -#define  LED_FLASH_3_5               0x02
> > > -#define  LED_FLASH_7_0               0x03
> > > -#define  LED_POWER_ON                0x00
> > > -#define  LED_POWER_OFF               0x01
> > > +#define  LEDCTRL_REMOVE              2
> >
> > This way the namespacing prefix still begins with "LED",
> > which can lead to further conflicts in the future.
> 
> How about renaming 'LED_ON' to 'MEMCTRLCMD_LEDCTRL_ON', and 'LED_OFF' to
> 'MEMCTRLCMD_LEDCTRL_OFF' ?

I'd say that "MEMCTRL_LED_ON" woudl e enough, but... :-).
									Pavel
Jacek Anaszewski July 29, 2019, 7:24 p.m. UTC | #5
On 7/29/19 9:13 PM, Pavel Machek wrote:
> On Tue 2019-07-30 00:21:14, Akinobu Mita wrote:
>> 2019年7月29日(月) 2:30 Jacek Anaszewski <jacek.anaszewski@gmail.com>:
>>>
>>> Hi Akinobu,
>>>
>>> On 7/28/19 4:00 PM, Akinobu Mita wrote:
>>>> The umem driver defines LED_* macros for MEMCTRLCMD_LEDCTRL register
>>>> values.  The LED_OFF and LED_ON macros conflict with the LED subsystem's
>>>> LED_OFF and LED_ON enums.
>>>>
>>>> This renames these LED_* macros to LEDCTRL_* in umem driver.
>>> [...]
>>>>
>>>> diff --git a/drivers/block/umem.h b/drivers/block/umem.h
>>>> index 5838497..8563fdc 100644
>>>> --- a/drivers/block/umem.h
>>>> +++ b/drivers/block/umem.h
>>>> @@ -32,16 +32,16 @@
>>>>  #define  MEM_2_GB            0xe0
>>>>
>>>>  #define MEMCTRLCMD_LEDCTRL   0x08
>>>> -#define  LED_REMOVE          2
>>>> -#define  LED_FAULT           4
>>>> -#define  LED_POWER           6
>>>> -#define       LED_FLIP               255
>>>> -#define  LED_OFF             0x00
>>>> -#define  LED_ON                      0x01
>>>> -#define  LED_FLASH_3_5               0x02
>>>> -#define  LED_FLASH_7_0               0x03
>>>> -#define  LED_POWER_ON                0x00
>>>> -#define  LED_POWER_OFF               0x01
>>>> +#define  LEDCTRL_REMOVE              2
>>>
>>> This way the namespacing prefix still begins with "LED",
>>> which can lead to further conflicts in the future.
>>
>> How about renaming 'LED_ON' to 'MEMCTRLCMD_LEDCTRL_ON', and 'LED_OFF' to
>> 'MEMCTRLCMD_LEDCTRL_OFF' ?
> 
> I'd say that "MEMCTRL_LED_ON" woudl e enough, but... :-).

I agree, it looks neater.
diff mbox series

Patch

diff --git a/drivers/block/umem.c b/drivers/block/umem.c
index 1f3f9e0..ea63c14 100644
--- a/drivers/block/umem.c
+++ b/drivers/block/umem.c
@@ -167,14 +167,14 @@  static int set_userbit(struct cardinfo *card, int bit, unsigned char state)
 }
 
 /*
- * NOTE: For the power LED, use the LED_POWER_* macros since they differ
+ * NOTE: For the power LED, use the LEDCTRL_POWER_* macros since they differ
  */
 static void set_led(struct cardinfo *card, int shift, unsigned char state)
 {
 	unsigned char led;
 
 	led = readb(card->csr_remap + MEMCTRLCMD_LEDCTRL);
-	if (state == LED_FLIP)
+	if (state == LEDCTRL_FLIP)
 		led ^= (1<<shift);
 	else {
 		led &= ~(0x03 << shift);
@@ -268,7 +268,7 @@  static void mm_start_io(struct cardinfo *card)
 
 
 	if (debug & DEBUG_LED_ON_TRANSFER)
-		set_led(card, LED_REMOVE, LED_ON);
+		set_led(card, LEDCTRL_REMOVE, LEDCTRL_ON);
 
 	desc = &page->desc[page->headcnt];
 	writel(0, card->csr_remap + DMA_PCI_ADDR);
@@ -477,7 +477,7 @@  static void process_page(unsigned long data)
 	}
 
 	if (debug & DEBUG_LED_ON_TRANSFER)
-		set_led(card, LED_REMOVE, LED_OFF);
+		set_led(card, LEDCTRL_REMOVE, LEDCTRL_OFF);
 
 	if (card->check_batteries) {
 		card->check_batteries = 0;
@@ -652,13 +652,13 @@  HW_TRACE(0x36);
 static void set_fault_to_battery_status(struct cardinfo *card)
 {
 	if (card->battery[0].good && card->battery[1].good)
-		set_led(card, LED_FAULT, LED_OFF);
+		set_led(card, LEDCTRL_FAULT, LEDCTRL_OFF);
 	else if (card->battery[0].warned || card->battery[1].warned)
-		set_led(card, LED_FAULT, LED_ON);
+		set_led(card, LEDCTRL_FAULT, LEDCTRL_ON);
 	else if (!card->battery[0].good && !card->battery[1].good)
-		set_led(card, LED_FAULT, LED_FLASH_7_0);
+		set_led(card, LEDCTRL_FAULT, LEDCTRL_FLASH_7_0);
 	else
-		set_led(card, LED_FAULT, LED_FLASH_3_5);
+		set_led(card, LEDCTRL_FAULT, LEDCTRL_FLASH_3_5);
 }
 
 static void init_battery_timer(void);
@@ -919,8 +919,8 @@  static int mm_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	/* Clear the LED's we control */
-	set_led(card, LED_REMOVE, LED_OFF);
-	set_led(card, LED_FAULT, LED_OFF);
+	set_led(card, LEDCTRL_REMOVE, LEDCTRL_OFF);
+	set_led(card, LEDCTRL_FAULT, LEDCTRL_OFF);
 
 	batt_status = readb(card->csr_remap + MEMCTRLSTATUS_BATTERY);
 
diff --git a/drivers/block/umem.h b/drivers/block/umem.h
index 5838497..8563fdc 100644
--- a/drivers/block/umem.h
+++ b/drivers/block/umem.h
@@ -32,16 +32,16 @@ 
 #define  MEM_2_GB		0xe0
 
 #define MEMCTRLCMD_LEDCTRL	0x08
-#define  LED_REMOVE		2
-#define  LED_FAULT		4
-#define  LED_POWER		6
-#define	 LED_FLIP		255
-#define  LED_OFF		0x00
-#define  LED_ON			0x01
-#define  LED_FLASH_3_5		0x02
-#define  LED_FLASH_7_0		0x03
-#define  LED_POWER_ON		0x00
-#define  LED_POWER_OFF		0x01
+#define  LEDCTRL_REMOVE		2
+#define  LEDCTRL_FAULT		4
+#define  LEDCTRL_POWER		6
+#define	 LEDCTRL_FLIP		255
+#define  LEDCTRL_OFF		0x00
+#define  LEDCTRL_ON		0x01
+#define  LEDCTRL_FLASH_3_5	0x02
+#define  LEDCTRL_FLASH_7_0	0x03
+#define  LEDCTRL_POWER_ON	0x00
+#define  LEDCTRL_POWER_OFF	0x01
 #define  USER_BIT1		0x01
 #define  USER_BIT2		0x02