phy: qcom-qmp: Correct ready status, again
diff mbox series

Message ID 20190806004256.20152-1-bjorn.andersson@linaro.org
State New
Headers show
Series
  • phy: qcom-qmp: Correct ready status, again
Related show

Commit Message

Bjorn Andersson Aug. 6, 2019, 12:42 a.m. UTC
Despite extensive testing of 885bd765963b ("phy: qcom-qmp: Correct
READY_STATUS poll break condition") I failed to conclude that the
PHYSTATUS bit of the PCS_STATUS register used in PCIe and USB3 falls as
the PHY gets ready. Similar to the prior bug with UFS the code will
generally get past the check before the transition and thereby
"succeed".

Correct the name of the register used PCIe and USB3 PHYs, replace
mask_pcs_ready with a constant expression depending on the type of the
PHY and check for the appropriate ready state.

Cc: stable@vger.kernel.org
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Reported-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Fixes: 885bd765963b ("phy: qcom-qmp: Correct READY_STATUS poll break condition")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 33 ++++++++++++++---------------
 1 file changed, 16 insertions(+), 17 deletions(-)

Patch
diff mbox series

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 34ff6434da8f..6bb49cc25c63 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -35,7 +35,7 @@ 
 #define PLL_READY_GATE_EN			BIT(3)
 /* QPHY_PCS_STATUS bit */
 #define PHYSTATUS				BIT(6)
-/* QPHY_COM_PCS_READY_STATUS bit */
+/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
 #define PCS_READY				BIT(0)
 
 /* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
@@ -115,6 +115,7 @@  enum qphy_reg_layout {
 	QPHY_SW_RESET,
 	QPHY_START_CTRL,
 	QPHY_PCS_READY_STATUS,
+	QPHY_PCS_STATUS,
 	QPHY_PCS_AUTONOMOUS_MODE_CTRL,
 	QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
 	QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
@@ -133,7 +134,7 @@  static const unsigned int pciephy_regs_layout[] = {
 	[QPHY_FLL_MAN_CODE]		= 0xd4,
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_READY_STATUS]		= 0x174,
+	[QPHY_PCS_STATUS]		= 0x174,
 };
 
 static const unsigned int usb3phy_regs_layout[] = {
@@ -144,7 +145,7 @@  static const unsigned int usb3phy_regs_layout[] = {
 	[QPHY_FLL_MAN_CODE]		= 0xd0,
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_READY_STATUS]		= 0x17c,
+	[QPHY_PCS_STATUS]		= 0x17c,
 	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d4,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0d8,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
@@ -153,7 +154,7 @@  static const unsigned int usb3phy_regs_layout[] = {
 static const unsigned int qmp_v3_usb3phy_regs_layout[] = {
 	[QPHY_SW_RESET]			= 0x00,
 	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_READY_STATUS]		= 0x174,
+	[QPHY_PCS_STATUS]		= 0x174,
 	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d8,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0dc,
 	[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
@@ -911,7 +912,6 @@  struct qmp_phy_cfg {
 
 	unsigned int start_ctrl;
 	unsigned int pwrdn_ctrl;
-	unsigned int mask_pcs_ready;
 	unsigned int mask_com_pcs_ready;
 
 	/* true, if PHY has a separate PHY_COM control block */
@@ -1074,7 +1074,6 @@  static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
 
 	.start_ctrl		= PCS_START | PLL_READY_GATE_EN,
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
-	.mask_pcs_ready		= PHYSTATUS,
 	.mask_com_pcs_ready	= PCS_READY,
 
 	.has_phy_com_ctrl	= true,
@@ -1106,7 +1105,6 @@  static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
-	.mask_pcs_ready		= PHYSTATUS,
 };
 
 /* list of resets */
@@ -1136,7 +1134,6 @@  static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
-	.mask_pcs_ready		= PHYSTATUS,
 
 	.has_phy_com_ctrl	= false,
 	.has_lane_rst		= false,
@@ -1167,7 +1164,6 @@  static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
-	.mask_pcs_ready		= PHYSTATUS,
 
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
@@ -1199,7 +1195,6 @@  static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,
-	.mask_pcs_ready		= PHYSTATUS,
 
 	.has_pwrdn_delay	= true,
 	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
@@ -1226,7 +1221,6 @@  static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
 
 	.start_ctrl		= SERDES_START,
 	.pwrdn_ctrl		= SW_PWRDN,
-	.mask_pcs_ready		= PCS_READY,
 
 	.is_dual_lane_phy	= true,
 	.no_pcs_sw_reset	= true,
@@ -1254,7 +1248,6 @@  static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
 
 	.start_ctrl             = SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
-	.mask_pcs_ready		= PHYSTATUS,
 };
 
 static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
@@ -1279,7 +1272,6 @@  static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
 
 	.start_ctrl             = SERDES_START | PCS_START,
 	.pwrdn_ctrl             = SW_PWRDN,
-	.mask_pcs_ready         = PHYSTATUS,
 
 	.is_dual_lane_phy       = true,
 };
@@ -1457,7 +1449,7 @@  static int qcom_qmp_phy_enable(struct phy *phy)
 	void __iomem *pcs = qphy->pcs;
 	void __iomem *dp_com = qmp->dp_com;
 	void __iomem *status;
-	unsigned int mask, val;
+	unsigned int mask, val, ready;
 	int ret;
 
 	dev_vdbg(qmp->dev, "Initializing QMP phy\n");
@@ -1545,10 +1537,17 @@  static int qcom_qmp_phy_enable(struct phy *phy)
 	/* start SerDes and Phy-Coding-Sublayer */
 	qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
 
-	status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
-	mask = cfg->mask_pcs_ready;
+	if (cfg->type == PHY_TYPE_UFS) {
+		status = pcs + cfg->regs[QPHY_PCS_READY_STATUS];
+		mask = PCS_READY;
+		ready = PCS_READY;
+	} else {
+		status = pcs + cfg->regs[QPHY_PCS_STATUS];
+		mask = PHYSTATUS;
+		ready = 0;
+	}
 
-	ret = readl_poll_timeout(status, val, val & mask, 10,
+	ret = readl_poll_timeout(status, val, (val & mask) == ready, 10,
 				 PHY_INIT_COMPLETE_TIMEOUT);
 	if (ret) {
 		dev_err(qmp->dev, "phy initialization timed-out\n");