[1/9] remoteproc: qcom: Introduce driver to store pil info in IMEM
diff mbox series

Message ID 20190807053942.9836-2-bjorn.andersson@linaro.org
State New
Headers show
Series
  • remoteproc: qcom: post mortem debug support
Related show

Commit Message

Bjorn Andersson Aug. 7, 2019, 5:39 a.m. UTC
A region in IMEM is used to communicate load addresses of remoteproc to
post mortem debug tools. Implement a driver that can be used to store
this information in order to enable these tools to process collected
ramdumps.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/remoteproc/Kconfig         |   3 +
 drivers/remoteproc/Makefile        |   1 +
 drivers/remoteproc/qcom_pil_info.c | 139 +++++++++++++++++++++++++++++
 drivers/remoteproc/qcom_pil_info.h |   6 ++
 4 files changed, 149 insertions(+)
 create mode 100644 drivers/remoteproc/qcom_pil_info.c
 create mode 100644 drivers/remoteproc/qcom_pil_info.h

Comments

Suman Anna Aug. 7, 2019, 7:19 p.m. UTC | #1
On 8/7/19 12:39 AM, Bjorn Andersson wrote:
> A region in IMEM is used to communicate load addresses of remoteproc to
> post mortem debug tools. Implement a driver that can be used to store
> this information in order to enable these tools to process collected
> ramdumps.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  drivers/remoteproc/Kconfig         |   3 +
>  drivers/remoteproc/Makefile        |   1 +
>  drivers/remoteproc/qcom_pil_info.c | 139 +++++++++++++++++++++++++++++
>  drivers/remoteproc/qcom_pil_info.h |   6 ++
>  4 files changed, 149 insertions(+)
>  create mode 100644 drivers/remoteproc/qcom_pil_info.c
>  create mode 100644 drivers/remoteproc/qcom_pil_info.h
> 
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 28ed306982f7..3984bd16e670 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -85,6 +85,9 @@ config KEYSTONE_REMOTEPROC
>  	  It's safe to say N here if you're not interested in the Keystone
>  	  DSPs or just want to use a bare minimum kernel.
>  
> +config QCOM_PIL_INFO
> +	tristate
> +
>  config QCOM_RPROC_COMMON
>  	tristate
>  
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index 00f09e658cb3..c1b46e9033cb 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_OMAP_REMOTEPROC)		+= omap_remoteproc.o
>  obj-$(CONFIG_WKUP_M3_RPROC)		+= wkup_m3_rproc.o
>  obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
>  obj-$(CONFIG_KEYSTONE_REMOTEPROC)	+= keystone_remoteproc.o
> +obj-$(CONFIG_QCOM_PIL_INFO)		+= qcom_pil_info.o
>  obj-$(CONFIG_QCOM_RPROC_COMMON)		+= qcom_common.o
>  obj-$(CONFIG_QCOM_Q6V5_COMMON)		+= qcom_q6v5.o
>  obj-$(CONFIG_QCOM_Q6V5_ADSP)		+= qcom_q6v5_adsp.o
> diff --git a/drivers/remoteproc/qcom_pil_info.c b/drivers/remoteproc/qcom_pil_info.c
> new file mode 100644
> index 000000000000..aa42732016f3
> --- /dev/null
> +++ b/drivers/remoteproc/qcom_pil_info.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2019 Linaro Ltd.
> + */
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/mutex.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/slab.h>
> +
> +struct pil_reloc_entry {
> +	char name[8];
> +	__le64 base;
> +	__le32 size;
> +} __packed;
> +
> +#define PIL_INFO_SIZE	200
> +#define PIL_INFO_ENTRIES (PIL_INFO_SIZE / sizeof(struct pil_reloc_entry))
> +
> +struct pil_reloc {
> +	struct device *dev;
> +	struct regmap *map;
> +	u32 offset;
> +	int val_bytes;
> +
> +	struct pil_reloc_entry entries[PIL_INFO_ENTRIES];
> +};
> +
> +static struct pil_reloc *_reloc;
> +static DEFINE_MUTEX(reloc_mutex);
> +
> +/**
> + * qcom_pil_info_store() - store PIL information of image in IMEM
> + * @image:	name of the image
> + * @base:	base address of the loaded image
> + * @size:	size of the loaded image
> + */
> +void qcom_pil_info_store(const char *image, phys_addr_t base, size_t size)
> +{
> +	struct pil_reloc_entry *entry;
> +	int idx = -1;
> +	int i;
> +
> +	mutex_lock(&reloc_mutex);
> +	if (!_reloc)
> +		goto unlock;
> +
> +	for (i = 0; i < PIL_INFO_ENTRIES; i++) {
> +		if (!_reloc->entries[i].name[0]) {
> +			if (idx == -1)
> +				idx = i;
> +			continue;
> +		}
> +
> +		if (!strncmp(_reloc->entries[i].name, image, 8)) {
> +			idx = i;
> +			goto found;
> +		}
> +	}
> +
> +	if (idx) {
> +		dev_warn(_reloc->dev, "insufficient PIL info slots\n");
> +		goto unlock;
> +	}
> +
> +found:
> +	entry = &_reloc->entries[idx];
> +	stracpy(entry->name, image);
> +	entry->base = base;
> +	entry->size = size;
> +
> +	regmap_bulk_write(_reloc->map, _reloc->offset + idx * sizeof(*entry),
> +			  entry, sizeof(*entry) / _reloc->val_bytes);
> +
> +unlock:
> +	mutex_unlock(&reloc_mutex);
> +}
> +EXPORT_SYMBOL_GPL(qcom_pil_info_store);
> +
> +static int pil_reloc_probe(struct platform_device *pdev)
> +{
> +	struct pil_reloc *reloc;
> +
> +	reloc = devm_kzalloc(&pdev->dev, sizeof(*reloc), GFP_KERNEL);
> +	if (!reloc)
> +		return -ENOMEM;
> +
> +	reloc->dev = &pdev->dev;
> +	reloc->map = syscon_node_to_regmap(pdev->dev.parent->of_node);
> +	if (IS_ERR(reloc->map))
> +		return PTR_ERR(reloc->map);
> +
> +	if (of_property_read_u32(pdev->dev.of_node, "offset", &reloc->offset))
> +		return -EINVAL;
> +
> +	reloc->val_bytes = regmap_get_val_bytes(reloc->map);
> +	if (reloc->val_bytes < 0)
> +		return -EINVAL;
> +
> +	regmap_bulk_write(reloc->map, reloc->offset, reloc->entries,
> +			  sizeof(reloc->entries) / reloc->val_bytes);
> +
> +	mutex_lock(&reloc_mutex);
> +	_reloc = reloc;
> +	mutex_unlock(&reloc_mutex);
> +
> +	return 0;
> +}
> +
> +static int pil_reloc_remove(struct platform_device *pdev)
> +{
> +	mutex_lock(&reloc_mutex);
> +	_reloc = NULL;
> +	mutex_unlock(&reloc_mutex);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id pil_reloc_of_match[] = {
> +	{ .compatible = "qcom,pil-reloc-info" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, pil_reloc_of_match);
> +
> +static struct platform_driver pil_reloc_driver = {
> +	.probe = pil_reloc_probe,
> +	.remove = pil_reloc_remove,
> +	.driver = {
> +		.name = "qcom-pil-reloc-info",
> +		.of_match_table = pil_reloc_of_match,
> +	},
> +};
> +module_platform_driver(pil_reloc_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm PIL relocation info");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/remoteproc/qcom_pil_info.h b/drivers/remoteproc/qcom_pil_info.h
> new file mode 100644
> index 000000000000..c30c186b665d
> --- /dev/null
> +++ b/drivers/remoteproc/qcom_pil_info.h
> @@ -0,0 +1,6 @@

Please add a SPDX license identifier.

regards
Suman

> +#ifndef __QCOM_PIL_INFO_H__
> +#define __QCOM_PIL_INFO_H__
> +
> +void qcom_pil_info_store(const char *image, phys_addr_t base, size_t size);
> +
> +#endif
>

Patch
diff mbox series

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 28ed306982f7..3984bd16e670 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -85,6 +85,9 @@  config KEYSTONE_REMOTEPROC
 	  It's safe to say N here if you're not interested in the Keystone
 	  DSPs or just want to use a bare minimum kernel.
 
+config QCOM_PIL_INFO
+	tristate
+
 config QCOM_RPROC_COMMON
 	tristate
 
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 00f09e658cb3..c1b46e9033cb 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -14,6 +14,7 @@  obj-$(CONFIG_OMAP_REMOTEPROC)		+= omap_remoteproc.o
 obj-$(CONFIG_WKUP_M3_RPROC)		+= wkup_m3_rproc.o
 obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
 obj-$(CONFIG_KEYSTONE_REMOTEPROC)	+= keystone_remoteproc.o
+obj-$(CONFIG_QCOM_PIL_INFO)		+= qcom_pil_info.o
 obj-$(CONFIG_QCOM_RPROC_COMMON)		+= qcom_common.o
 obj-$(CONFIG_QCOM_Q6V5_COMMON)		+= qcom_q6v5.o
 obj-$(CONFIG_QCOM_Q6V5_ADSP)		+= qcom_q6v5_adsp.o
diff --git a/drivers/remoteproc/qcom_pil_info.c b/drivers/remoteproc/qcom_pil_info.c
new file mode 100644
index 000000000000..aa42732016f3
--- /dev/null
+++ b/drivers/remoteproc/qcom_pil_info.c
@@ -0,0 +1,139 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2019 Linaro Ltd.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+struct pil_reloc_entry {
+	char name[8];
+	__le64 base;
+	__le32 size;
+} __packed;
+
+#define PIL_INFO_SIZE	200
+#define PIL_INFO_ENTRIES (PIL_INFO_SIZE / sizeof(struct pil_reloc_entry))
+
+struct pil_reloc {
+	struct device *dev;
+	struct regmap *map;
+	u32 offset;
+	int val_bytes;
+
+	struct pil_reloc_entry entries[PIL_INFO_ENTRIES];
+};
+
+static struct pil_reloc *_reloc;
+static DEFINE_MUTEX(reloc_mutex);
+
+/**
+ * qcom_pil_info_store() - store PIL information of image in IMEM
+ * @image:	name of the image
+ * @base:	base address of the loaded image
+ * @size:	size of the loaded image
+ */
+void qcom_pil_info_store(const char *image, phys_addr_t base, size_t size)
+{
+	struct pil_reloc_entry *entry;
+	int idx = -1;
+	int i;
+
+	mutex_lock(&reloc_mutex);
+	if (!_reloc)
+		goto unlock;
+
+	for (i = 0; i < PIL_INFO_ENTRIES; i++) {
+		if (!_reloc->entries[i].name[0]) {
+			if (idx == -1)
+				idx = i;
+			continue;
+		}
+
+		if (!strncmp(_reloc->entries[i].name, image, 8)) {
+			idx = i;
+			goto found;
+		}
+	}
+
+	if (idx) {
+		dev_warn(_reloc->dev, "insufficient PIL info slots\n");
+		goto unlock;
+	}
+
+found:
+	entry = &_reloc->entries[idx];
+	stracpy(entry->name, image);
+	entry->base = base;
+	entry->size = size;
+
+	regmap_bulk_write(_reloc->map, _reloc->offset + idx * sizeof(*entry),
+			  entry, sizeof(*entry) / _reloc->val_bytes);
+
+unlock:
+	mutex_unlock(&reloc_mutex);
+}
+EXPORT_SYMBOL_GPL(qcom_pil_info_store);
+
+static int pil_reloc_probe(struct platform_device *pdev)
+{
+	struct pil_reloc *reloc;
+
+	reloc = devm_kzalloc(&pdev->dev, sizeof(*reloc), GFP_KERNEL);
+	if (!reloc)
+		return -ENOMEM;
+
+	reloc->dev = &pdev->dev;
+	reloc->map = syscon_node_to_regmap(pdev->dev.parent->of_node);
+	if (IS_ERR(reloc->map))
+		return PTR_ERR(reloc->map);
+
+	if (of_property_read_u32(pdev->dev.of_node, "offset", &reloc->offset))
+		return -EINVAL;
+
+	reloc->val_bytes = regmap_get_val_bytes(reloc->map);
+	if (reloc->val_bytes < 0)
+		return -EINVAL;
+
+	regmap_bulk_write(reloc->map, reloc->offset, reloc->entries,
+			  sizeof(reloc->entries) / reloc->val_bytes);
+
+	mutex_lock(&reloc_mutex);
+	_reloc = reloc;
+	mutex_unlock(&reloc_mutex);
+
+	return 0;
+}
+
+static int pil_reloc_remove(struct platform_device *pdev)
+{
+	mutex_lock(&reloc_mutex);
+	_reloc = NULL;
+	mutex_unlock(&reloc_mutex);
+
+	return 0;
+}
+
+static const struct of_device_id pil_reloc_of_match[] = {
+	{ .compatible = "qcom,pil-reloc-info" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pil_reloc_of_match);
+
+static struct platform_driver pil_reloc_driver = {
+	.probe = pil_reloc_probe,
+	.remove = pil_reloc_remove,
+	.driver = {
+		.name = "qcom-pil-reloc-info",
+		.of_match_table = pil_reloc_of_match,
+	},
+};
+module_platform_driver(pil_reloc_driver);
+
+MODULE_DESCRIPTION("Qualcomm PIL relocation info");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/remoteproc/qcom_pil_info.h b/drivers/remoteproc/qcom_pil_info.h
new file mode 100644
index 000000000000..c30c186b665d
--- /dev/null
+++ b/drivers/remoteproc/qcom_pil_info.h
@@ -0,0 +1,6 @@ 
+#ifndef __QCOM_PIL_INFO_H__
+#define __QCOM_PIL_INFO_H__
+
+void qcom_pil_info_store(const char *image, phys_addr_t base, size_t size);
+
+#endif