diff mbox series

[v3,1/2] dt-bindings: mmc: Document Aspeed SD controller

Message ID 20190730062316.32037-2-andrew@aj.id.au (mailing list archive)
State New, archived
Headers show
Series mmc: Add support for the ASPEED SD controller | expand

Commit Message

Andrew Jeffery July 30, 2019, 6:23 a.m. UTC
The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the
SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
data bus if only a single slot is enabled.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

---
v3:
* Fix compatible enums
* Add AST2600 compatibles
* Describe #address-cells / #size-cells
---
 .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 100 ++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml

Comments

Rob Herring Aug. 1, 2019, 10:59 p.m. UTC | #1
On Tue, Jul 30, 2019 at 12:23 AM Andrew Jeffery <andrew@aj.id.au> wrote:
>
> The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the
> SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
> data bus if only a single slot is enabled.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
>
> ---
> v3:
> * Fix compatible enums
> * Add AST2600 compatibles
> * Describe #address-cells / #size-cells
> ---
>  .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 100 ++++++++++++++++++
>  1 file changed, 100 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
>
> diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> new file mode 100644
> index 000000000000..dd2a00c59641
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> @@ -0,0 +1,100 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED SD/SDIO/eMMC Controller
> +
> +maintainers:
> +  - Andrew Jeffery <andrew@aj.id.au>
> +  - Ryan Chen <ryanchen.aspeed@gmail.com>
> +
> +description: |+
> +  The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
> +  Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
> +  only a single slot is enabled.
> +
> +  The two slots are supported by a common configuration area. As the SDHCIs for
> +  the slots are dependent on the common configuration area, they are described
> +  as child nodes.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2400-sd-controller
> +      - aspeed,ast2500-sd-controller
> +      - aspeed,ast2600-sd-controller
> +  reg:
> +    maxItems: 1
> +    description: Common configuration registers
> +  "#address-cells":
> +    const: 1
> +  "#size-cells":
> +    const: 1
> +  ranges: true
> +  clocks:
> +    maxItems: 1
> +    description: The SD/SDIO controller clock gate
> +
> +patternProperties:
> +  "^sdhci@[0-9a-f]+$":

This should probably have:

allOf:
  - $ref: mmc-controller.yaml

Another new thing in 5.3. :)

> +    type: object
> +    properties:
> +      compatible:
> +        enum:
> +          - aspeed,ast2400-sdhci
> +          - aspeed,ast2500-sdhci
> +          - aspeed,ast2600-sdhci
> +      reg:
> +        maxItems: 1
> +        description: The SDHCI registers
> +      clocks:
> +        maxItems: 1
> +        description: The SD bus clock
> +      interrupts:
> +        maxItems: 1
> +        description: The SD interrupt shared between both slots
> +    required:
> +      - compatible
> +      - reg
> +      - clocks
> +      - interrupts
> +
> +additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +  - clocks
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    sdc@1e740000 {
> +            compatible = "aspeed,ast2500-sd-controller";
> +            reg = <0x1e740000 0x100>;
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            ranges = <0 0x1e740000 0x10000>;
> +            clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
> +
> +            sdhci0: sdhci@100 {
> +                    compatible = "aspeed,ast2500-sdhci";
> +                    reg = <0x100 0x100>;
> +                    interrupts = <26>;
> +                    sdhci,auto-cmd12;

Not documented. Maybe should be common, but there's only a few users.

> +                    clocks = <&syscon ASPEED_CLK_SDIO>;
> +            };
> +
> +            sdhci1: sdhci@200 {
> +                    compatible = "aspeed,ast2500-sdhci";
> +                    reg = <0x200 0x100>;
> +                    interrupts = <26>;
> +                    sdhci,auto-cmd12;
> +                    clocks = <&syscon ASPEED_CLK_SDIO>;
> +            };
> +    };
> --
> 2.20.1
>
Andrew Jeffery Aug. 5, 2019, 2:10 a.m. UTC | #2
On Fri, 2 Aug 2019, at 08:29, Rob Herring wrote:
> On Tue, Jul 30, 2019 at 12:23 AM Andrew Jeffery <andrew@aj.id.au> wrote:
> >
> > The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the
> > SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
> > data bus if only a single slot is enabled.
> >
> > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> >
> > ---
> > v3:
> > * Fix compatible enums
> > * Add AST2600 compatibles
> > * Describe #address-cells / #size-cells
> > ---
> >  .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 100 ++++++++++++++++++
> >  1 file changed, 100 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> > new file mode 100644
> > index 000000000000..dd2a00c59641
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> > @@ -0,0 +1,100 @@
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ASPEED SD/SDIO/eMMC Controller
> > +
> > +maintainers:
> > +  - Andrew Jeffery <andrew@aj.id.au>
> > +  - Ryan Chen <ryanchen.aspeed@gmail.com>
> > +
> > +description: |+
> > +  The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
> > +  Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
> > +  only a single slot is enabled.
> > +
> > +  The two slots are supported by a common configuration area. As the SDHCIs for
> > +  the slots are dependent on the common configuration area, they are described
> > +  as child nodes.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - aspeed,ast2400-sd-controller
> > +      - aspeed,ast2500-sd-controller
> > +      - aspeed,ast2600-sd-controller
> > +  reg:
> > +    maxItems: 1
> > +    description: Common configuration registers
> > +  "#address-cells":
> > +    const: 1
> > +  "#size-cells":
> > +    const: 1
> > +  ranges: true
> > +  clocks:
> > +    maxItems: 1
> > +    description: The SD/SDIO controller clock gate
> > +
> > +patternProperties:
> > +  "^sdhci@[0-9a-f]+$":
> 
> This should probably have:
> 
> allOf:
>   - $ref: mmc-controller.yaml
> 
> Another new thing in 5.3. :)

Ack.

> 
> > +    type: object
> > +    properties:
> > +      compatible:
> > +        enum:
> > +          - aspeed,ast2400-sdhci
> > +          - aspeed,ast2500-sdhci
> > +          - aspeed,ast2600-sdhci
> > +      reg:
> > +        maxItems: 1
> > +        description: The SDHCI registers
> > +      clocks:
> > +        maxItems: 1
> > +        description: The SD bus clock
> > +      interrupts:
> > +        maxItems: 1
> > +        description: The SD interrupt shared between both slots
> > +    required:
> > +      - compatible
> > +      - reg
> > +      - clocks
> > +      - interrupts
> > +
> > +additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +  - ranges
> > +  - clocks
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/aspeed-clock.h>
> > +    sdc@1e740000 {
> > +            compatible = "aspeed,ast2500-sd-controller";
> > +            reg = <0x1e740000 0x100>;
> > +            #address-cells = <1>;
> > +            #size-cells = <1>;
> > +            ranges = <0 0x1e740000 0x10000>;
> > +            clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
> > +
> > +            sdhci0: sdhci@100 {
> > +                    compatible = "aspeed,ast2500-sdhci";
> > +                    reg = <0x100 0x100>;
> > +                    interrupts = <26>;
> > +                    sdhci,auto-cmd12;
> 
> Not documented. Maybe should be common, but there's only a few users.

I'll document it locally for the moment.

Cheers,

Andrew
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
new file mode 100644
index 000000000000..dd2a00c59641
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -0,0 +1,100 @@ 
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED SD/SDIO/eMMC Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+  - Ryan Chen <ryanchen.aspeed@gmail.com>
+
+description: |+
+  The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
+  Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
+  only a single slot is enabled.
+
+  The two slots are supported by a common configuration area. As the SDHCIs for
+  the slots are dependent on the common configuration area, they are described
+  as child nodes.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-sd-controller
+      - aspeed,ast2500-sd-controller
+      - aspeed,ast2600-sd-controller
+  reg:
+    maxItems: 1
+    description: Common configuration registers
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 1
+  ranges: true
+  clocks:
+    maxItems: 1
+    description: The SD/SDIO controller clock gate
+
+patternProperties:
+  "^sdhci@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - aspeed,ast2400-sdhci
+          - aspeed,ast2500-sdhci
+          - aspeed,ast2600-sdhci
+      reg:
+        maxItems: 1
+        description: The SDHCI registers
+      clocks:
+        maxItems: 1
+        description: The SD bus clock
+      interrupts:
+        maxItems: 1
+        description: The SD interrupt shared between both slots
+    required:
+      - compatible
+      - reg
+      - clocks
+      - interrupts
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    sdc@1e740000 {
+            compatible = "aspeed,ast2500-sd-controller";
+            reg = <0x1e740000 0x100>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x1e740000 0x10000>;
+            clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+
+            sdhci0: sdhci@100 {
+                    compatible = "aspeed,ast2500-sdhci";
+                    reg = <0x100 0x100>;
+                    interrupts = <26>;
+                    sdhci,auto-cmd12;
+                    clocks = <&syscon ASPEED_CLK_SDIO>;
+            };
+
+            sdhci1: sdhci@200 {
+                    compatible = "aspeed,ast2500-sdhci";
+                    reg = <0x200 0x100>;
+                    interrupts = <26>;
+                    sdhci,auto-cmd12;
+                    clocks = <&syscon ASPEED_CLK_SDIO>;
+            };
+    };