| Message ID | bcbab490489ef5143361048db93752741b38e379.1565081126.git.leonard.crestez@nxp.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | PM / devfreq: Add dev_pm_qos support | expand |
On 06-08-19, 12:03, Leonard Crestez wrote: > Add dev_pm_qos notifies to devfreq core in order to support frequency > limits via dev_pm_qos_add_request and related APIs > > Unlike the rest of devfreq the dev_pm_qos frequency is measured kHz: > this is consistent with current dev_pm_qos usage for cpufreq and allows > frequencies above 2Ghz. > > Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> > --- > drivers/devfreq/devfreq.c | 77 ++++++++++++++++++++++++++++++++++----- > include/linux/devfreq.h | 3 ++ > 2 files changed, 71 insertions(+), 9 deletions(-) > > This was inspired by recent changes adding dev_pm_qos limits for > cpufreq: https://lkml.org/lkml/2019/7/4/118 > > The pm_qos code make deep assumptions that requests need to be > expressed as "s32" through it's use of "plist". Handling freq as a kHz > values seems the easiest solution for this, perhaps it should be > documented in dev_pm_qos itself? > > diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c > index 784c08e4f931..de9e825ae1f4 100644 > --- a/drivers/devfreq/devfreq.c > +++ b/drivers/devfreq/devfreq.c > @@ -22,10 +22,11 @@ > #include <linux/platform_device.h> > #include <linux/list.h> > #include <linux/printk.h> > #include <linux/hrtimer.h> > #include <linux/of.h> > +#include <linux/pm_qos.h> > #include "governor.h" > > #define CREATE_TRACE_POINTS > #include <trace/events/devfreq.h> > > @@ -96,10 +97,26 @@ static unsigned long find_available_max_freq(struct devfreq *devfreq) > dev_pm_opp_put(opp); > > return max_freq; > } > > +static unsigned long get_effective_min_freq(struct devfreq *devfreq) > +{ > + return max3(devfreq->scaling_min_freq, devfreq->min_freq, > + 1000 * (unsigned long)dev_pm_qos_read_value( > + devfreq->dev.parent, > + DEV_PM_QOS_MIN_FREQUENCY)); > +} > + > +static unsigned long get_effective_max_freq(struct devfreq *devfreq) > +{ > + return min3(devfreq->scaling_max_freq, devfreq->max_freq, > + 1000 * (unsigned long)dev_pm_qos_read_value( > + devfreq->dev.parent, > + DEV_PM_QOS_MAX_FREQUENCY)); > +} > + > /** > * devfreq_get_freq_level() - Lookup freq_table for the frequency > * @devfreq: the devfreq instance > * @freq: the target frequency > */ > @@ -356,12 +373,12 @@ int update_devfreq(struct devfreq *devfreq) > * > * List from the highest priority > * max_freq > * min_freq > */ > - max_freq = min(devfreq->scaling_max_freq, devfreq->max_freq); > - min_freq = max(devfreq->scaling_min_freq, devfreq->min_freq); > + max_freq = get_effective_max_freq(devfreq); > + min_freq = get_effective_min_freq(devfreq); > > if (freq < min_freq) { > freq = min_freq; > flags &= ~DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use GLB */ > } > @@ -570,10 +587,31 @@ static int devfreq_notifier_call(struct notifier_block *nb, unsigned long type, > mutex_unlock(&devfreq->lock); > > return ret; > } > > +static int devfreq_qos_notifier_call(struct devfreq *devfreq) > +{ > + int ret; > + > + mutex_lock(&devfreq->lock); > + ret = update_devfreq(devfreq); > + mutex_unlock(&devfreq->lock); > + > + return ret; > +} > + > +static int devfreq_qos_min_notifier_call(struct notifier_block *nb, unsigned long type, void *devp) > +{ > + return devfreq_qos_notifier_call(container_of(nb, struct devfreq, nb_min)); > +} > + > +static int devfreq_qos_max_notifier_call(struct notifier_block *nb, unsigned long type, void *devp) > +{ > + return devfreq_qos_notifier_call(container_of(nb, struct devfreq, nb_max)); > +} > + > /** > * devfreq_dev_release() - Callback for struct device to release the device. > * @dev: the devfreq device > * > * Remove devfreq from the list and release its resources. > @@ -636,21 +674,46 @@ struct devfreq *devfreq_add_device(struct device *dev, > err = -ENOMEM; > goto err_out; > } > > mutex_init(&devfreq->lock); > - mutex_lock(&devfreq->lock); > devfreq->dev.parent = dev; > devfreq->dev.class = devfreq_class; > devfreq->dev.release = devfreq_dev_release; > devfreq->profile = profile; > strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN); > devfreq->previous_freq = profile->initial_freq; > devfreq->last_status.current_frequency = profile->initial_freq; > devfreq->data = data; > devfreq->nb.notifier_call = devfreq_notifier_call; > > + /* > + * notifier from pm_qos > + * > + * initialized outside of devfreq->lock to avoid circular warning > + * between devfreq->lock and dev_pm_qos_mtx > + */ > + devfreq->nb_min.notifier_call = devfreq_qos_min_notifier_call; > + devfreq->nb_max.notifier_call = devfreq_qos_max_notifier_call; > + > + err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_min, > + DEV_PM_QOS_MIN_FREQUENCY); > + if (err) { > + dev_err(dev, "Failed to register MIN QoS notifier: %d\n", err); > + panic("fail\n"); > + goto err_dev; > + } > + > + err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_max, > + DEV_PM_QOS_MAX_FREQUENCY); > + if (err) { > + dev_err(dev, "Failed to register MAX QoS notifier: %d\n", err); What about removing the earlier notifier ? > + panic("fail\n"); > + goto err_dev; > + } > + I don't see you removing the notifiers anywhere, don't you need to do that when the devices goes away ?
>Add dev_pm_qos notifies to devfreq core in order to support frequency >limits via dev_pm_qos_add_request and related APIs > >Unlike the rest of devfreq the dev_pm_qos frequency is measured kHz: >this is consistent with current dev_pm_qos usage for cpufreq and allows >frequencies above 2Ghz. > >Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [] >diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c >index 784c08e4f931..de9e825ae1f4 100644 >--- a/drivers/devfreq/devfreq.c >+++ b/drivers/devfreq/devfreq.c [] >+ /* >+ * notifier from pm_qos >+ * >+ * initialized outside of devfreq->lock to avoid circular warning >+ * between devfreq->lock and dev_pm_qos_mtx >+ */ >+ devfreq->nb_min.notifier_call = devfreq_qos_min_notifier_call; >+ devfreq->nb_max.notifier_call = devfreq_qos_max_notifier_call; >+ >+ err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_min, >+ DEV_PM_QOS_MIN_FREQUENCY); >+ if (err) { >+ dev_err(dev, "Failed to register MIN QoS notifier: %d\n", err); >+ panic("fail\n"); >+ goto err_dev; >+ } >+ >+ err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_max, >+ DEV_PM_QOS_MAX_FREQUENCY); >+ if (err) { >+ dev_err(dev, "Failed to register MAX QoS notifier: %d\n", err); >+ panic("fail\n"); >+ goto err_dev; >+ } Do you really need to have two notifier blocks? Wouldn't it be sufficient to register the same notifier block for both types? [] >diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h >index 2bae9ed3c783..939cb025d2aa 100644 >--- a/include/linux/devfreq.h >+++ b/include/linux/devfreq.h >@@ -176,10 +176,13 @@ struct devfreq { > unsigned int *trans_table; > unsigned long *time_in_state; > unsigned long last_stat_updated; > > struct srcu_notifier_head transition_notifier_list; >+ >+ struct notifier_block nb_min; >+ struct notifier_block nb_max; Need Doxygen entries. > }; > > struct devfreq_freqs { > unsigned long old; > unsigned long new; Cheers, MyungJoo
On 07.08.2019 11:07, MyungJoo Ham wrote: >> Add dev_pm_qos notifies to devfreq core in order to support frequency >> limits via dev_pm_qos_add_request and related APIs >> >> Unlike the rest of devfreq the dev_pm_qos frequency is measured kHz: >> this is consistent with current dev_pm_qos usage for cpufreq and allows >> frequencies above 2Ghz. >> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c >> + /* >> + * notifier from pm_qos >> + * >> + * initialized outside of devfreq->lock to avoid circular warning >> + * between devfreq->lock and dev_pm_qos_mtx >> + */ >> + devfreq->nb_min.notifier_call = devfreq_qos_min_notifier_call; >> + devfreq->nb_max.notifier_call = devfreq_qos_max_notifier_call; >> + >> + err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_min, >> + DEV_PM_QOS_MIN_FREQUENCY); >> + if (err) { >> + dev_err(dev, "Failed to register MIN QoS notifier: %d\n", err); >> + panic("fail\n"); >> + goto err_dev; >> + } >> + >> + err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_max, >> + DEV_PM_QOS_MAX_FREQUENCY); >> + if (err) { >> + dev_err(dev, "Failed to register MAX QoS notifier: %d\n", err); >> + panic("fail\n"); >> + goto err_dev; >> + } > > Do you really need to have two notifier blocks? > Wouldn't it be sufficient to register the same notifier block for both types? Can't register the same notifier block twice, struct notifier_block serves as a node in a linked list and there are two lists we need to add to. Two notifier_call functions are also required because container_of is the only way to get back to the devfreq instance. >> diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h >> >> struct srcu_notifier_head transition_notifier_list; >> + >> + struct notifier_block nb_min; >> + struct notifier_block nb_max; > > Need Doxygen entries. OK
On Tue, Aug 6, 2019 at 2:03 AM Leonard Crestez <leonard.crestez@nxp.com> wrote: > > Add dev_pm_qos notifies to devfreq core in order to support frequency > limits via dev_pm_qos_add_request and related APIs > > Unlike the rest of devfreq the dev_pm_qos frequency is measured kHz: > this is consistent with current dev_pm_qos usage for cpufreq and allows > frequencies above 2Ghz. > > Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> > --- > drivers/devfreq/devfreq.c | 77 ++++++++++++++++++++++++++++++++++----- > include/linux/devfreq.h | 3 ++ > 2 files changed, 71 insertions(+), 9 deletions(-) > > This was inspired by recent changes adding dev_pm_qos limits for > cpufreq: https://lkml.org/lkml/2019/7/4/118 > > The pm_qos code make deep assumptions that requests need to be > expressed as "s32" through it's use of "plist". Handling freq as a kHz > values seems the easiest solution for this, perhaps it should be > documented in dev_pm_qos itself? > > diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c > index 784c08e4f931..de9e825ae1f4 100644 > --- a/drivers/devfreq/devfreq.c > +++ b/drivers/devfreq/devfreq.c > @@ -22,10 +22,11 @@ > #include <linux/platform_device.h> > #include <linux/list.h> > #include <linux/printk.h> > #include <linux/hrtimer.h> > #include <linux/of.h> > +#include <linux/pm_qos.h> > #include "governor.h" > > #define CREATE_TRACE_POINTS > #include <trace/events/devfreq.h> > > @@ -96,10 +97,26 @@ static unsigned long find_available_max_freq(struct devfreq *devfreq) > dev_pm_opp_put(opp); > > return max_freq; > } > > +static unsigned long get_effective_min_freq(struct devfreq *devfreq) > +{ > + return max3(devfreq->scaling_min_freq, devfreq->min_freq, > + 1000 * (unsigned long)dev_pm_qos_read_value( > + devfreq->dev.parent, > + DEV_PM_QOS_MIN_FREQUENCY)); > +} > + > +static unsigned long get_effective_max_freq(struct devfreq *devfreq) > +{ > + return min3(devfreq->scaling_max_freq, devfreq->max_freq, > + 1000 * (unsigned long)dev_pm_qos_read_value( > + devfreq->dev.parent, > + DEV_PM_QOS_MAX_FREQUENCY)); > +} > + > /** > * devfreq_get_freq_level() - Lookup freq_table for the frequency > * @devfreq: the devfreq instance > * @freq: the target frequency > */ > @@ -356,12 +373,12 @@ int update_devfreq(struct devfreq *devfreq) > * > * List from the highest priority > * max_freq > * min_freq > */ > - max_freq = min(devfreq->scaling_max_freq, devfreq->max_freq); > - min_freq = max(devfreq->scaling_min_freq, devfreq->min_freq); > + max_freq = get_effective_max_freq(devfreq); > + min_freq = get_effective_min_freq(devfreq); > > if (freq < min_freq) { > freq = min_freq; > flags &= ~DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use GLB */ > } > @@ -570,10 +587,31 @@ static int devfreq_notifier_call(struct notifier_block *nb, unsigned long type, > mutex_unlock(&devfreq->lock); > > return ret; > } > > +static int devfreq_qos_notifier_call(struct devfreq *devfreq) > +{ > + int ret; > + > + mutex_lock(&devfreq->lock); > + ret = update_devfreq(devfreq); > + mutex_unlock(&devfreq->lock); > + > + return ret; > +} > + > +static int devfreq_qos_min_notifier_call(struct notifier_block *nb, unsigned long type, void *devp) > +{ > + return devfreq_qos_notifier_call(container_of(nb, struct devfreq, nb_min)); > +} > + > +static int devfreq_qos_max_notifier_call(struct notifier_block *nb, unsigned long type, void *devp) > +{ > + return devfreq_qos_notifier_call(container_of(nb, struct devfreq, nb_max)); > +} > + > /** > * devfreq_dev_release() - Callback for struct device to release the device. > * @dev: the devfreq device > * > * Remove devfreq from the list and release its resources. > @@ -636,21 +674,46 @@ struct devfreq *devfreq_add_device(struct device *dev, > err = -ENOMEM; > goto err_out; > } > > mutex_init(&devfreq->lock); > - mutex_lock(&devfreq->lock); > devfreq->dev.parent = dev; > devfreq->dev.class = devfreq_class; > devfreq->dev.release = devfreq_dev_release; > devfreq->profile = profile; > strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN); > devfreq->previous_freq = profile->initial_freq; > devfreq->last_status.current_frequency = profile->initial_freq; > devfreq->data = data; > devfreq->nb.notifier_call = devfreq_notifier_call; > > + /* > + * notifier from pm_qos > + * > + * initialized outside of devfreq->lock to avoid circular warning > + * between devfreq->lock and dev_pm_qos_mtx > + */ > + devfreq->nb_min.notifier_call = devfreq_qos_min_notifier_call; > + devfreq->nb_max.notifier_call = devfreq_qos_max_notifier_call; > + > + err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_min, > + DEV_PM_QOS_MIN_FREQUENCY); > + if (err) { > + dev_err(dev, "Failed to register MIN QoS notifier: %d\n", err); > + panic("fail\n"); > + goto err_dev; > + } > + > + err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_max, > + DEV_PM_QOS_MAX_FREQUENCY); > + if (err) { > + dev_err(dev, "Failed to register MAX QoS notifier: %d\n", err); > + panic("fail\n"); > + goto err_dev; > + } > + > + mutex_lock(&devfreq->lock); > if (!devfreq->profile->max_state && !devfreq->profile->freq_table) { > mutex_unlock(&devfreq->lock); > err = set_freq_table(devfreq); > if (err < 0) > goto err_dev; Where's the devfreq_remove_device() clean up of this? > @@ -1311,13 +1374,11 @@ static ssize_t min_freq_store(struct device *dev, struct device_attribute *attr, > } > > static ssize_t min_freq_show(struct device *dev, struct device_attribute *attr, > char *buf) > { > - struct devfreq *df = to_devfreq(dev); > - > - return sprintf(buf, "%lu\n", max(df->scaling_min_freq, df->min_freq)); > + return sprintf(buf, "%lu\n", get_effective_min_freq(to_devfreq(dev))); Not directly related to your patch but I wish I had caught this behavior of min_freq_show earlier and nacked it. The "show the aggregated instantaneous min freq" file should have been separate from the user space min freq file. So if init scripts set some minfreq and some other userspace daemon wants to take control of the min_freq userspace vote, there's no way for it to query the current userspace vote because the PMQoS or OPP based minfreq limits might have caused the instantaneous min freq value to have changed. We have this same mess with cpufreq too. We really need to fix this and split userspace min/max freq votes file from current min/max freq. > } > > static ssize_t max_freq_store(struct device *dev, struct device_attribute *attr, > const char *buf, size_t count) > { > @@ -1356,13 +1417,11 @@ static ssize_t max_freq_store(struct device *dev, struct device_attribute *attr, > static DEVICE_ATTR_RW(min_freq); > > static ssize_t max_freq_show(struct device *dev, struct device_attribute *attr, > char *buf) > { > - struct devfreq *df = to_devfreq(dev); > - > - return sprintf(buf, "%lu\n", min(df->scaling_max_freq, df->max_freq)); > + return sprintf(buf, "%lu\n", get_effective_max_freq(to_devfreq(dev))); > } > static DEVICE_ATTR_RW(max_freq); -Saravana
On 8/8/2019 12:48 AM, Saravana Kannan wrote: > On Tue, Aug 6, 2019 at 2:03 AM Leonard Crestez <leonard.crestez@nxp.com> wrote: >> >> Add dev_pm_qos notifies to devfreq core in order to support frequency >> limits via dev_pm_qos_add_request and related APIs >> >> Unlike the rest of devfreq the dev_pm_qos frequency is measured kHz: >> this is consistent with current dev_pm_qos usage for cpufreq and allows >> frequencies above 2Ghz. > Where's the devfreq_remove_device() clean up of this? Oops, see v2 >> static ssize_t min_freq_show(struct device *dev, struct device_attribute *attr, >> char *buf) >> { >> - struct devfreq *df = to_devfreq(dev); >> - >> - return sprintf(buf, "%lu\n", max(df->scaling_min_freq, df->min_freq)); >> + return sprintf(buf, "%lu\n", get_effective_min_freq(to_devfreq(dev))); > > Not directly related to your patch but I wish I had caught this > behavior of min_freq_show earlier and nacked it. The "show the > aggregated instantaneous min freq" file should have been separate from > the user space min freq file. So if init scripts set some minfreq and > some other userspace daemon wants to take control of the min_freq > userspace vote, there's no way for it to query the current userspace > vote because the PMQoS or OPP based minfreq limits might have caused > the instantaneous min freq value to have changed. We have this same > mess with cpufreq too. We really need to fix this and split userspace > min/max freq votes file from current min/max freq. This seems solvable by adding extra files to sysfs. -- Regards, Leonard
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 784c08e4f931..de9e825ae1f4 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -22,10 +22,11 @@ #include <linux/platform_device.h> #include <linux/list.h> #include <linux/printk.h> #include <linux/hrtimer.h> #include <linux/of.h> +#include <linux/pm_qos.h> #include "governor.h" #define CREATE_TRACE_POINTS #include <trace/events/devfreq.h> @@ -96,10 +97,26 @@ static unsigned long find_available_max_freq(struct devfreq *devfreq) dev_pm_opp_put(opp); return max_freq; } +static unsigned long get_effective_min_freq(struct devfreq *devfreq) +{ + return max3(devfreq->scaling_min_freq, devfreq->min_freq, + 1000 * (unsigned long)dev_pm_qos_read_value( + devfreq->dev.parent, + DEV_PM_QOS_MIN_FREQUENCY)); +} + +static unsigned long get_effective_max_freq(struct devfreq *devfreq) +{ + return min3(devfreq->scaling_max_freq, devfreq->max_freq, + 1000 * (unsigned long)dev_pm_qos_read_value( + devfreq->dev.parent, + DEV_PM_QOS_MAX_FREQUENCY)); +} + /** * devfreq_get_freq_level() - Lookup freq_table for the frequency * @devfreq: the devfreq instance * @freq: the target frequency */ @@ -356,12 +373,12 @@ int update_devfreq(struct devfreq *devfreq) * * List from the highest priority * max_freq * min_freq */ - max_freq = min(devfreq->scaling_max_freq, devfreq->max_freq); - min_freq = max(devfreq->scaling_min_freq, devfreq->min_freq); + max_freq = get_effective_max_freq(devfreq); + min_freq = get_effective_min_freq(devfreq); if (freq < min_freq) { freq = min_freq; flags &= ~DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use GLB */ } @@ -570,10 +587,31 @@ static int devfreq_notifier_call(struct notifier_block *nb, unsigned long type, mutex_unlock(&devfreq->lock); return ret; } +static int devfreq_qos_notifier_call(struct devfreq *devfreq) +{ + int ret; + + mutex_lock(&devfreq->lock); + ret = update_devfreq(devfreq); + mutex_unlock(&devfreq->lock); + + return ret; +} + +static int devfreq_qos_min_notifier_call(struct notifier_block *nb, unsigned long type, void *devp) +{ + return devfreq_qos_notifier_call(container_of(nb, struct devfreq, nb_min)); +} + +static int devfreq_qos_max_notifier_call(struct notifier_block *nb, unsigned long type, void *devp) +{ + return devfreq_qos_notifier_call(container_of(nb, struct devfreq, nb_max)); +} + /** * devfreq_dev_release() - Callback for struct device to release the device. * @dev: the devfreq device * * Remove devfreq from the list and release its resources. @@ -636,21 +674,46 @@ struct devfreq *devfreq_add_device(struct device *dev, err = -ENOMEM; goto err_out; } mutex_init(&devfreq->lock); - mutex_lock(&devfreq->lock); devfreq->dev.parent = dev; devfreq->dev.class = devfreq_class; devfreq->dev.release = devfreq_dev_release; devfreq->profile = profile; strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN); devfreq->previous_freq = profile->initial_freq; devfreq->last_status.current_frequency = profile->initial_freq; devfreq->data = data; devfreq->nb.notifier_call = devfreq_notifier_call; + /* + * notifier from pm_qos + * + * initialized outside of devfreq->lock to avoid circular warning + * between devfreq->lock and dev_pm_qos_mtx + */ + devfreq->nb_min.notifier_call = devfreq_qos_min_notifier_call; + devfreq->nb_max.notifier_call = devfreq_qos_max_notifier_call; + + err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_min, + DEV_PM_QOS_MIN_FREQUENCY); + if (err) { + dev_err(dev, "Failed to register MIN QoS notifier: %d\n", err); + panic("fail\n"); + goto err_dev; + } + + err = dev_pm_qos_add_notifier(devfreq->dev.parent, &devfreq->nb_max, + DEV_PM_QOS_MAX_FREQUENCY); + if (err) { + dev_err(dev, "Failed to register MAX QoS notifier: %d\n", err); + panic("fail\n"); + goto err_dev; + } + + mutex_lock(&devfreq->lock); if (!devfreq->profile->max_state && !devfreq->profile->freq_table) { mutex_unlock(&devfreq->lock); err = set_freq_table(devfreq); if (err < 0) goto err_dev; @@ -1311,13 +1374,11 @@ static ssize_t min_freq_store(struct device *dev, struct device_attribute *attr, } static ssize_t min_freq_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct devfreq *df = to_devfreq(dev); - - return sprintf(buf, "%lu\n", max(df->scaling_min_freq, df->min_freq)); + return sprintf(buf, "%lu\n", get_effective_min_freq(to_devfreq(dev))); } static ssize_t max_freq_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -1356,13 +1417,11 @@ static ssize_t max_freq_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RW(min_freq); static ssize_t max_freq_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct devfreq *df = to_devfreq(dev); - - return sprintf(buf, "%lu\n", min(df->scaling_max_freq, df->max_freq)); + return sprintf(buf, "%lu\n", get_effective_max_freq(to_devfreq(dev))); } static DEVICE_ATTR_RW(max_freq); static ssize_t available_frequencies_show(struct device *d, struct device_attribute *attr, diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index 2bae9ed3c783..939cb025d2aa 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -176,10 +176,13 @@ struct devfreq { unsigned int *trans_table; unsigned long *time_in_state; unsigned long last_stat_updated; struct srcu_notifier_head transition_notifier_list; + + struct notifier_block nb_min; + struct notifier_block nb_max; }; struct devfreq_freqs { unsigned long old; unsigned long new;
Add dev_pm_qos notifies to devfreq core in order to support frequency limits via dev_pm_qos_add_request and related APIs Unlike the rest of devfreq the dev_pm_qos frequency is measured kHz: this is consistent with current dev_pm_qos usage for cpufreq and allows frequencies above 2Ghz. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> --- drivers/devfreq/devfreq.c | 77 ++++++++++++++++++++++++++++++++++----- include/linux/devfreq.h | 3 ++ 2 files changed, 71 insertions(+), 9 deletions(-) This was inspired by recent changes adding dev_pm_qos limits for cpufreq: https://lkml.org/lkml/2019/7/4/118 The pm_qos code make deep assumptions that requests need to be expressed as "s32" through it's use of "plist". Handling freq as a kHz values seems the easiest solution for this, perhaps it should be documented in dev_pm_qos itself?