diff mbox series

ARM: debug-ll: Add support for r7s9210

Message ID 20190807085415.24854-1-geert+renesas@glider.be (mailing list archive)
State New, archived
Headers show
Series ARM: debug-ll: Add support for r7s9210 | expand

Commit Message

Geert Uytterhoeven Aug. 7, 2019, 8:54 a.m. UTC
Enable low-level debugging support for RZ/A2M (r7s9210).

The RZA2MEVB board uses either SCIF2 (SDRAM enabled) or SCIF4 (HyperRAM
only) for the serial console.

Note that "SCIFA" serial ports on RZ/A2 SoCs use a compressed register
layout, hence add support for that to renesas-scif.S.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/Kconfig.debug                | 20 +++++++++++++++++++-
 arch/arm/include/debug/renesas-scif.S |  6 +++++-
 2 files changed, 24 insertions(+), 2 deletions(-)

Comments

Simon Horman Aug. 21, 2019, 9:06 a.m. UTC | #1
On Wed, Aug 07, 2019 at 10:54:15AM +0200, Geert Uytterhoeven wrote:
> Enable low-level debugging support for RZ/A2M (r7s9210).
> 
> The RZA2MEVB board uses either SCIF2 (SDRAM enabled) or SCIF4 (HyperRAM
> only) for the serial console.
> 
> Note that "SCIFA" serial ports on RZ/A2 SoCs use a compressed register
> layout, hence add support for that to renesas-scif.S.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> ---
>  arch/arm/Kconfig.debug                | 20 +++++++++++++++++++-
>  arch/arm/include/debug/renesas-scif.S |  6 +++++-
>  2 files changed, 24 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index 85710e078afb4878..9fe038aecc553deb 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -924,6 +924,20 @@ choice
>  		  Say Y here if you want kernel low-level debugging support
>  		  via SCIF2 on Renesas RZ/A1H (R7S72100).
>  
> +	config DEBUG_R7S9210_SCIF2
> +		bool "Kernel low-level debugging messages via SCIF2 on R7S9210"
> +		depends on ARCH_R7S9210
> +		help
> +		  Say Y here if you want kernel low-level debugging support
> +		  via SCIF2 on Renesas RZ/A2M (R7S9210).
> +
> +	config DEBUG_R7S9210_SCIF4
> +		bool "Kernel low-level debugging messages via SCIF4 on R7S9210"
> +		depends on ARCH_R7S9210
> +		help
> +		  Say Y here if you want kernel low-level debugging support
> +		  via SCIF4 on Renesas RZ/A2M (R7S9210).
> +
>  	config DEBUG_RCAR_GEN1_SCIF0
>  		bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
>  		depends on ARCH_R8A7778
> @@ -1537,6 +1551,8 @@ config DEBUG_LL_INCLUDE
>  	default "debug/msm.S" if DEBUG_QCOM_UARTDM
>  	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
>  	default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
> +	default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2
> +	default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4
>  	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
>  	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
>  	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
> @@ -1666,7 +1682,8 @@ config DEBUG_UART_PHYS
>  	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
>  	default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
>  	default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
> -	default 0xe8008000 if DEBUG_R7S72100_SCIF2
> +	default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
> +	default 0xe8009000 if DEBUG_R7S9210_SCIF4
>  	default 0xf0000000 if DEBUG_DIGICOLOR_UA0
>  	default 0xf0000be0 if ARCH_EBSA110
>  	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
> @@ -1699,6 +1716,7 @@ config DEBUG_UART_PHYS
>  		DEBUG_LL_UART_EFM32 || \
>  		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
>  		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
> +		DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
>  		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
>  		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
>  		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
> diff --git a/arch/arm/include/debug/renesas-scif.S b/arch/arm/include/debug/renesas-scif.S
> index 1c5f795587fc5681..25f06663a9a4e2c1 100644
> --- a/arch/arm/include/debug/renesas-scif.S
> +++ b/arch/arm/include/debug/renesas-scif.S
> @@ -11,7 +11,11 @@
>  #define SCIF_PHYS	CONFIG_DEBUG_UART_PHYS
>  #define SCIF_VIRT	((SCIF_PHYS & 0x00ffffff) | 0xfd000000)
>  
> -#if CONFIG_DEBUG_UART_PHYS < 0xe6e00000
> +#if defined(CONFIG_DEBUG_R7S9210_SCIF2) || defined(CONFIG_DEBUG_R7S9210_SCIF4)
> +/* RZ/A2 SCIFA */
> +#define FTDR		0x06
> +#define FSR		0x08
> +#elif CONFIG_DEBUG_UART_PHYS < 0xe6e00000
>  /* SCIFA */
>  #define FTDR		0x20
>  #define FSR		0x14
> -- 
> 2.17.1
>
Geert Uytterhoeven Aug. 21, 2019, 9:16 a.m. UTC | #2
On Wed, Aug 21, 2019 at 11:07 AM Simon Horman <horms@verge.net.au> wrote:
> On Wed, Aug 07, 2019 at 10:54:15AM +0200, Geert Uytterhoeven wrote:
> > Enable low-level debugging support for RZ/A2M (r7s9210).
> >
> > The RZA2MEVB board uses either SCIF2 (SDRAM enabled) or SCIF4 (HyperRAM
> > only) for the serial console.
> >
> > Note that "SCIFA" serial ports on RZ/A2 SoCs use a compressed register
> > layout, hence add support for that to renesas-scif.S.
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Thanks, queuing in renesas-devel for v5.4.

Gr{oetje,eeting}s,

                        Geert
diff mbox series

Patch

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 85710e078afb4878..9fe038aecc553deb 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -924,6 +924,20 @@  choice
 		  Say Y here if you want kernel low-level debugging support
 		  via SCIF2 on Renesas RZ/A1H (R7S72100).
 
+	config DEBUG_R7S9210_SCIF2
+		bool "Kernel low-level debugging messages via SCIF2 on R7S9210"
+		depends on ARCH_R7S9210
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF2 on Renesas RZ/A2M (R7S9210).
+
+	config DEBUG_R7S9210_SCIF4
+		bool "Kernel low-level debugging messages via SCIF4 on R7S9210"
+		depends on ARCH_R7S9210
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF4 on Renesas RZ/A2M (R7S9210).
+
 	config DEBUG_RCAR_GEN1_SCIF0
 		bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
 		depends on ARCH_R8A7778
@@ -1537,6 +1551,8 @@  config DEBUG_LL_INCLUDE
 	default "debug/msm.S" if DEBUG_QCOM_UARTDM
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
@@ -1666,7 +1682,8 @@  config DEBUG_UART_PHYS
 	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
 	default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
 	default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
-	default 0xe8008000 if DEBUG_R7S72100_SCIF2
+	default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
+	default 0xe8009000 if DEBUG_R7S9210_SCIF4
 	default 0xf0000000 if DEBUG_DIGICOLOR_UA0
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
@@ -1699,6 +1716,7 @@  config DEBUG_UART_PHYS
 		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
+		DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
 		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
 		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
diff --git a/arch/arm/include/debug/renesas-scif.S b/arch/arm/include/debug/renesas-scif.S
index 1c5f795587fc5681..25f06663a9a4e2c1 100644
--- a/arch/arm/include/debug/renesas-scif.S
+++ b/arch/arm/include/debug/renesas-scif.S
@@ -11,7 +11,11 @@ 
 #define SCIF_PHYS	CONFIG_DEBUG_UART_PHYS
 #define SCIF_VIRT	((SCIF_PHYS & 0x00ffffff) | 0xfd000000)
 
-#if CONFIG_DEBUG_UART_PHYS < 0xe6e00000
+#if defined(CONFIG_DEBUG_R7S9210_SCIF2) || defined(CONFIG_DEBUG_R7S9210_SCIF4)
+/* RZ/A2 SCIFA */
+#define FTDR		0x06
+#define FSR		0x08
+#elif CONFIG_DEBUG_UART_PHYS < 0xe6e00000
 /* SCIFA */
 #define FTDR		0x20
 #define FSR		0x14