diff mbox series

[v16,2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings

Message ID 1564539258-16313-3-git-send-email-masonccyang@mxic.com.tw (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series spi: Add Renesas R-Car Gen3 RPC-IF SPI driver | expand

Commit Message

Mason Yang July 31, 2019, 2:14 a.m. UTC
Document the bindings used by the Renesas R-Car Gen3 RPC-IF controller.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/spi/spi-renesas-rpc.txt    | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
new file mode 100644
index 0000000..d4344c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
@@ -0,0 +1,45 @@ 
+Renesas R-Car Gen3 RPC-IF controller Device Tree Bindings
+---------------------------------------------------------
+
+Required properties:
+- compatible: should be an SoC-specific compatible value, followed by
+		"renesas,rcar-gen3-rpc" as a fallback.
+		supported SoC-specific values are:
+		"renesas,r8a77980-rpc"	(R-Car V3H)
+		"renesas,r8a77995-rpc"	(R-Car D3)
+- reg: should contain three register areas:
+       first for the base address of RPC-IF registers,
+       second for the direct mapping read mode and
+       third for the write buffer area.
+- reg-names: should contain "regs", "dirmap" and "wbuf"
+- clocks: should contain the clock phandle/specifier pair for the module clock.
+- clock-names: should contain "rpc"
+- power-domains: should contain the power domain phandle/secifier pair.
+- resets: should contain the reset controller phandle/specifier pair.
+- #address-cells: should be 1
+- #size-cells: should be 0
+- flash: should be represented by a subnode of the RPC-IF node,
+	 its "compatible" property contains "jedec,spi-nor" if SPI is used.
+
+Example:
+
+	rpc: spi@ee200000 {
+		compatible = "renesas,r8a77995-rpc", "renesas,rcar-gen3-rpc";
+		reg = <0 0xee200000 0 0x200>, <0 0x08000000 0 0x4000000>,
+		      <0 0xee208000 0 0x100>;
+		reg-names = "regs", "dirmap", "wbuf";
+		clocks = <&cpg CPG_MOD 917>;
+		clock-names = "rpc";
+		power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+		resets = <&cpg 917>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+			spi-tx-bus-width = <4>;
+			spi-rx-bus-width = <4>;
+		};
+	};