diff mbox series

[v2,2/3] media: i2c: Add IMX290 CMOS image sensor driver

Message ID 20190806130938.19916-3-manivannan.sadhasivam@linaro.org (mailing list archive)
State New, archived
Headers show
Series Add IMX290 CMOS image sensor support | expand

Commit Message

Manivannan Sadhasivam Aug. 6, 2019, 1:09 p.m. UTC
Add driver for Sony IMX290 CMOS image sensor driver. The driver only
supports I2C interface for programming and MIPI CSI-2 for sensor output.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/media/i2c/Kconfig  |  11 +
 drivers/media/i2c/Makefile |   1 +
 drivers/media/i2c/imx290.c | 845 +++++++++++++++++++++++++++++++++++++
 3 files changed, 857 insertions(+)
 create mode 100644 drivers/media/i2c/imx290.c

Comments

Sakari Ailus Aug. 13, 2019, 10:59 a.m. UTC | #1
Hi Manivannan,

On Tue, Aug 06, 2019 at 06:39:37PM +0530, Manivannan Sadhasivam wrote:
> Add driver for Sony IMX290 CMOS image sensor driver. The driver only
> supports I2C interface for programming and MIPI CSI-2 for sensor output.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/media/i2c/Kconfig  |  11 +
>  drivers/media/i2c/Makefile |   1 +
>  drivers/media/i2c/imx290.c | 845 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 857 insertions(+)
>  create mode 100644 drivers/media/i2c/imx290.c
> 
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index cb8db944aa41..256edd289abe 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -594,6 +594,17 @@ config VIDEO_IMX274
>  	  This is a V4L2 sensor driver for the Sony IMX274
>  	  CMOS image sensor.
>  
> +config VIDEO_IMX290
> +	tristate "Sony IMX290 sensor support"
> +	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> +	depends on MEDIA_CAMERA_SUPPORT
> +	help
> +	  This is a Video4Linux2 sensor driver for the Sony
> +	  IMX290 camera sensor.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called imx290.
> +
>  config VIDEO_IMX319
>  	tristate "Sony IMX319 sensor support"
>  	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index d8ad9dad495d..490e59070407 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -111,6 +111,7 @@ obj-$(CONFIG_VIDEO_TC358743)	+= tc358743.o
>  obj-$(CONFIG_VIDEO_IMX214)	+= imx214.o
>  obj-$(CONFIG_VIDEO_IMX258)	+= imx258.o
>  obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
> +obj-$(CONFIG_VIDEO_IMX290)	+= imx290.o
>  obj-$(CONFIG_VIDEO_IMX319)	+= imx319.o
>  obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
>  obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
> diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> new file mode 100644
> index 000000000000..8c50fbd51ca5
> --- /dev/null
> +++ b/drivers/media/i2c/imx290.c
> @@ -0,0 +1,845 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Sony IMX290 CMOS Image Sensor Driver
> + *
> + * Copyright (C) 2019 FRAMOS GmbH.
> + *
> + * Copyright (C) 2019 Linaro Ltd.
> + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define IMX290_STANDBY 0x3000
> +#define IMX290_REGHOLD 0x3001
> +#define IMX290_XMSTA 0x3002
> +#define IMX290_GAIN 0x3014
> +
> +static const char * const imx290_supply_name[] = {
> +	"vdda",
> +	"vddd",
> +	"vdddo",
> +};
> +
> +#define IMX290_NUM_SUPPLIES ARRAY_SIZE(imx290_supply_name)
> +
> +struct imx290_regval {
> +	u16 reg;
> +	u8 val;
> +};
> +
> +struct imx290_mode {
> +	u32 width;
> +	u32 height;
> +	u32 pixel_rate;
> +	u32 link_freq_index;
> +
> +	const struct imx290_regval *data;
> +	u32 data_size;
> +};
> +
> +struct imx290 {
> +	struct device *dev;
> +	struct clk *xclk;
> +	struct regmap *regmap;
> +
> +	struct v4l2_subdev sd;
> +	struct v4l2_fwnode_endpoint ep;
> +	struct media_pad pad;
> +	struct v4l2_mbus_framefmt current_format;
> +	const struct imx290_mode *current_mode;
> +
> +	struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES];
> +	struct gpio_desc *rst_gpio;
> +
> +	struct v4l2_ctrl_handler ctrls;
> +	struct v4l2_ctrl *link_freq;
> +	struct v4l2_ctrl *pixel_rate;
> +
> +	struct mutex lock;
> +};
> +
> +struct imx290_pixfmt {
> +	u32 code;
> +	u32 colorspace;
> +};
> +
> +static const struct imx290_pixfmt imx290_formats[] = {
> +	{ MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_COLORSPACE_SRGB, },

I bet you won't use other colorspaces in this driver. Therefore there's
there's no need to put it in an array.

> +};
> +
> +static struct regmap_config imx290_regmap_config = {
> +	.reg_bits = 16,
> +	.val_bits = 8,
> +	.cache_type = REGCACHE_RBTREE,
> +};
> +
> +static const struct imx290_regval imx290_global_init_settings[] = {
> +	{ 0x3007, 0x00 },
> +	{ 0x3009, 0x00 },
> +	{ 0x3018, 0x65 },
> +	{ 0x3019, 0x04 },
> +	{ 0x301a, 0x00 },
> +	{ 0x3443, 0x03 },
> +	{ 0x3444, 0x20 },
> +	{ 0x3445, 0x25 },
> +	{ 0x3407, 0x03 },
> +	{ 0x303a, 0x0c },
> +	{ 0x3040, 0x00 },
> +	{ 0x3041, 0x00 },
> +	{ 0x303c, 0x00 },
> +	{ 0x303d, 0x00 },
> +	{ 0x3042, 0x9c },
> +	{ 0x3043, 0x07 },
> +	{ 0x303e, 0x49 },
> +	{ 0x303f, 0x04 },
> +	{ 0x304b, 0x0a },
> +	{ 0x300f, 0x00 },
> +	{ 0x3010, 0x21 },
> +	{ 0x3012, 0x64 },
> +	{ 0x3016, 0x09 },
> +	{ 0x3070, 0x02 },
> +	{ 0x3071, 0x11 },
> +	{ 0x309b, 0x10 },
> +	{ 0x309c, 0x22 },
> +	{ 0x30a2, 0x02 },
> +	{ 0x30a6, 0x20 },
> +	{ 0x30a8, 0x20 },
> +	{ 0x30aa, 0x20 },
> +	{ 0x30ac, 0x20 },
> +	{ 0x30b0, 0x43 },
> +	{ 0x3119, 0x9e },
> +	{ 0x311c, 0x1e },
> +	{ 0x311e, 0x08 },
> +	{ 0x3128, 0x05 },
> +	{ 0x313d, 0x83 },
> +	{ 0x3150, 0x03 },
> +	{ 0x317e, 0x00 },
> +	{ 0x32b8, 0x50 },
> +	{ 0x32b9, 0x10 },
> +	{ 0x32ba, 0x00 },
> +	{ 0x32bb, 0x04 },
> +	{ 0x32c8, 0x50 },
> +	{ 0x32c9, 0x10 },
> +	{ 0x32ca, 0x00 },
> +	{ 0x32cb, 0x04 },
> +	{ 0x332c, 0xd3 },
> +	{ 0x332d, 0x10 },
> +	{ 0x332e, 0x0d },
> +	{ 0x3358, 0x06 },
> +	{ 0x3359, 0xe1 },
> +	{ 0x335a, 0x11 },
> +	{ 0x3360, 0x1e },
> +	{ 0x3361, 0x61 },
> +	{ 0x3362, 0x10 },
> +	{ 0x33b0, 0x50 },
> +	{ 0x33b2, 0x1a },
> +	{ 0x33b3, 0x04 },
> +};
> +
> +static const struct imx290_regval imx290_1080p_settings[] = {
> +	/* mode settings */
> +	{ 0x3007, 0x00 },
> +	{ 0x303a, 0x0c },
> +	{ 0x3414, 0x0a },
> +	{ 0x3472, 0x80 },
> +	{ 0x3473, 0x07 },
> +	{ 0x3418, 0x38 },
> +	{ 0x3419, 0x04 },
> +	{ 0x3012, 0x64 },
> +	{ 0x3013, 0x00 },
> +	{ 0x305c, 0x18 },
> +	{ 0x305d, 0x03 },
> +	{ 0x305e, 0x20 },
> +	{ 0x305f, 0x01 },
> +	{ 0x315e, 0x1a },
> +	{ 0x3164, 0x1a },
> +	{ 0x3480, 0x49 },
> +	/* data rate settings */
> +	{ 0x3009, 0x01 },
> +	{ 0x3405, 0x10 },
> +	{ 0x3446, 0x57 },
> +	{ 0x3447, 0x00 },
> +	{ 0x3448, 0x37 },
> +	{ 0x3449, 0x00 },
> +	{ 0x344a, 0x1f },
> +	{ 0x344b, 0x00 },
> +	{ 0x344c, 0x1f },
> +	{ 0x344d, 0x00 },
> +	{ 0x344e, 0x1f },
> +	{ 0x344f, 0x00 },
> +	{ 0x3450, 0x77 },
> +	{ 0x3451, 0x00 },
> +	{ 0x3452, 0x1f },
> +	{ 0x3453, 0x00 },
> +	{ 0x3454, 0x17 },
> +	{ 0x3455, 0x00 },
> +	{ 0x301c, 0x98 },
> +	{ 0x301d, 0x08 },
> +};
> +
> +static const struct imx290_regval imx290_720p_settings[] = {
> +	/* mode settings */
> +	{ 0x3007, 0x10 },
> +	{ 0x303a, 0x06 },
> +	{ 0x3414, 0x04 },
> +	{ 0x3472, 0x00 },
> +	{ 0x3473, 0x05 },
> +	{ 0x3418, 0xd0 },
> +	{ 0x3419, 0x02 },
> +	{ 0x3012, 0x64 },
> +	{ 0x3013, 0x00 },
> +	{ 0x305c, 0x20 },
> +	{ 0x305d, 0x00 },
> +	{ 0x305e, 0x20 },
> +	{ 0x305f, 0x01 },
> +	{ 0x315e, 0x1a },
> +	{ 0x3164, 0x1a },
> +	{ 0x3480, 0x49 },
> +	/* data rate settings */
> +	{ 0x3009, 0x01 },
> +	{ 0x3405, 0x10 },
> +	{ 0x3446, 0x4f },
> +	{ 0x3447, 0x00 },
> +	{ 0x3448, 0x2f },
> +	{ 0x3449, 0x00 },
> +	{ 0x344a, 0x17 },
> +	{ 0x344b, 0x00 },
> +	{ 0x344c, 0x17 },
> +	{ 0x344d, 0x00 },
> +	{ 0x344e, 0x17 },
> +	{ 0x344f, 0x00 },
> +	{ 0x3450, 0x57 },
> +	{ 0x3451, 0x00 },
> +	{ 0x3452, 0x17 },
> +	{ 0x3453, 0x00 },
> +	{ 0x3454, 0x17 },
> +	{ 0x3455, 0x00 },
> +	{ 0x301c, 0xe4 },
> +	{ 0x301d, 0x0c },
> +};
> +
> +static const struct imx290_regval imx290_10bit_settings[] = {
> +	{ 0x3005, 0x00},
> +	{ 0x3046, 0x00},
> +	{ 0x3129, 0x1d},
> +	{ 0x317c, 0x12},
> +	{ 0x31ec, 0x37},
> +	{ 0x3441, 0x0a},
> +	{ 0x3442, 0x0a},
> +	{ 0x300a, 0x3c},
> +	{ 0x300b, 0x00},
> +};
> +
> +/* supported link frequencies */
> +static const s64 imx290_link_freq[] = {
> +	445500000,
> +};
> +
> +/* Mode configs */
> +static const struct imx290_mode imx290_modes[] = {
> +	{
> +		.width = 1920,
> +		.height = 1080,
> +		.data = imx290_1080p_settings,
> +		.data_size = ARRAY_SIZE(imx290_1080p_settings),
> +		.pixel_rate = 178200000,
> +		.link_freq_index = 0,
> +	},
> +	{
> +		.width = 1280,
> +		.height = 720,
> +		.data = imx290_720p_settings,
> +		.data_size = ARRAY_SIZE(imx290_720p_settings),
> +		.pixel_rate = 178200000,
> +		.link_freq_index = 0,
> +	},
> +};
> +
> +static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
> +{
> +	return container_of(_sd, struct imx290, sd);
> +}
> +
> +static inline int imx290_read_reg(struct imx290 *imx290, u16 addr, u8 *value)
> +{
> +	u32 regval;
> +	int ret;
> +
> +	ret = regmap_read(imx290->regmap, addr, &regval);
> +	if (ret) {
> +		dev_err(imx290->dev, "I2C read failed for addr: %x\n", addr);
> +		return ret;
> +	}
> +
> +	*value = regval & 0xFF;

Lower case hexadecimals are preferred.

> +
> +	return 0;
> +}
> +
> +static int imx290_write_reg(struct imx290 *imx290, u16 addr, u8 value)
> +{
> +	int ret;
> +
> +	ret = regmap_write(imx290->regmap, addr, value);
> +	if (ret) {
> +		dev_err(imx290->dev, "I2C write failed for addr: %x\n", addr);
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +static int imx290_set_register_array(struct imx290 *imx290,
> +				     const struct imx290_regval *settings,
> +				     unsigned int num_settings)
> +{
> +	unsigned int i;
> +	int ret;
> +
> +	for (i = 0; i < num_settings; ++i, ++settings) {
> +		ret = imx290_write_reg(imx290, settings->reg, settings->val);
> +		if (ret < 0)
> +			return ret;
> +
> +		/* Settle time is 10ms for all registers */
> +		msleep(10);
> +	}
> +
> +	return 0;
> +}
> +
> +static int imx290_write_buffered_reg(struct imx290 *imx290, u16 address_low,
> +				     u8 nr_regs, u32 value)
> +{
> +	int ret, i;

unsigned int i

> +	u8 val = 0;
> +
> +	ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x01);
> +	if (ret) {
> +		dev_err(imx290->dev, "Error setting hold register\n");
> +		return ret;
> +	}
> +
> +	for (i = 0; i < nr_regs; i++) {
> +		imx290_read_reg(imx290, address_low + i, &val);

What's the purpose of reading back val, and doing the same again below?

You could do this in a much more simple way in a single write, see e.g.
ov5670_write_reg().

> +		ret = imx290_write_reg(imx290, address_low + i,
> +				       (u8)(value >> (i * 8)));
> +		if (ret) {
> +			dev_err(imx290->dev, "Error writing buffered registers\n");
> +			return ret;
> +		}
> +		imx290_read_reg(imx290, address_low + i, &val);
> +	}
> +
> +	ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x00);
> +	if (ret) {
> +		dev_err(imx290->dev, "Error setting hold register\n");
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +static int imx290_set_gain(struct imx290 *imx290, u32 value)
> +{
> +	int ret;
> +
> +	u32 adjusted_value = (value * 10) / 3;
> +
> +	ret = imx290_write_buffered_reg(imx290, IMX290_GAIN, 1, adjusted_value);
> +	if (ret)
> +		dev_err(imx290->dev, "Unable to write gain\n");
> +
> +	return ret;
> +}
> +
> +static int imx290_set_power_on(struct imx290 *imx290)
> +{
> +	int ret;
> +
> +	ret = clk_prepare_enable(imx290->xclk);
> +	if (ret) {
> +		dev_err(imx290->dev, "Failed to enable clock\n");
> +		return ret;
> +	}
> +
> +	ret = regulator_bulk_enable(IMX290_NUM_SUPPLIES,
> +				    imx290->supplies);
> +	if (ret) {
> +		dev_err(imx290->dev, "Failed to enable regulators\n");
> +		goto xclk_off;
> +	}
> +
> +	usleep_range(1, 2);
> +	gpiod_set_value_cansleep(imx290->rst_gpio, 1);
> +	usleep_range(30000, 31000);
> +
> +	return 0;
> +
> +xclk_off:
> +	clk_disable_unprepare(imx290->xclk);
> +	return ret;
> +}
> +
> +/* Stop streaming */
> +static int imx290_stop_streaming(struct imx290 *imx290)
> +{
> +	int ret;
> +
> +	ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x01);
> +	if (ret < 0)
> +		return ret;
> +
> +	msleep(30);
> +
> +	return imx290_write_reg(imx290, IMX290_XMSTA, 0x01);
> +}
> +
> +static void imx290_set_power_off(struct imx290 *imx290)
> +{
> +	clk_disable_unprepare(imx290->xclk);
> +	gpiod_set_value_cansleep(imx290->rst_gpio, 0);
> +	regulator_bulk_disable(IMX290_NUM_SUPPLIES, imx290->supplies);
> +}
> +
> +static int imx290_s_power(struct v4l2_subdev *sd, int on)
> +{
> +	struct imx290 *imx290 = to_imx290(sd);
> +	int ret = 0;
> +
> +	mutex_lock(&imx290->lock);
> +
> +	if (on) {
> +		ret = imx290_set_power_on(imx290);
> +		if (ret < 0)
> +			goto exit;
> +
> +		ret = imx290_set_register_array(imx290,
> +				imx290_global_init_settings,
> +				ARRAY_SIZE(imx290_global_init_settings));
> +		if (ret < 0) {
> +			dev_err(imx290->dev,
> +				"Could not set init registers\n");
> +			imx290_set_power_off(imx290);
> +			goto exit;
> +		}
> +
> +		imx290_stop_streaming(imx290);
> +	} else {
> +		imx290_set_power_off(imx290);
> +	}
> +
> +exit:
> +	mutex_unlock(&imx290->lock);
> +
> +	return ret;

Please use runtime PM instead. It simplifies the driver. See e.g.
drivers/media/i2c/ov5670.c or drivers/media/i2c/ov5695.c .

> +}
> +
> +static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> +	struct imx290 *imx290 = container_of(ctrl->handler,
> +					     struct imx290, ctrls);
> +	int ret = 0;
> +
> +	mutex_lock(&imx290->lock);
> +
> +	switch (ctrl->id) {
> +	case V4L2_CID_GAIN:
> +		ret = imx290_set_gain(imx290, ctrl->val);
> +		break;
> +	default:
> +		dev_info(imx290->dev, "ctrl(id:0x%x,val:0x%x) is not handled",
> +			 ctrl->id, ctrl->val);

Please return an error; I'd do it instead of printing that.

> +		break;
> +	}
> +
> +	mutex_unlock(&imx290->lock);
> +
> +	return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops imx290_ctrl_ops = {
> +	.s_ctrl = imx290_set_ctrl,
> +};
> +
> +static int imx290_enum_mbus_code(struct v4l2_subdev *sd,
> +				 struct v4l2_subdev_pad_config *cfg,
> +				 struct v4l2_subdev_mbus_code_enum *code)
> +{
> +	if (code->index >= ARRAY_SIZE(imx290_formats))
> +		return -EINVAL;
> +
> +	code->code = imx290_formats[code->index].code;
> +
> +	return 0;
> +}
> +
> +static int imx290_get_fmt(struct v4l2_subdev *sd,
> +			  struct v4l2_subdev_pad_config *cfg,
> +			  struct v4l2_subdev_format *fmt)
> +{
> +	struct imx290 *imx290 = to_imx290(sd);
> +	struct v4l2_mbus_framefmt *framefmt;
> +
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> +		framefmt = v4l2_subdev_get_try_format(&imx290->sd, cfg,
> +						      fmt->pad);
> +	else
> +		framefmt = &imx290->current_format;
> +
> +	fmt->format = *framefmt;
> +
> +	return 0;
> +}
> +
> +static int imx290_set_fmt(struct v4l2_subdev *sd,
> +			  struct v4l2_subdev_pad_config *cfg,
> +		      struct v4l2_subdev_format *fmt)
> +{
> +	struct imx290 *imx290 = to_imx290(sd);
> +	const struct imx290_mode *mode;
> +	struct v4l2_mbus_framefmt *format;
> +	int i, ret = 0;

Note that sub-device drivers need to serialise access through the uAPI to
their own data.

> +
> +	mode = v4l2_find_nearest_size(imx290_modes,
> +				      ARRAY_SIZE(imx290_modes),
> +				      width, height,
> +				      fmt->format.width, fmt->format.height);
> +
> +	fmt->format.width = mode->width;
> +	fmt->format.height = mode->height;
> +
> +	for (i = 0; i < ARRAY_SIZE(imx290_formats); i++)
> +		if (imx290_formats[i].code == fmt->format.code)
> +			break;
> +
> +	if (i >= ARRAY_SIZE(imx290_formats))
> +		i = 0;
> +
> +	fmt->format.code = imx290_formats[i].code;
> +	fmt->format.colorspace = imx290_formats[i].colorspace;
> +	fmt->format.field = V4L2_FIELD_NONE;
> +
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> +		format = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
> +	} else {
> +		format = &imx290->current_format;
> +		__v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index);
> +		__v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate, mode->pixel_rate);
> +
> +		imx290->current_mode = mode;
> +	}
> +
> +	*format = fmt->format;
> +
> +	return ret;
> +}
> +
> +static int imx290_entity_init_cfg(struct v4l2_subdev *subdev,
> +				  struct v4l2_subdev_pad_config *cfg)
> +{
> +	struct v4l2_subdev_format fmt = { 0 };
> +
> +	fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> +	fmt.format.width = 1920;
> +	fmt.format.height = 1080;
> +
> +	imx290_set_fmt(subdev, cfg, &fmt);
> +
> +	return 0;
> +}
> +
> +static int imx290_write_current_format(struct imx290 *imx290,
> +				       struct v4l2_mbus_framefmt *format)
> +{
> +	int ret;
> +
> +	switch (format->code) {
> +	case MEDIA_BUS_FMT_SRGGB10_1X10:
> +		ret = imx290_set_register_array(imx290, imx290_10bit_settings,
> +					ARRAY_SIZE(imx290_10bit_settings));
> +		if (ret < 0) {
> +			dev_err(imx290->dev, "Could not set format registers\n");
> +			return ret;
> +		}
> +		break;
> +	default:
> +		dev_err(imx290->dev, "Unknown pixel format\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +/* Start streaming */
> +static int imx290_start_streaming(struct imx290 *imx290)
> +{
> +	int ret;
> +
> +	/* Set current frame format */
> +	ret = imx290_write_current_format(imx290, &imx290->current_format);
> +	if (ret < 0) {
> +		dev_err(imx290->dev, "Could not set frame format\n");
> +		return ret;
> +	}
> +
> +	/* Apply default values of current mode */
> +	ret = imx290_set_register_array(imx290, imx290->current_mode->data,
> +					imx290->current_mode->data_size);
> +	if (ret < 0) {
> +		dev_err(imx290->dev, "Could not set current mode\n");
> +		return ret;
> +	}
> +
> +	/* Apply customized values from user */
> +	ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
> +	if (ret) {
> +		dev_err(imx290->dev, "Could not sync v4l2 controls\n");
> +		return ret;
> +	}
> +
> +	ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x00);
> +	if (ret < 0)
> +		return ret;
> +
> +	msleep(30);
> +
> +	/* Start streaming */
> +	return imx290_write_reg(imx290, IMX290_XMSTA, 0x00);
> +}
> +
> +static int imx290_set_stream(struct v4l2_subdev *sd, int enable)
> +{
> +	struct imx290 *imx290 = to_imx290(sd);
> +	int ret = 0;
> +
> +	if (enable)
> +		ret = imx290_start_streaming(imx290);
> +	else
> +		imx290_stop_streaming(imx290);
> +
> +	return ret;
> +}
> +
> +static int imx290_get_regulators(struct device *dev, struct imx290 *imx290)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < IMX290_NUM_SUPPLIES; i++)
> +		imx290->supplies[i].supply = imx290_supply_name[i];
> +
> +	return devm_regulator_bulk_get(dev, IMX290_NUM_SUPPLIES,
> +				       imx290->supplies);
> +}
> +
> +static const struct v4l2_subdev_core_ops imx290_subdev_core_ops = {
> +	.s_power = imx290_s_power,
> +};
> +
> +static const struct v4l2_subdev_video_ops imx290_video_ops = {
> +	.s_stream = imx290_set_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops imx290_pad_ops = {
> +	.init_cfg = imx290_entity_init_cfg,
> +	.enum_mbus_code = imx290_enum_mbus_code,
> +	.get_fmt = imx290_get_fmt,
> +	.set_fmt = imx290_set_fmt,
> +};
> +
> +static const struct v4l2_subdev_ops imx290_subdev_ops = {
> +	.core = &imx290_subdev_core_ops,
> +	.video = &imx290_video_ops,
> +	.pad = &imx290_pad_ops,
> +};
> +
> +static const struct media_entity_operations imx290_subdev_entity_ops = {
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static int imx290_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct fwnode_handle *endpoint;
> +	struct imx290 *imx290;
> +	u32 xclk_freq;
> +	int ret;
> +
> +	imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL);
> +	if (!imx290)
> +		return -ENOMEM;
> +
> +	imx290->dev = dev;
> +	imx290->regmap = devm_regmap_init_i2c(client, &imx290_regmap_config);
> +	if (IS_ERR(imx290->regmap)) {
> +		dev_err(dev, "Unable to initialize I2C\n");
> +		return -ENODEV;
> +	}
> +
> +	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
> +	if (!endpoint) {
> +		dev_err(dev, "Endpoint node not found\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = v4l2_fwnode_endpoint_parse(endpoint, &imx290->ep);
> +	fwnode_handle_put(endpoint);
> +	if (ret < 0) {
> +		dev_err(dev, "Parsing endpoint node failed\n");
> +		return ret;
> +	}
> +
> +	/* Only CSI2 is supported for now */
> +	if (imx290->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
> +		dev_err(dev, "Unsupported bus type, should be CSI2\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Set default mode to max resolution */
> +	imx290->current_mode = &imx290_modes[0];
> +
> +	/* get system clock (xclk) */
> +	imx290->xclk = devm_clk_get(dev, "xclk");
> +	if (IS_ERR(imx290->xclk)) {
> +		dev_err(dev, "Could not get xclk");
> +		return PTR_ERR(imx290->xclk);
> +	}
> +
> +	ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
> +	if (ret) {
> +		dev_err(dev, "Could not get xclk frequency\n");
> +		return ret;
> +	}
> +
> +	/* external clock must be 37.125 MHz */
> +	if (xclk_freq != 37125000) {
> +		dev_err(dev, "External clock frequency %u is not supported\n",
> +			xclk_freq);
> +		return -EINVAL;
> +	}
> +
> +	ret = clk_set_rate(imx290->xclk, xclk_freq);
> +	if (ret) {
> +		dev_err(dev, "Could not set xclk frequency\n");
> +		return ret;
> +	}
> +
> +	ret = imx290_get_regulators(dev, imx290);
> +	if (ret < 0) {
> +		dev_err(dev, "Cannot get regulators\n");
> +		return ret;
> +	}
> +
> +	imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS);
> +	if (IS_ERR(imx290->rst_gpio)) {
> +		dev_err(dev, "Cannot get reset gpio\n");

Remember to put the regulators from now on. Or grab them later.

> +		return PTR_ERR(imx290->rst_gpio);
> +	}
> +
> +	mutex_init(&imx290->lock);
> +
> +	v4l2_ctrl_handler_init(&imx290->ctrls, 3);
> +
> +	v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> +			  V4L2_CID_GAIN, 0, 72, 1, 0);
> +	imx290->link_freq = v4l2_ctrl_new_int_menu(&imx290->ctrls,
> +					&imx290_ctrl_ops,
> +					V4L2_CID_LINK_FREQ,
> +					ARRAY_SIZE(imx290_link_freq) - 1,
> +					0, imx290_link_freq);
> +	if (imx290->link_freq)
> +		imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> +	imx290->pixel_rate = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> +					       V4L2_CID_PIXEL_RATE, 1,
> +					       INT_MAX, 1,
> +					       imx290_modes[0].pixel_rate);
> +
> +	imx290->sd.ctrl_handler = &imx290->ctrls;
> +
> +	if (imx290->ctrls.error) {
> +		dev_err(dev, "Control initialization error %d\n",
> +			imx290->ctrls.error);
> +		ret = imx290->ctrls.error;
> +		goto free_ctrl;
> +	}
> +
> +	v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
> +	imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	imx290->sd.dev = &client->dev;
> +	imx290->sd.entity.ops = &imx290_subdev_entity_ops;
> +	imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> +	imx290->pad.flags = MEDIA_PAD_FL_SOURCE;
> +	ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad);
> +	if (ret < 0) {
> +		dev_err(dev, "Could not register media entity\n");
> +		goto free_ctrl;
> +	}
> +
> +	ret = v4l2_async_register_subdev(&imx290->sd);
> +	if (ret < 0) {
> +		dev_err(dev, "Could not register v4l2 device\n");
> +		goto free_entity;
> +	}
> +
> +	return 0;
> +
> +free_entity:
> +	media_entity_cleanup(&imx290->sd.entity);
> +free_ctrl:
> +	v4l2_ctrl_handler_free(&imx290->ctrls);
> +	mutex_destroy(&imx290->lock);
> +
> +	return ret;
> +}
> +
> +static int imx290_remove(struct i2c_client *client)
> +{
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> +	struct imx290 *imx290 = to_imx290(sd);
> +
> +	v4l2_async_unregister_subdev(sd);
> +	media_entity_cleanup(&sd->entity);
> +	v4l2_ctrl_handler_free(sd->ctrl_handler);
> +
> +	imx290_set_power_off(imx290);
> +	mutex_destroy(&imx290->lock);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id imx290_of_match[] = {
> +	{ .compatible = "sony,imx290" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx290_of_match);
> +
> +static struct i2c_driver imx290_i2c_driver = {
> +	.probe  = imx290_probe,

Please use probe_new instead.

> +	.remove = imx290_remove,
> +	.driver = {
> +		.name  = "imx290",
> +		.of_match_table = of_match_ptr(imx290_of_match),
> +	},
> +};
> +
> +module_i2c_driver(imx290_i2c_driver);
> +
> +MODULE_DESCRIPTION("Sony IMX290 CMOS Image Sensor Driver");
> +MODULE_AUTHOR("FRAMOS GmbH");
> +MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
> +MODULE_LICENSE("GPL v2");
Manivannan Sadhasivam Aug. 29, 2019, 5:04 p.m. UTC | #2
Hi Sakari,

Thanks for the review!

On Tue, Aug 13, 2019 at 01:59:20PM +0300, Sakari Ailus wrote:
> Hi Manivannan,
> 
> On Tue, Aug 06, 2019 at 06:39:37PM +0530, Manivannan Sadhasivam wrote:
> > Add driver for Sony IMX290 CMOS image sensor driver. The driver only
> > supports I2C interface for programming and MIPI CSI-2 for sensor output.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  drivers/media/i2c/Kconfig  |  11 +
> >  drivers/media/i2c/Makefile |   1 +
> >  drivers/media/i2c/imx290.c | 845 +++++++++++++++++++++++++++++++++++++
> >  3 files changed, 857 insertions(+)
> >  create mode 100644 drivers/media/i2c/imx290.c
> > 
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index cb8db944aa41..256edd289abe 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -594,6 +594,17 @@ config VIDEO_IMX274
> >  	  This is a V4L2 sensor driver for the Sony IMX274
> >  	  CMOS image sensor.
> >  
> > +config VIDEO_IMX290
> > +	tristate "Sony IMX290 sensor support"
> > +	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > +	depends on MEDIA_CAMERA_SUPPORT
> > +	help
> > +	  This is a Video4Linux2 sensor driver for the Sony
> > +	  IMX290 camera sensor.
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called imx290.
> > +
> >  config VIDEO_IMX319
> >  	tristate "Sony IMX319 sensor support"
> >  	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > index d8ad9dad495d..490e59070407 100644
> > --- a/drivers/media/i2c/Makefile
> > +++ b/drivers/media/i2c/Makefile
> > @@ -111,6 +111,7 @@ obj-$(CONFIG_VIDEO_TC358743)	+= tc358743.o
> >  obj-$(CONFIG_VIDEO_IMX214)	+= imx214.o
> >  obj-$(CONFIG_VIDEO_IMX258)	+= imx258.o
> >  obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
> > +obj-$(CONFIG_VIDEO_IMX290)	+= imx290.o
> >  obj-$(CONFIG_VIDEO_IMX319)	+= imx319.o
> >  obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
> >  obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
> > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > new file mode 100644
> > index 000000000000..8c50fbd51ca5
> > --- /dev/null
> > +++ b/drivers/media/i2c/imx290.c
> > @@ -0,0 +1,845 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Sony IMX290 CMOS Image Sensor Driver
> > + *
> > + * Copyright (C) 2019 FRAMOS GmbH.
> > + *
> > + * Copyright (C) 2019 Linaro Ltd.
> > + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <media/media-entity.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-subdev.h>
> > +
> > +#define IMX290_STANDBY 0x3000
> > +#define IMX290_REGHOLD 0x3001
> > +#define IMX290_XMSTA 0x3002
> > +#define IMX290_GAIN 0x3014
> > +
> > +static const char * const imx290_supply_name[] = {
> > +	"vdda",
> > +	"vddd",
> > +	"vdddo",
> > +};
> > +
> > +#define IMX290_NUM_SUPPLIES ARRAY_SIZE(imx290_supply_name)
> > +
> > +struct imx290_regval {
> > +	u16 reg;
> > +	u8 val;
> > +};
> > +
> > +struct imx290_mode {
> > +	u32 width;
> > +	u32 height;
> > +	u32 pixel_rate;
> > +	u32 link_freq_index;
> > +
> > +	const struct imx290_regval *data;
> > +	u32 data_size;
> > +};
> > +
> > +struct imx290 {
> > +	struct device *dev;
> > +	struct clk *xclk;
> > +	struct regmap *regmap;
> > +
> > +	struct v4l2_subdev sd;
> > +	struct v4l2_fwnode_endpoint ep;
> > +	struct media_pad pad;
> > +	struct v4l2_mbus_framefmt current_format;
> > +	const struct imx290_mode *current_mode;
> > +
> > +	struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES];
> > +	struct gpio_desc *rst_gpio;
> > +
> > +	struct v4l2_ctrl_handler ctrls;
> > +	struct v4l2_ctrl *link_freq;
> > +	struct v4l2_ctrl *pixel_rate;
> > +
> > +	struct mutex lock;
> > +};
> > +
> > +struct imx290_pixfmt {
> > +	u32 code;
> > +	u32 colorspace;
> > +};
> > +
> > +static const struct imx290_pixfmt imx290_formats[] = {
> > +	{ MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_COLORSPACE_SRGB, },
> 
> I bet you won't use other colorspaces in this driver. Therefore there's
> there's no need to put it in an array.
> 

Ack.

> > +};
> > +
> > +static struct regmap_config imx290_regmap_config = {
> > +	.reg_bits = 16,
> > +	.val_bits = 8,
> > +	.cache_type = REGCACHE_RBTREE,
> > +};
> > +
> > +static const struct imx290_regval imx290_global_init_settings[] = {
> > +	{ 0x3007, 0x00 },
> > +	{ 0x3009, 0x00 },
> > +	{ 0x3018, 0x65 },
> > +	{ 0x3019, 0x04 },
> > +	{ 0x301a, 0x00 },
> > +	{ 0x3443, 0x03 },
> > +	{ 0x3444, 0x20 },
> > +	{ 0x3445, 0x25 },
> > +	{ 0x3407, 0x03 },
> > +	{ 0x303a, 0x0c },
> > +	{ 0x3040, 0x00 },
> > +	{ 0x3041, 0x00 },
> > +	{ 0x303c, 0x00 },
> > +	{ 0x303d, 0x00 },
> > +	{ 0x3042, 0x9c },
> > +	{ 0x3043, 0x07 },
> > +	{ 0x303e, 0x49 },
> > +	{ 0x303f, 0x04 },
> > +	{ 0x304b, 0x0a },
> > +	{ 0x300f, 0x00 },
> > +	{ 0x3010, 0x21 },
> > +	{ 0x3012, 0x64 },
> > +	{ 0x3016, 0x09 },
> > +	{ 0x3070, 0x02 },
> > +	{ 0x3071, 0x11 },
> > +	{ 0x309b, 0x10 },
> > +	{ 0x309c, 0x22 },
> > +	{ 0x30a2, 0x02 },
> > +	{ 0x30a6, 0x20 },
> > +	{ 0x30a8, 0x20 },
> > +	{ 0x30aa, 0x20 },
> > +	{ 0x30ac, 0x20 },
> > +	{ 0x30b0, 0x43 },
> > +	{ 0x3119, 0x9e },
> > +	{ 0x311c, 0x1e },
> > +	{ 0x311e, 0x08 },
> > +	{ 0x3128, 0x05 },
> > +	{ 0x313d, 0x83 },
> > +	{ 0x3150, 0x03 },
> > +	{ 0x317e, 0x00 },
> > +	{ 0x32b8, 0x50 },
> > +	{ 0x32b9, 0x10 },
> > +	{ 0x32ba, 0x00 },
> > +	{ 0x32bb, 0x04 },
> > +	{ 0x32c8, 0x50 },
> > +	{ 0x32c9, 0x10 },
> > +	{ 0x32ca, 0x00 },
> > +	{ 0x32cb, 0x04 },
> > +	{ 0x332c, 0xd3 },
> > +	{ 0x332d, 0x10 },
> > +	{ 0x332e, 0x0d },
> > +	{ 0x3358, 0x06 },
> > +	{ 0x3359, 0xe1 },
> > +	{ 0x335a, 0x11 },
> > +	{ 0x3360, 0x1e },
> > +	{ 0x3361, 0x61 },
> > +	{ 0x3362, 0x10 },
> > +	{ 0x33b0, 0x50 },
> > +	{ 0x33b2, 0x1a },
> > +	{ 0x33b3, 0x04 },
> > +};
> > +
> > +static const struct imx290_regval imx290_1080p_settings[] = {
> > +	/* mode settings */
> > +	{ 0x3007, 0x00 },
> > +	{ 0x303a, 0x0c },
> > +	{ 0x3414, 0x0a },
> > +	{ 0x3472, 0x80 },
> > +	{ 0x3473, 0x07 },
> > +	{ 0x3418, 0x38 },
> > +	{ 0x3419, 0x04 },
> > +	{ 0x3012, 0x64 },
> > +	{ 0x3013, 0x00 },
> > +	{ 0x305c, 0x18 },
> > +	{ 0x305d, 0x03 },
> > +	{ 0x305e, 0x20 },
> > +	{ 0x305f, 0x01 },
> > +	{ 0x315e, 0x1a },
> > +	{ 0x3164, 0x1a },
> > +	{ 0x3480, 0x49 },
> > +	/* data rate settings */
> > +	{ 0x3009, 0x01 },
> > +	{ 0x3405, 0x10 },
> > +	{ 0x3446, 0x57 },
> > +	{ 0x3447, 0x00 },
> > +	{ 0x3448, 0x37 },
> > +	{ 0x3449, 0x00 },
> > +	{ 0x344a, 0x1f },
> > +	{ 0x344b, 0x00 },
> > +	{ 0x344c, 0x1f },
> > +	{ 0x344d, 0x00 },
> > +	{ 0x344e, 0x1f },
> > +	{ 0x344f, 0x00 },
> > +	{ 0x3450, 0x77 },
> > +	{ 0x3451, 0x00 },
> > +	{ 0x3452, 0x1f },
> > +	{ 0x3453, 0x00 },
> > +	{ 0x3454, 0x17 },
> > +	{ 0x3455, 0x00 },
> > +	{ 0x301c, 0x98 },
> > +	{ 0x301d, 0x08 },
> > +};
> > +
> > +static const struct imx290_regval imx290_720p_settings[] = {
> > +	/* mode settings */
> > +	{ 0x3007, 0x10 },
> > +	{ 0x303a, 0x06 },
> > +	{ 0x3414, 0x04 },
> > +	{ 0x3472, 0x00 },
> > +	{ 0x3473, 0x05 },
> > +	{ 0x3418, 0xd0 },
> > +	{ 0x3419, 0x02 },
> > +	{ 0x3012, 0x64 },
> > +	{ 0x3013, 0x00 },
> > +	{ 0x305c, 0x20 },
> > +	{ 0x305d, 0x00 },
> > +	{ 0x305e, 0x20 },
> > +	{ 0x305f, 0x01 },
> > +	{ 0x315e, 0x1a },
> > +	{ 0x3164, 0x1a },
> > +	{ 0x3480, 0x49 },
> > +	/* data rate settings */
> > +	{ 0x3009, 0x01 },
> > +	{ 0x3405, 0x10 },
> > +	{ 0x3446, 0x4f },
> > +	{ 0x3447, 0x00 },
> > +	{ 0x3448, 0x2f },
> > +	{ 0x3449, 0x00 },
> > +	{ 0x344a, 0x17 },
> > +	{ 0x344b, 0x00 },
> > +	{ 0x344c, 0x17 },
> > +	{ 0x344d, 0x00 },
> > +	{ 0x344e, 0x17 },
> > +	{ 0x344f, 0x00 },
> > +	{ 0x3450, 0x57 },
> > +	{ 0x3451, 0x00 },
> > +	{ 0x3452, 0x17 },
> > +	{ 0x3453, 0x00 },
> > +	{ 0x3454, 0x17 },
> > +	{ 0x3455, 0x00 },
> > +	{ 0x301c, 0xe4 },
> > +	{ 0x301d, 0x0c },
> > +};
> > +
> > +static const struct imx290_regval imx290_10bit_settings[] = {
> > +	{ 0x3005, 0x00},
> > +	{ 0x3046, 0x00},
> > +	{ 0x3129, 0x1d},
> > +	{ 0x317c, 0x12},
> > +	{ 0x31ec, 0x37},
> > +	{ 0x3441, 0x0a},
> > +	{ 0x3442, 0x0a},
> > +	{ 0x300a, 0x3c},
> > +	{ 0x300b, 0x00},
> > +};
> > +
> > +/* supported link frequencies */
> > +static const s64 imx290_link_freq[] = {
> > +	445500000,
> > +};
> > +
> > +/* Mode configs */
> > +static const struct imx290_mode imx290_modes[] = {
> > +	{
> > +		.width = 1920,
> > +		.height = 1080,
> > +		.data = imx290_1080p_settings,
> > +		.data_size = ARRAY_SIZE(imx290_1080p_settings),
> > +		.pixel_rate = 178200000,
> > +		.link_freq_index = 0,
> > +	},
> > +	{
> > +		.width = 1280,
> > +		.height = 720,
> > +		.data = imx290_720p_settings,
> > +		.data_size = ARRAY_SIZE(imx290_720p_settings),
> > +		.pixel_rate = 178200000,
> > +		.link_freq_index = 0,
> > +	},
> > +};
> > +
> > +static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
> > +{
> > +	return container_of(_sd, struct imx290, sd);
> > +}
> > +
> > +static inline int imx290_read_reg(struct imx290 *imx290, u16 addr, u8 *value)
> > +{
> > +	u32 regval;
> > +	int ret;
> > +
> > +	ret = regmap_read(imx290->regmap, addr, &regval);
> > +	if (ret) {
> > +		dev_err(imx290->dev, "I2C read failed for addr: %x\n", addr);
> > +		return ret;
> > +	}
> > +
> > +	*value = regval & 0xFF;
> 
> Lower case hexadecimals are preferred.
> 

Ack.

> > +
> > +	return 0;
> > +}
> > +
> > +static int imx290_write_reg(struct imx290 *imx290, u16 addr, u8 value)
> > +{
> > +	int ret;
> > +
> > +	ret = regmap_write(imx290->regmap, addr, value);
> > +	if (ret) {
> > +		dev_err(imx290->dev, "I2C write failed for addr: %x\n", addr);
> > +		return ret;
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static int imx290_set_register_array(struct imx290 *imx290,
> > +				     const struct imx290_regval *settings,
> > +				     unsigned int num_settings)
> > +{
> > +	unsigned int i;
> > +	int ret;
> > +
> > +	for (i = 0; i < num_settings; ++i, ++settings) {
> > +		ret = imx290_write_reg(imx290, settings->reg, settings->val);
> > +		if (ret < 0)
> > +			return ret;
> > +
> > +		/* Settle time is 10ms for all registers */
> > +		msleep(10);
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int imx290_write_buffered_reg(struct imx290 *imx290, u16 address_low,
> > +				     u8 nr_regs, u32 value)
> > +{
> > +	int ret, i;
> 
> unsigned int i
> 

okay.

> > +	u8 val = 0;
> > +
> > +	ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x01);
> > +	if (ret) {
> > +		dev_err(imx290->dev, "Error setting hold register\n");
> > +		return ret;
> > +	}
> > +
> > +	for (i = 0; i < nr_regs; i++) {
> > +		imx290_read_reg(imx290, address_low + i, &val);
> 
> What's the purpose of reading back val, and doing the same again below?
> 
> You could do this in a much more simple way in a single write, see e.g.
> ov5670_write_reg().
> 

Right, this came from the vendor driver but looks like we don't need to read
before and after. Will remove the read calls.

> > +		ret = imx290_write_reg(imx290, address_low + i,
> > +				       (u8)(value >> (i * 8)));
> > +		if (ret) {
> > +			dev_err(imx290->dev, "Error writing buffered registers\n");
> > +			return ret;
> > +		}
> > +		imx290_read_reg(imx290, address_low + i, &val);
> > +	}
> > +
> > +	ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x00);
> > +	if (ret) {
> > +		dev_err(imx290->dev, "Error setting hold register\n");
> > +		return ret;
> > +	}
> > +
> > +	return ret;
> > +}
> > +
> > +static int imx290_set_gain(struct imx290 *imx290, u32 value)
> > +{
> > +	int ret;
> > +
> > +	u32 adjusted_value = (value * 10) / 3;
> > +
> > +	ret = imx290_write_buffered_reg(imx290, IMX290_GAIN, 1, adjusted_value);
> > +	if (ret)
> > +		dev_err(imx290->dev, "Unable to write gain\n");
> > +
> > +	return ret;
> > +}
> > +
> > +static int imx290_set_power_on(struct imx290 *imx290)
> > +{
> > +	int ret;
> > +
> > +	ret = clk_prepare_enable(imx290->xclk);
> > +	if (ret) {
> > +		dev_err(imx290->dev, "Failed to enable clock\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = regulator_bulk_enable(IMX290_NUM_SUPPLIES,
> > +				    imx290->supplies);
> > +	if (ret) {
> > +		dev_err(imx290->dev, "Failed to enable regulators\n");
> > +		goto xclk_off;
> > +	}
> > +
> > +	usleep_range(1, 2);
> > +	gpiod_set_value_cansleep(imx290->rst_gpio, 1);
> > +	usleep_range(30000, 31000);
> > +
> > +	return 0;
> > +
> > +xclk_off:
> > +	clk_disable_unprepare(imx290->xclk);
> > +	return ret;
> > +}
> > +
> > +/* Stop streaming */
> > +static int imx290_stop_streaming(struct imx290 *imx290)
> > +{
> > +	int ret;
> > +
> > +	ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x01);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	msleep(30);
> > +
> > +	return imx290_write_reg(imx290, IMX290_XMSTA, 0x01);
> > +}
> > +
> > +static void imx290_set_power_off(struct imx290 *imx290)
> > +{
> > +	clk_disable_unprepare(imx290->xclk);
> > +	gpiod_set_value_cansleep(imx290->rst_gpio, 0);
> > +	regulator_bulk_disable(IMX290_NUM_SUPPLIES, imx290->supplies);
> > +}
> > +
> > +static int imx290_s_power(struct v4l2_subdev *sd, int on)
> > +{
> > +	struct imx290 *imx290 = to_imx290(sd);
> > +	int ret = 0;
> > +
> > +	mutex_lock(&imx290->lock);
> > +
> > +	if (on) {
> > +		ret = imx290_set_power_on(imx290);
> > +		if (ret < 0)
> > +			goto exit;
> > +
> > +		ret = imx290_set_register_array(imx290,
> > +				imx290_global_init_settings,
> > +				ARRAY_SIZE(imx290_global_init_settings));
> > +		if (ret < 0) {
> > +			dev_err(imx290->dev,
> > +				"Could not set init registers\n");
> > +			imx290_set_power_off(imx290);
> > +			goto exit;
> > +		}
> > +
> > +		imx290_stop_streaming(imx290);
> > +	} else {
> > +		imx290_set_power_off(imx290);
> > +	}
> > +
> > +exit:
> > +	mutex_unlock(&imx290->lock);
> > +
> > +	return ret;
> 
> Please use runtime PM instead. It simplifies the driver. See e.g.
> drivers/media/i2c/ov5670.c or drivers/media/i2c/ov5695.c .
> 

Ack.

> > +}
> > +
> > +static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > +	struct imx290 *imx290 = container_of(ctrl->handler,
> > +					     struct imx290, ctrls);
> > +	int ret = 0;
> > +
> > +	mutex_lock(&imx290->lock);
> > +
> > +	switch (ctrl->id) {
> > +	case V4L2_CID_GAIN:
> > +		ret = imx290_set_gain(imx290, ctrl->val);
> > +		break;
> > +	default:
> > +		dev_info(imx290->dev, "ctrl(id:0x%x,val:0x%x) is not handled",
> > +			 ctrl->id, ctrl->val);
> 
> Please return an error; I'd do it instead of printing that.
> 

Okay.

> > +		break;
> > +	}
> > +
> > +	mutex_unlock(&imx290->lock);
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops imx290_ctrl_ops = {
> > +	.s_ctrl = imx290_set_ctrl,
> > +};
> > +
> > +static int imx290_enum_mbus_code(struct v4l2_subdev *sd,
> > +				 struct v4l2_subdev_pad_config *cfg,
> > +				 struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > +	if (code->index >= ARRAY_SIZE(imx290_formats))
> > +		return -EINVAL;
> > +
> > +	code->code = imx290_formats[code->index].code;
> > +
> > +	return 0;
> > +}
> > +
> > +static int imx290_get_fmt(struct v4l2_subdev *sd,
> > +			  struct v4l2_subdev_pad_config *cfg,
> > +			  struct v4l2_subdev_format *fmt)
> > +{
> > +	struct imx290 *imx290 = to_imx290(sd);
> > +	struct v4l2_mbus_framefmt *framefmt;
> > +
> > +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> > +		framefmt = v4l2_subdev_get_try_format(&imx290->sd, cfg,
> > +						      fmt->pad);
> > +	else
> > +		framefmt = &imx290->current_format;
> > +
> > +	fmt->format = *framefmt;
> > +
> > +	return 0;
> > +}
> > +
> > +static int imx290_set_fmt(struct v4l2_subdev *sd,
> > +			  struct v4l2_subdev_pad_config *cfg,
> > +		      struct v4l2_subdev_format *fmt)
> > +{
> > +	struct imx290 *imx290 = to_imx290(sd);
> > +	const struct imx290_mode *mode;
> > +	struct v4l2_mbus_framefmt *format;
> > +	int i, ret = 0;
> 
> Note that sub-device drivers need to serialise access through the uAPI to
> their own data.
> 

You mean guarding with mutex?

> > +
> > +	mode = v4l2_find_nearest_size(imx290_modes,
> > +				      ARRAY_SIZE(imx290_modes),
> > +				      width, height,
> > +				      fmt->format.width, fmt->format.height);
> > +
> > +	fmt->format.width = mode->width;
> > +	fmt->format.height = mode->height;
> > +
> > +	for (i = 0; i < ARRAY_SIZE(imx290_formats); i++)
> > +		if (imx290_formats[i].code == fmt->format.code)
> > +			break;
> > +
> > +	if (i >= ARRAY_SIZE(imx290_formats))
> > +		i = 0;
> > +
> > +	fmt->format.code = imx290_formats[i].code;
> > +	fmt->format.colorspace = imx290_formats[i].colorspace;
> > +	fmt->format.field = V4L2_FIELD_NONE;
> > +
> > +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> > +		format = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
> > +	} else {
> > +		format = &imx290->current_format;
> > +		__v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index);
> > +		__v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate, mode->pixel_rate);
> > +
> > +		imx290->current_mode = mode;
> > +	}
> > +
> > +	*format = fmt->format;
> > +
> > +	return ret;
> > +}
> > +
> > +static int imx290_entity_init_cfg(struct v4l2_subdev *subdev,
> > +				  struct v4l2_subdev_pad_config *cfg)
> > +{
> > +	struct v4l2_subdev_format fmt = { 0 };
> > +
> > +	fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> > +	fmt.format.width = 1920;
> > +	fmt.format.height = 1080;
> > +
> > +	imx290_set_fmt(subdev, cfg, &fmt);
> > +
> > +	return 0;
> > +}
> > +
> > +static int imx290_write_current_format(struct imx290 *imx290,
> > +				       struct v4l2_mbus_framefmt *format)
> > +{
> > +	int ret;
> > +
> > +	switch (format->code) {
> > +	case MEDIA_BUS_FMT_SRGGB10_1X10:
> > +		ret = imx290_set_register_array(imx290, imx290_10bit_settings,
> > +					ARRAY_SIZE(imx290_10bit_settings));
> > +		if (ret < 0) {
> > +			dev_err(imx290->dev, "Could not set format registers\n");
> > +			return ret;
> > +		}
> > +		break;
> > +	default:
> > +		dev_err(imx290->dev, "Unknown pixel format\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +/* Start streaming */
> > +static int imx290_start_streaming(struct imx290 *imx290)
> > +{
> > +	int ret;
> > +
> > +	/* Set current frame format */
> > +	ret = imx290_write_current_format(imx290, &imx290->current_format);
> > +	if (ret < 0) {
> > +		dev_err(imx290->dev, "Could not set frame format\n");
> > +		return ret;
> > +	}
> > +
> > +	/* Apply default values of current mode */
> > +	ret = imx290_set_register_array(imx290, imx290->current_mode->data,
> > +					imx290->current_mode->data_size);
> > +	if (ret < 0) {
> > +		dev_err(imx290->dev, "Could not set current mode\n");
> > +		return ret;
> > +	}
> > +
> > +	/* Apply customized values from user */
> > +	ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
> > +	if (ret) {
> > +		dev_err(imx290->dev, "Could not sync v4l2 controls\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x00);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	msleep(30);
> > +
> > +	/* Start streaming */
> > +	return imx290_write_reg(imx290, IMX290_XMSTA, 0x00);
> > +}
> > +
> > +static int imx290_set_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > +	struct imx290 *imx290 = to_imx290(sd);
> > +	int ret = 0;
> > +
> > +	if (enable)
> > +		ret = imx290_start_streaming(imx290);
> > +	else
> > +		imx290_stop_streaming(imx290);
> > +
> > +	return ret;
> > +}
> > +
> > +static int imx290_get_regulators(struct device *dev, struct imx290 *imx290)
> > +{
> > +	unsigned int i;
> > +
> > +	for (i = 0; i < IMX290_NUM_SUPPLIES; i++)
> > +		imx290->supplies[i].supply = imx290_supply_name[i];
> > +
> > +	return devm_regulator_bulk_get(dev, IMX290_NUM_SUPPLIES,
> > +				       imx290->supplies);
> > +}
> > +
> > +static const struct v4l2_subdev_core_ops imx290_subdev_core_ops = {
> > +	.s_power = imx290_s_power,
> > +};
> > +
> > +static const struct v4l2_subdev_video_ops imx290_video_ops = {
> > +	.s_stream = imx290_set_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_pad_ops imx290_pad_ops = {
> > +	.init_cfg = imx290_entity_init_cfg,
> > +	.enum_mbus_code = imx290_enum_mbus_code,
> > +	.get_fmt = imx290_get_fmt,
> > +	.set_fmt = imx290_set_fmt,
> > +};
> > +
> > +static const struct v4l2_subdev_ops imx290_subdev_ops = {
> > +	.core = &imx290_subdev_core_ops,
> > +	.video = &imx290_video_ops,
> > +	.pad = &imx290_pad_ops,
> > +};
> > +
> > +static const struct media_entity_operations imx290_subdev_entity_ops = {
> > +	.link_validate = v4l2_subdev_link_validate,
> > +};
> > +
> > +static int imx290_probe(struct i2c_client *client,
> > +			const struct i2c_device_id *id)
> > +{
> > +	struct device *dev = &client->dev;
> > +	struct fwnode_handle *endpoint;
> > +	struct imx290 *imx290;
> > +	u32 xclk_freq;
> > +	int ret;
> > +
> > +	imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL);
> > +	if (!imx290)
> > +		return -ENOMEM;
> > +
> > +	imx290->dev = dev;
> > +	imx290->regmap = devm_regmap_init_i2c(client, &imx290_regmap_config);
> > +	if (IS_ERR(imx290->regmap)) {
> > +		dev_err(dev, "Unable to initialize I2C\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
> > +	if (!endpoint) {
> > +		dev_err(dev, "Endpoint node not found\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	ret = v4l2_fwnode_endpoint_parse(endpoint, &imx290->ep);
> > +	fwnode_handle_put(endpoint);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Parsing endpoint node failed\n");
> > +		return ret;
> > +	}
> > +
> > +	/* Only CSI2 is supported for now */
> > +	if (imx290->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
> > +		dev_err(dev, "Unsupported bus type, should be CSI2\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	/* Set default mode to max resolution */
> > +	imx290->current_mode = &imx290_modes[0];
> > +
> > +	/* get system clock (xclk) */
> > +	imx290->xclk = devm_clk_get(dev, "xclk");
> > +	if (IS_ERR(imx290->xclk)) {
> > +		dev_err(dev, "Could not get xclk");
> > +		return PTR_ERR(imx290->xclk);
> > +	}
> > +
> > +	ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
> > +	if (ret) {
> > +		dev_err(dev, "Could not get xclk frequency\n");
> > +		return ret;
> > +	}
> > +
> > +	/* external clock must be 37.125 MHz */
> > +	if (xclk_freq != 37125000) {
> > +		dev_err(dev, "External clock frequency %u is not supported\n",
> > +			xclk_freq);
> > +		return -EINVAL;
> > +	}
> > +
> > +	ret = clk_set_rate(imx290->xclk, xclk_freq);
> > +	if (ret) {
> > +		dev_err(dev, "Could not set xclk frequency\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = imx290_get_regulators(dev, imx290);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Cannot get regulators\n");
> > +		return ret;
> > +	}
> > +
> > +	imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS);
> > +	if (IS_ERR(imx290->rst_gpio)) {
> > +		dev_err(dev, "Cannot get reset gpio\n");
> 
> Remember to put the regulators from now on. Or grab them later.
> 

Shouldn't that happen by default with devm_regulator* APIs?

> > +		return PTR_ERR(imx290->rst_gpio);
> > +	}
> > +
> > +	mutex_init(&imx290->lock);
> > +
> > +	v4l2_ctrl_handler_init(&imx290->ctrls, 3);
> > +
> > +	v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> > +			  V4L2_CID_GAIN, 0, 72, 1, 0);
> > +	imx290->link_freq = v4l2_ctrl_new_int_menu(&imx290->ctrls,
> > +					&imx290_ctrl_ops,
> > +					V4L2_CID_LINK_FREQ,
> > +					ARRAY_SIZE(imx290_link_freq) - 1,
> > +					0, imx290_link_freq);
> > +	if (imx290->link_freq)
> > +		imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > +	imx290->pixel_rate = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> > +					       V4L2_CID_PIXEL_RATE, 1,
> > +					       INT_MAX, 1,
> > +					       imx290_modes[0].pixel_rate);
> > +
> > +	imx290->sd.ctrl_handler = &imx290->ctrls;
> > +
> > +	if (imx290->ctrls.error) {
> > +		dev_err(dev, "Control initialization error %d\n",
> > +			imx290->ctrls.error);
> > +		ret = imx290->ctrls.error;
> > +		goto free_ctrl;
> > +	}
> > +
> > +	v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
> > +	imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > +	imx290->sd.dev = &client->dev;
> > +	imx290->sd.entity.ops = &imx290_subdev_entity_ops;
> > +	imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > +
> > +	imx290->pad.flags = MEDIA_PAD_FL_SOURCE;
> > +	ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Could not register media entity\n");
> > +		goto free_ctrl;
> > +	}
> > +
> > +	ret = v4l2_async_register_subdev(&imx290->sd);
> > +	if (ret < 0) {
> > +		dev_err(dev, "Could not register v4l2 device\n");
> > +		goto free_entity;
> > +	}
> > +
> > +	return 0;
> > +
> > +free_entity:
> > +	media_entity_cleanup(&imx290->sd.entity);
> > +free_ctrl:
> > +	v4l2_ctrl_handler_free(&imx290->ctrls);
> > +	mutex_destroy(&imx290->lock);
> > +
> > +	return ret;
> > +}
> > +
> > +static int imx290_remove(struct i2c_client *client)
> > +{
> > +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > +	struct imx290 *imx290 = to_imx290(sd);
> > +
> > +	v4l2_async_unregister_subdev(sd);
> > +	media_entity_cleanup(&sd->entity);
> > +	v4l2_ctrl_handler_free(sd->ctrl_handler);
> > +
> > +	imx290_set_power_off(imx290);
> > +	mutex_destroy(&imx290->lock);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id imx290_of_match[] = {
> > +	{ .compatible = "sony,imx290" },
> > +	{ /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, imx290_of_match);
> > +
> > +static struct i2c_driver imx290_i2c_driver = {
> > +	.probe  = imx290_probe,
> 
> Please use probe_new instead.
> 

Ack.

Thanks,
Mani

> > +	.remove = imx290_remove,
> > +	.driver = {
> > +		.name  = "imx290",
> > +		.of_match_table = of_match_ptr(imx290_of_match),
> > +	},
> > +};
> > +
> > +module_i2c_driver(imx290_i2c_driver);
> > +
> > +MODULE_DESCRIPTION("Sony IMX290 CMOS Image Sensor Driver");
> > +MODULE_AUTHOR("FRAMOS GmbH");
> > +MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
> > +MODULE_LICENSE("GPL v2");
> 
> -- 
> Kind regards,
> 
> Sakari Ailus
Sakari Ailus Aug. 29, 2019, 8:17 p.m. UTC | #3
Hi Manivannan,

On Thu, Aug 29, 2019 at 10:34:15PM +0530, Manivannan Sadhasivam wrote:

...

> > > +static int imx290_set_fmt(struct v4l2_subdev *sd,
> > > +			  struct v4l2_subdev_pad_config *cfg,
> > > +		      struct v4l2_subdev_format *fmt)
> > > +{
> > > +	struct imx290 *imx290 = to_imx290(sd);
> > > +	const struct imx290_mode *mode;
> > > +	struct v4l2_mbus_framefmt *format;
> > > +	int i, ret = 0;
> > 
> > Note that sub-device drivers need to serialise access through the uAPI to
> > their own data.
> > 
> 
> You mean guarding with mutex?

Yes, please.

...

> > > +static int imx290_get_regulators(struct device *dev, struct imx290 *imx290)
> > > +{
> > > +	unsigned int i;
> > > +
> > > +	for (i = 0; i < IMX290_NUM_SUPPLIES; i++)
> > > +		imx290->supplies[i].supply = imx290_supply_name[i];
> > > +
> > > +	return devm_regulator_bulk_get(dev, IMX290_NUM_SUPPLIES,
> > > +				       imx290->supplies);
> > > +}
> > > +

...

> > > +	ret = imx290_get_regulators(dev, imx290);
> > > +	if (ret < 0) {
> > > +		dev_err(dev, "Cannot get regulators\n");
> > > +		return ret;
> > > +	}
> > > +
> > > +	imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS);
> > > +	if (IS_ERR(imx290->rst_gpio)) {
> > > +		dev_err(dev, "Cannot get reset gpio\n");
> > 
> > Remember to put the regulators from now on. Or grab them later.
> > 
> 
> Shouldn't that happen by default with devm_regulator* APIs?

Ah, I missed you were using the devm variant. Please ignore the comment
then.
diff mbox series

Patch

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index cb8db944aa41..256edd289abe 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -594,6 +594,17 @@  config VIDEO_IMX274
 	  This is a V4L2 sensor driver for the Sony IMX274
 	  CMOS image sensor.
 
+config VIDEO_IMX290
+	tristate "Sony IMX290 sensor support"
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	depends on MEDIA_CAMERA_SUPPORT
+	help
+	  This is a Video4Linux2 sensor driver for the Sony
+	  IMX290 camera sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx290.
+
 config VIDEO_IMX319
 	tristate "Sony IMX319 sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index d8ad9dad495d..490e59070407 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -111,6 +111,7 @@  obj-$(CONFIG_VIDEO_TC358743)	+= tc358743.o
 obj-$(CONFIG_VIDEO_IMX214)	+= imx214.o
 obj-$(CONFIG_VIDEO_IMX258)	+= imx258.o
 obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
+obj-$(CONFIG_VIDEO_IMX290)	+= imx290.o
 obj-$(CONFIG_VIDEO_IMX319)	+= imx319.o
 obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
 obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
new file mode 100644
index 000000000000..8c50fbd51ca5
--- /dev/null
+++ b/drivers/media/i2c/imx290.c
@@ -0,0 +1,845 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sony IMX290 CMOS Image Sensor Driver
+ *
+ * Copyright (C) 2019 FRAMOS GmbH.
+ *
+ * Copyright (C) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define IMX290_STANDBY 0x3000
+#define IMX290_REGHOLD 0x3001
+#define IMX290_XMSTA 0x3002
+#define IMX290_GAIN 0x3014
+
+static const char * const imx290_supply_name[] = {
+	"vdda",
+	"vddd",
+	"vdddo",
+};
+
+#define IMX290_NUM_SUPPLIES ARRAY_SIZE(imx290_supply_name)
+
+struct imx290_regval {
+	u16 reg;
+	u8 val;
+};
+
+struct imx290_mode {
+	u32 width;
+	u32 height;
+	u32 pixel_rate;
+	u32 link_freq_index;
+
+	const struct imx290_regval *data;
+	u32 data_size;
+};
+
+struct imx290 {
+	struct device *dev;
+	struct clk *xclk;
+	struct regmap *regmap;
+
+	struct v4l2_subdev sd;
+	struct v4l2_fwnode_endpoint ep;
+	struct media_pad pad;
+	struct v4l2_mbus_framefmt current_format;
+	const struct imx290_mode *current_mode;
+
+	struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES];
+	struct gpio_desc *rst_gpio;
+
+	struct v4l2_ctrl_handler ctrls;
+	struct v4l2_ctrl *link_freq;
+	struct v4l2_ctrl *pixel_rate;
+
+	struct mutex lock;
+};
+
+struct imx290_pixfmt {
+	u32 code;
+	u32 colorspace;
+};
+
+static const struct imx290_pixfmt imx290_formats[] = {
+	{ MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_COLORSPACE_SRGB, },
+};
+
+static struct regmap_config imx290_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static const struct imx290_regval imx290_global_init_settings[] = {
+	{ 0x3007, 0x00 },
+	{ 0x3009, 0x00 },
+	{ 0x3018, 0x65 },
+	{ 0x3019, 0x04 },
+	{ 0x301a, 0x00 },
+	{ 0x3443, 0x03 },
+	{ 0x3444, 0x20 },
+	{ 0x3445, 0x25 },
+	{ 0x3407, 0x03 },
+	{ 0x303a, 0x0c },
+	{ 0x3040, 0x00 },
+	{ 0x3041, 0x00 },
+	{ 0x303c, 0x00 },
+	{ 0x303d, 0x00 },
+	{ 0x3042, 0x9c },
+	{ 0x3043, 0x07 },
+	{ 0x303e, 0x49 },
+	{ 0x303f, 0x04 },
+	{ 0x304b, 0x0a },
+	{ 0x300f, 0x00 },
+	{ 0x3010, 0x21 },
+	{ 0x3012, 0x64 },
+	{ 0x3016, 0x09 },
+	{ 0x3070, 0x02 },
+	{ 0x3071, 0x11 },
+	{ 0x309b, 0x10 },
+	{ 0x309c, 0x22 },
+	{ 0x30a2, 0x02 },
+	{ 0x30a6, 0x20 },
+	{ 0x30a8, 0x20 },
+	{ 0x30aa, 0x20 },
+	{ 0x30ac, 0x20 },
+	{ 0x30b0, 0x43 },
+	{ 0x3119, 0x9e },
+	{ 0x311c, 0x1e },
+	{ 0x311e, 0x08 },
+	{ 0x3128, 0x05 },
+	{ 0x313d, 0x83 },
+	{ 0x3150, 0x03 },
+	{ 0x317e, 0x00 },
+	{ 0x32b8, 0x50 },
+	{ 0x32b9, 0x10 },
+	{ 0x32ba, 0x00 },
+	{ 0x32bb, 0x04 },
+	{ 0x32c8, 0x50 },
+	{ 0x32c9, 0x10 },
+	{ 0x32ca, 0x00 },
+	{ 0x32cb, 0x04 },
+	{ 0x332c, 0xd3 },
+	{ 0x332d, 0x10 },
+	{ 0x332e, 0x0d },
+	{ 0x3358, 0x06 },
+	{ 0x3359, 0xe1 },
+	{ 0x335a, 0x11 },
+	{ 0x3360, 0x1e },
+	{ 0x3361, 0x61 },
+	{ 0x3362, 0x10 },
+	{ 0x33b0, 0x50 },
+	{ 0x33b2, 0x1a },
+	{ 0x33b3, 0x04 },
+};
+
+static const struct imx290_regval imx290_1080p_settings[] = {
+	/* mode settings */
+	{ 0x3007, 0x00 },
+	{ 0x303a, 0x0c },
+	{ 0x3414, 0x0a },
+	{ 0x3472, 0x80 },
+	{ 0x3473, 0x07 },
+	{ 0x3418, 0x38 },
+	{ 0x3419, 0x04 },
+	{ 0x3012, 0x64 },
+	{ 0x3013, 0x00 },
+	{ 0x305c, 0x18 },
+	{ 0x305d, 0x03 },
+	{ 0x305e, 0x20 },
+	{ 0x305f, 0x01 },
+	{ 0x315e, 0x1a },
+	{ 0x3164, 0x1a },
+	{ 0x3480, 0x49 },
+	/* data rate settings */
+	{ 0x3009, 0x01 },
+	{ 0x3405, 0x10 },
+	{ 0x3446, 0x57 },
+	{ 0x3447, 0x00 },
+	{ 0x3448, 0x37 },
+	{ 0x3449, 0x00 },
+	{ 0x344a, 0x1f },
+	{ 0x344b, 0x00 },
+	{ 0x344c, 0x1f },
+	{ 0x344d, 0x00 },
+	{ 0x344e, 0x1f },
+	{ 0x344f, 0x00 },
+	{ 0x3450, 0x77 },
+	{ 0x3451, 0x00 },
+	{ 0x3452, 0x1f },
+	{ 0x3453, 0x00 },
+	{ 0x3454, 0x17 },
+	{ 0x3455, 0x00 },
+	{ 0x301c, 0x98 },
+	{ 0x301d, 0x08 },
+};
+
+static const struct imx290_regval imx290_720p_settings[] = {
+	/* mode settings */
+	{ 0x3007, 0x10 },
+	{ 0x303a, 0x06 },
+	{ 0x3414, 0x04 },
+	{ 0x3472, 0x00 },
+	{ 0x3473, 0x05 },
+	{ 0x3418, 0xd0 },
+	{ 0x3419, 0x02 },
+	{ 0x3012, 0x64 },
+	{ 0x3013, 0x00 },
+	{ 0x305c, 0x20 },
+	{ 0x305d, 0x00 },
+	{ 0x305e, 0x20 },
+	{ 0x305f, 0x01 },
+	{ 0x315e, 0x1a },
+	{ 0x3164, 0x1a },
+	{ 0x3480, 0x49 },
+	/* data rate settings */
+	{ 0x3009, 0x01 },
+	{ 0x3405, 0x10 },
+	{ 0x3446, 0x4f },
+	{ 0x3447, 0x00 },
+	{ 0x3448, 0x2f },
+	{ 0x3449, 0x00 },
+	{ 0x344a, 0x17 },
+	{ 0x344b, 0x00 },
+	{ 0x344c, 0x17 },
+	{ 0x344d, 0x00 },
+	{ 0x344e, 0x17 },
+	{ 0x344f, 0x00 },
+	{ 0x3450, 0x57 },
+	{ 0x3451, 0x00 },
+	{ 0x3452, 0x17 },
+	{ 0x3453, 0x00 },
+	{ 0x3454, 0x17 },
+	{ 0x3455, 0x00 },
+	{ 0x301c, 0xe4 },
+	{ 0x301d, 0x0c },
+};
+
+static const struct imx290_regval imx290_10bit_settings[] = {
+	{ 0x3005, 0x00},
+	{ 0x3046, 0x00},
+	{ 0x3129, 0x1d},
+	{ 0x317c, 0x12},
+	{ 0x31ec, 0x37},
+	{ 0x3441, 0x0a},
+	{ 0x3442, 0x0a},
+	{ 0x300a, 0x3c},
+	{ 0x300b, 0x00},
+};
+
+/* supported link frequencies */
+static const s64 imx290_link_freq[] = {
+	445500000,
+};
+
+/* Mode configs */
+static const struct imx290_mode imx290_modes[] = {
+	{
+		.width = 1920,
+		.height = 1080,
+		.data = imx290_1080p_settings,
+		.data_size = ARRAY_SIZE(imx290_1080p_settings),
+		.pixel_rate = 178200000,
+		.link_freq_index = 0,
+	},
+	{
+		.width = 1280,
+		.height = 720,
+		.data = imx290_720p_settings,
+		.data_size = ARRAY_SIZE(imx290_720p_settings),
+		.pixel_rate = 178200000,
+		.link_freq_index = 0,
+	},
+};
+
+static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd)
+{
+	return container_of(_sd, struct imx290, sd);
+}
+
+static inline int imx290_read_reg(struct imx290 *imx290, u16 addr, u8 *value)
+{
+	u32 regval;
+	int ret;
+
+	ret = regmap_read(imx290->regmap, addr, &regval);
+	if (ret) {
+		dev_err(imx290->dev, "I2C read failed for addr: %x\n", addr);
+		return ret;
+	}
+
+	*value = regval & 0xFF;
+
+	return 0;
+}
+
+static int imx290_write_reg(struct imx290 *imx290, u16 addr, u8 value)
+{
+	int ret;
+
+	ret = regmap_write(imx290->regmap, addr, value);
+	if (ret) {
+		dev_err(imx290->dev, "I2C write failed for addr: %x\n", addr);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int imx290_set_register_array(struct imx290 *imx290,
+				     const struct imx290_regval *settings,
+				     unsigned int num_settings)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < num_settings; ++i, ++settings) {
+		ret = imx290_write_reg(imx290, settings->reg, settings->val);
+		if (ret < 0)
+			return ret;
+
+		/* Settle time is 10ms for all registers */
+		msleep(10);
+	}
+
+	return 0;
+}
+
+static int imx290_write_buffered_reg(struct imx290 *imx290, u16 address_low,
+				     u8 nr_regs, u32 value)
+{
+	int ret, i;
+	u8 val = 0;
+
+	ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x01);
+	if (ret) {
+		dev_err(imx290->dev, "Error setting hold register\n");
+		return ret;
+	}
+
+	for (i = 0; i < nr_regs; i++) {
+		imx290_read_reg(imx290, address_low + i, &val);
+		ret = imx290_write_reg(imx290, address_low + i,
+				       (u8)(value >> (i * 8)));
+		if (ret) {
+			dev_err(imx290->dev, "Error writing buffered registers\n");
+			return ret;
+		}
+		imx290_read_reg(imx290, address_low + i, &val);
+	}
+
+	ret = imx290_write_reg(imx290, IMX290_REGHOLD, 0x00);
+	if (ret) {
+		dev_err(imx290->dev, "Error setting hold register\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static int imx290_set_gain(struct imx290 *imx290, u32 value)
+{
+	int ret;
+
+	u32 adjusted_value = (value * 10) / 3;
+
+	ret = imx290_write_buffered_reg(imx290, IMX290_GAIN, 1, adjusted_value);
+	if (ret)
+		dev_err(imx290->dev, "Unable to write gain\n");
+
+	return ret;
+}
+
+static int imx290_set_power_on(struct imx290 *imx290)
+{
+	int ret;
+
+	ret = clk_prepare_enable(imx290->xclk);
+	if (ret) {
+		dev_err(imx290->dev, "Failed to enable clock\n");
+		return ret;
+	}
+
+	ret = regulator_bulk_enable(IMX290_NUM_SUPPLIES,
+				    imx290->supplies);
+	if (ret) {
+		dev_err(imx290->dev, "Failed to enable regulators\n");
+		goto xclk_off;
+	}
+
+	usleep_range(1, 2);
+	gpiod_set_value_cansleep(imx290->rst_gpio, 1);
+	usleep_range(30000, 31000);
+
+	return 0;
+
+xclk_off:
+	clk_disable_unprepare(imx290->xclk);
+	return ret;
+}
+
+/* Stop streaming */
+static int imx290_stop_streaming(struct imx290 *imx290)
+{
+	int ret;
+
+	ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x01);
+	if (ret < 0)
+		return ret;
+
+	msleep(30);
+
+	return imx290_write_reg(imx290, IMX290_XMSTA, 0x01);
+}
+
+static void imx290_set_power_off(struct imx290 *imx290)
+{
+	clk_disable_unprepare(imx290->xclk);
+	gpiod_set_value_cansleep(imx290->rst_gpio, 0);
+	regulator_bulk_disable(IMX290_NUM_SUPPLIES, imx290->supplies);
+}
+
+static int imx290_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct imx290 *imx290 = to_imx290(sd);
+	int ret = 0;
+
+	mutex_lock(&imx290->lock);
+
+	if (on) {
+		ret = imx290_set_power_on(imx290);
+		if (ret < 0)
+			goto exit;
+
+		ret = imx290_set_register_array(imx290,
+				imx290_global_init_settings,
+				ARRAY_SIZE(imx290_global_init_settings));
+		if (ret < 0) {
+			dev_err(imx290->dev,
+				"Could not set init registers\n");
+			imx290_set_power_off(imx290);
+			goto exit;
+		}
+
+		imx290_stop_streaming(imx290);
+	} else {
+		imx290_set_power_off(imx290);
+	}
+
+exit:
+	mutex_unlock(&imx290->lock);
+
+	return ret;
+}
+
+static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct imx290 *imx290 = container_of(ctrl->handler,
+					     struct imx290, ctrls);
+	int ret = 0;
+
+	mutex_lock(&imx290->lock);
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		ret = imx290_set_gain(imx290, ctrl->val);
+		break;
+	default:
+		dev_info(imx290->dev, "ctrl(id:0x%x,val:0x%x) is not handled",
+			 ctrl->id, ctrl->val);
+		break;
+	}
+
+	mutex_unlock(&imx290->lock);
+
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops imx290_ctrl_ops = {
+	.s_ctrl = imx290_set_ctrl,
+};
+
+static int imx290_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_pad_config *cfg,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->index >= ARRAY_SIZE(imx290_formats))
+		return -EINVAL;
+
+	code->code = imx290_formats[code->index].code;
+
+	return 0;
+}
+
+static int imx290_get_fmt(struct v4l2_subdev *sd,
+			  struct v4l2_subdev_pad_config *cfg,
+			  struct v4l2_subdev_format *fmt)
+{
+	struct imx290 *imx290 = to_imx290(sd);
+	struct v4l2_mbus_framefmt *framefmt;
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+		framefmt = v4l2_subdev_get_try_format(&imx290->sd, cfg,
+						      fmt->pad);
+	else
+		framefmt = &imx290->current_format;
+
+	fmt->format = *framefmt;
+
+	return 0;
+}
+
+static int imx290_set_fmt(struct v4l2_subdev *sd,
+			  struct v4l2_subdev_pad_config *cfg,
+		      struct v4l2_subdev_format *fmt)
+{
+	struct imx290 *imx290 = to_imx290(sd);
+	const struct imx290_mode *mode;
+	struct v4l2_mbus_framefmt *format;
+	int i, ret = 0;
+
+	mode = v4l2_find_nearest_size(imx290_modes,
+				      ARRAY_SIZE(imx290_modes),
+				      width, height,
+				      fmt->format.width, fmt->format.height);
+
+	fmt->format.width = mode->width;
+	fmt->format.height = mode->height;
+
+	for (i = 0; i < ARRAY_SIZE(imx290_formats); i++)
+		if (imx290_formats[i].code == fmt->format.code)
+			break;
+
+	if (i >= ARRAY_SIZE(imx290_formats))
+		i = 0;
+
+	fmt->format.code = imx290_formats[i].code;
+	fmt->format.colorspace = imx290_formats[i].colorspace;
+	fmt->format.field = V4L2_FIELD_NONE;
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+		format = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
+	} else {
+		format = &imx290->current_format;
+		__v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index);
+		__v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate, mode->pixel_rate);
+
+		imx290->current_mode = mode;
+	}
+
+	*format = fmt->format;
+
+	return ret;
+}
+
+static int imx290_entity_init_cfg(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_pad_config *cfg)
+{
+	struct v4l2_subdev_format fmt = { 0 };
+
+	fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+	fmt.format.width = 1920;
+	fmt.format.height = 1080;
+
+	imx290_set_fmt(subdev, cfg, &fmt);
+
+	return 0;
+}
+
+static int imx290_write_current_format(struct imx290 *imx290,
+				       struct v4l2_mbus_framefmt *format)
+{
+	int ret;
+
+	switch (format->code) {
+	case MEDIA_BUS_FMT_SRGGB10_1X10:
+		ret = imx290_set_register_array(imx290, imx290_10bit_settings,
+					ARRAY_SIZE(imx290_10bit_settings));
+		if (ret < 0) {
+			dev_err(imx290->dev, "Could not set format registers\n");
+			return ret;
+		}
+		break;
+	default:
+		dev_err(imx290->dev, "Unknown pixel format\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Start streaming */
+static int imx290_start_streaming(struct imx290 *imx290)
+{
+	int ret;
+
+	/* Set current frame format */
+	ret = imx290_write_current_format(imx290, &imx290->current_format);
+	if (ret < 0) {
+		dev_err(imx290->dev, "Could not set frame format\n");
+		return ret;
+	}
+
+	/* Apply default values of current mode */
+	ret = imx290_set_register_array(imx290, imx290->current_mode->data,
+					imx290->current_mode->data_size);
+	if (ret < 0) {
+		dev_err(imx290->dev, "Could not set current mode\n");
+		return ret;
+	}
+
+	/* Apply customized values from user */
+	ret = v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler);
+	if (ret) {
+		dev_err(imx290->dev, "Could not sync v4l2 controls\n");
+		return ret;
+	}
+
+	ret = imx290_write_reg(imx290, IMX290_STANDBY, 0x00);
+	if (ret < 0)
+		return ret;
+
+	msleep(30);
+
+	/* Start streaming */
+	return imx290_write_reg(imx290, IMX290_XMSTA, 0x00);
+}
+
+static int imx290_set_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct imx290 *imx290 = to_imx290(sd);
+	int ret = 0;
+
+	if (enable)
+		ret = imx290_start_streaming(imx290);
+	else
+		imx290_stop_streaming(imx290);
+
+	return ret;
+}
+
+static int imx290_get_regulators(struct device *dev, struct imx290 *imx290)
+{
+	unsigned int i;
+
+	for (i = 0; i < IMX290_NUM_SUPPLIES; i++)
+		imx290->supplies[i].supply = imx290_supply_name[i];
+
+	return devm_regulator_bulk_get(dev, IMX290_NUM_SUPPLIES,
+				       imx290->supplies);
+}
+
+static const struct v4l2_subdev_core_ops imx290_subdev_core_ops = {
+	.s_power = imx290_s_power,
+};
+
+static const struct v4l2_subdev_video_ops imx290_video_ops = {
+	.s_stream = imx290_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx290_pad_ops = {
+	.init_cfg = imx290_entity_init_cfg,
+	.enum_mbus_code = imx290_enum_mbus_code,
+	.get_fmt = imx290_get_fmt,
+	.set_fmt = imx290_set_fmt,
+};
+
+static const struct v4l2_subdev_ops imx290_subdev_ops = {
+	.core = &imx290_subdev_core_ops,
+	.video = &imx290_video_ops,
+	.pad = &imx290_pad_ops,
+};
+
+static const struct media_entity_operations imx290_subdev_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static int imx290_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct fwnode_handle *endpoint;
+	struct imx290 *imx290;
+	u32 xclk_freq;
+	int ret;
+
+	imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL);
+	if (!imx290)
+		return -ENOMEM;
+
+	imx290->dev = dev;
+	imx290->regmap = devm_regmap_init_i2c(client, &imx290_regmap_config);
+	if (IS_ERR(imx290->regmap)) {
+		dev_err(dev, "Unable to initialize I2C\n");
+		return -ENODEV;
+	}
+
+	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
+	if (!endpoint) {
+		dev_err(dev, "Endpoint node not found\n");
+		return -EINVAL;
+	}
+
+	ret = v4l2_fwnode_endpoint_parse(endpoint, &imx290->ep);
+	fwnode_handle_put(endpoint);
+	if (ret < 0) {
+		dev_err(dev, "Parsing endpoint node failed\n");
+		return ret;
+	}
+
+	/* Only CSI2 is supported for now */
+	if (imx290->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
+		dev_err(dev, "Unsupported bus type, should be CSI2\n");
+		return -EINVAL;
+	}
+
+	/* Set default mode to max resolution */
+	imx290->current_mode = &imx290_modes[0];
+
+	/* get system clock (xclk) */
+	imx290->xclk = devm_clk_get(dev, "xclk");
+	if (IS_ERR(imx290->xclk)) {
+		dev_err(dev, "Could not get xclk");
+		return PTR_ERR(imx290->xclk);
+	}
+
+	ret = of_property_read_u32(dev->of_node, "clock-frequency", &xclk_freq);
+	if (ret) {
+		dev_err(dev, "Could not get xclk frequency\n");
+		return ret;
+	}
+
+	/* external clock must be 37.125 MHz */
+	if (xclk_freq != 37125000) {
+		dev_err(dev, "External clock frequency %u is not supported\n",
+			xclk_freq);
+		return -EINVAL;
+	}
+
+	ret = clk_set_rate(imx290->xclk, xclk_freq);
+	if (ret) {
+		dev_err(dev, "Could not set xclk frequency\n");
+		return ret;
+	}
+
+	ret = imx290_get_regulators(dev, imx290);
+	if (ret < 0) {
+		dev_err(dev, "Cannot get regulators\n");
+		return ret;
+	}
+
+	imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS);
+	if (IS_ERR(imx290->rst_gpio)) {
+		dev_err(dev, "Cannot get reset gpio\n");
+		return PTR_ERR(imx290->rst_gpio);
+	}
+
+	mutex_init(&imx290->lock);
+
+	v4l2_ctrl_handler_init(&imx290->ctrls, 3);
+
+	v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
+			  V4L2_CID_GAIN, 0, 72, 1, 0);
+	imx290->link_freq = v4l2_ctrl_new_int_menu(&imx290->ctrls,
+					&imx290_ctrl_ops,
+					V4L2_CID_LINK_FREQ,
+					ARRAY_SIZE(imx290_link_freq) - 1,
+					0, imx290_link_freq);
+	if (imx290->link_freq)
+		imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	imx290->pixel_rate = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
+					       V4L2_CID_PIXEL_RATE, 1,
+					       INT_MAX, 1,
+					       imx290_modes[0].pixel_rate);
+
+	imx290->sd.ctrl_handler = &imx290->ctrls;
+
+	if (imx290->ctrls.error) {
+		dev_err(dev, "Control initialization error %d\n",
+			imx290->ctrls.error);
+		ret = imx290->ctrls.error;
+		goto free_ctrl;
+	}
+
+	v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops);
+	imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	imx290->sd.dev = &client->dev;
+	imx290->sd.entity.ops = &imx290_subdev_entity_ops;
+	imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+	imx290->pad.flags = MEDIA_PAD_FL_SOURCE;
+	ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad);
+	if (ret < 0) {
+		dev_err(dev, "Could not register media entity\n");
+		goto free_ctrl;
+	}
+
+	ret = v4l2_async_register_subdev(&imx290->sd);
+	if (ret < 0) {
+		dev_err(dev, "Could not register v4l2 device\n");
+		goto free_entity;
+	}
+
+	return 0;
+
+free_entity:
+	media_entity_cleanup(&imx290->sd.entity);
+free_ctrl:
+	v4l2_ctrl_handler_free(&imx290->ctrls);
+	mutex_destroy(&imx290->lock);
+
+	return ret;
+}
+
+static int imx290_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct imx290 *imx290 = to_imx290(sd);
+
+	v4l2_async_unregister_subdev(sd);
+	media_entity_cleanup(&sd->entity);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
+
+	imx290_set_power_off(imx290);
+	mutex_destroy(&imx290->lock);
+
+	return 0;
+}
+
+static const struct of_device_id imx290_of_match[] = {
+	{ .compatible = "sony,imx290" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx290_of_match);
+
+static struct i2c_driver imx290_i2c_driver = {
+	.probe  = imx290_probe,
+	.remove = imx290_remove,
+	.driver = {
+		.name  = "imx290",
+		.of_match_table = of_match_ptr(imx290_of_match),
+	},
+};
+
+module_i2c_driver(imx290_i2c_driver);
+
+MODULE_DESCRIPTION("Sony IMX290 CMOS Image Sensor Driver");
+MODULE_AUTHOR("FRAMOS GmbH");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_LICENSE("GPL v2");