[v2,3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs
diff mbox series

Message ID 930dffcdf5fa9c398c34a3c25a39e65fbd8ae836.1564427804.git.lorenzo@kernel.org
State New
Headers show
Series
  • st_lsm6dsx: move {odr,fs}_table in
Related show

Commit Message

Lorenzo Bianconi July 29, 2019, 7:22 p.m. UTC
Remove output register definition and inline register value since
they are used only for iio channel definition. This is a preliminary
patch to add support for LSM9DS1 sensor to st_lsm6dsx driver

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 +++++---------------
 1 file changed, 6 insertions(+), 20 deletions(-)

Comments

Martin Kepplinger Aug. 2, 2019, 5:35 a.m. UTC | #1
On 29.07.19 21:22, Lorenzo Bianconi wrote:
> Remove output register definition and inline register value since
> they are used only for iio channel definition. This is a preliminary
> patch to add support for LSM9DS1 sensor to st_lsm6dsx driver
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 +++++---------------
>  1 file changed, 6 insertions(+), 20 deletions(-)
> 

thanks. I'm running this patchset now and will resend LSM9DS1 patches
after these are merged.

Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Jonathan Cameron Aug. 5, 2019, 2:18 p.m. UTC | #2
On Fri, 2 Aug 2019 07:35:46 +0200
Martin Kepplinger <martin.kepplinger@puri.sm> wrote:

> On 29.07.19 21:22, Lorenzo Bianconi wrote:
> > Remove output register definition and inline register value since
> > they are used only for iio channel definition. This is a preliminary
> > patch to add support for LSM9DS1 sensor to st_lsm6dsx driver
> > 
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > ---
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 +++++---------------
> >  1 file changed, 6 insertions(+), 20 deletions(-)
> >   
> 
> thanks. I'm running this patchset now and will resend LSM9DS1 patches
> after these are merged.
> 
> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> 

Nice little tidy up. Applied.

Thanks,

Jonathan

Patch
diff mbox series

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 9aa109428a52..0abd5b85b398 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -61,14 +61,6 @@ 
 #define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR	0x13
 #define ST_LSM6DSX_REG_INT2_ON_INT1_MASK	BIT(5)
 
-#define ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR		0x28
-#define ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR		0x2a
-#define ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR		0x2c
-
-#define ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR	0x22
-#define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR	0x24
-#define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR	0x26
-
 static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 	{
 		.wai = 0x69,
@@ -701,22 +693,16 @@  static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 };
 
 static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR,
-			   IIO_MOD_X, 0),
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR,
-			   IIO_MOD_Y, 1),
-	ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR,
-			   IIO_MOD_Z, 2),
+	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
 static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
-	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR,
-			   IIO_MOD_X, 0),
-	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR,
-			   IIO_MOD_Y, 1),
-	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR,
-			   IIO_MOD_Z, 2),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x22, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x24, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x26, IIO_MOD_Z, 2),
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };