[2/2] regulator: qcom-rpmh: Add support for SM8150
diff mbox series

Message ID 20190808093343.5600-2-vkoul@kernel.org
State New
Headers show
Series
  • [1/2] regulator: dt-bindings: Add PM8150x compatibles
Related show

Commit Message

Vinod Koul Aug. 8, 2019, 9:33 a.m. UTC
Add support from RPMH regulators found in SM8150 platform

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 147 ++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

Comments

Bjorn Andersson Aug. 9, 2019, 3:32 a.m. UTC | #1
On Thu 08 Aug 02:33 PDT 2019, Vinod Koul wrote:
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
[..]
> +static const struct rpmh_vreg_hw_data pmic5_bob = {
> +	.regulator_type = VRM,
> +	.ops = &rpmh_regulator_vrm_bypass_ops,
> +	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
> +	.n_voltages = 135,

There are 136 voltages in [0,135]

> +	.pmic_mode_map = pmic_mode_map_pmic4_bob,
> +	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
> +};
> +
[..]
> @@ -755,6 +890,18 @@ static const struct of_device_id rpmh_regulator_match_table[] = {
>  		.compatible = "qcom,pm8005-rpmh-regulators",
>  		.data = pm8005_vreg_data,
>  	},
> +	{
> +		.compatible = "qcom,pm8150-rpmh-regulators",
> +		.data = pm8150_vreg_data,
> +	},
> +	{
> +		.compatible = "qcom,pm8150l-rpmh-regulators",
> +		.data = pm8150l_vreg_data,
> +	},
> +	{
> +		.compatible = "qcom,pm8009-rpmh-regulators",
> +		.data = pm8009_vreg_data,
> +	},

Sort order...

>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);

Apart from these nits this looks good.

Regards,
Bjorn
Vinod Koul Aug. 9, 2019, 4:44 a.m. UTC | #2
On 08-08-19, 20:32, Bjorn Andersson wrote:
> On Thu 08 Aug 02:33 PDT 2019, Vinod Koul wrote:
> > diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> [..]
> > +static const struct rpmh_vreg_hw_data pmic5_bob = {
> > +	.regulator_type = VRM,
> > +	.ops = &rpmh_regulator_vrm_bypass_ops,
> > +	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
> > +	.n_voltages = 135,
> 
> There are 136 voltages in [0,135]

Oops, will send an update

> 
> > +	.pmic_mode_map = pmic_mode_map_pmic4_bob,
> > +	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
> > +};
> > +
> [..]
> > @@ -755,6 +890,18 @@ static const struct of_device_id rpmh_regulator_match_table[] = {
> >  		.compatible = "qcom,pm8005-rpmh-regulators",
> >  		.data = pm8005_vreg_data,
> >  	},
> > +	{
> > +		.compatible = "qcom,pm8150-rpmh-regulators",
> > +		.data = pm8150_vreg_data,
> > +	},
> > +	{
> > +		.compatible = "qcom,pm8150l-rpmh-regulators",
> > +		.data = pm8150l_vreg_data,
> > +	},
> > +	{
> > +		.compatible = "qcom,pm8009-rpmh-regulators",
> > +		.data = pm8009_vreg_data,
> > +	},
> 
> Sort order...

Yes will sort all entries.

> >  	{}
> >  };
> >  MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
> 
> Apart from these nits this looks good.

Thanks :)

Patch
diff mbox series

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index b2c2d01d1637..693ffec62f3e 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -637,6 +637,72 @@  static const struct rpmh_vreg_hw_data pmic4_lvs = {
 	/* LVS hardware does not support voltage or mode configuration. */
 };
 
+static const struct rpmh_vreg_hw_data pmic5_pldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 255, 8000),
+	.n_voltages = 256,
+	.hpm_min_load_uA = 10000,
+	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_pldo_lv = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(1504000, 0, 62, 8000),
+	.n_voltages = 63,
+	.hpm_min_load_uA = 10000,
+	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_nldo = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_drms_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 123, 8000),
+	.n_voltages = 124,
+	.hpm_min_load_uA = 30000,
+	.pmic_mode_map = pmic_mode_map_pmic4_ldo,
+	.of_map_mode = rpmh_regulator_pmic4_ldo_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_hfsmps510 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+	.n_voltages = 216,
+	.pmic_mode_map = pmic_mode_map_pmic4_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_ftsmps510 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 263, 4000),
+	.n_voltages = 264,
+	.pmic_mode_map = pmic_mode_map_pmic4_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(2800000, 0, 4, 1600),
+	.n_voltages = 5,
+	.pmic_mode_map = pmic_mode_map_pmic4_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
+static const struct rpmh_vreg_hw_data pmic5_bob = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_bypass_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
+	.n_voltages = 135,
+	.pmic_mode_map = pmic_mode_map_pmic4_bob,
+	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
+};
+
 #define RPMH_VREG(_name, _resource_name, _hw_data, _supply_name) \
 { \
 	.name		= _name, \
@@ -705,6 +771,75 @@  static const struct rpmh_vreg_init_data pm8005_vreg_data[] = {
 	{},
 };
 
+static const struct rpmh_vreg_init_data pm8150_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_hfsmps510,   "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_hfsmps510,   "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic5_ftsmps510, "vdd-s8"),
+	RPMH_VREG("smps9",  "smp%s9",  &pmic5_ftsmps510, "vdd-s9"),
+	RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_nldo,      "vdd-l6-l9"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l2-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,      "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo_lv,   "vdd-l7-l12-l14-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,      "vdd-l13-l6-l17"),
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l3-l4-l5-l18"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps510, "vdd-s2"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_ftsmps510, "vdd-s3"),
+	RPMH_VREG("smps4",  "smp%s4",  &pmic5_ftsmps510, "vdd-s4"),
+	RPMH_VREG("smps5",  "smp%s5",  &pmic5_ftsmps510, "vdd-s5"),
+	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps510, "vdd-s6"),
+	RPMH_VREG("smps7",  "smp%s7",  &pmic5_ftsmps510, "vdd-s7"),
+	RPMH_VREG("smps8",  "smp%s8",  &pmic5_hfsmps510, "vdd-s8"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_pldo_lv,   "vdd-l1-l8"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l2-l3"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l2-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l4-l5-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7-l11"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo_lv,   "vdd-l1-l8-l11"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,      "vdd-l9-l10"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l9-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l7-l11"),
+	RPMH_VREG("bob",    "bob%s1",  &pmic5_bob,       "vdd-bob"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_hfsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_hfsmps515, "vdd-s2"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l2"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l4"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo7",   "ldo%s6",  &pmic5_pldo_lv,   "vdd-l7"),
+	{},
+};
+
 static int rpmh_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -755,6 +890,18 @@  static const struct of_device_id rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pm8005-rpmh-regulators",
 		.data = pm8005_vreg_data,
 	},
+	{
+		.compatible = "qcom,pm8150-rpmh-regulators",
+		.data = pm8150_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8150l-rpmh-regulators",
+		.data = pm8150l_vreg_data,
+	},
+	{
+		.compatible = "qcom,pm8009-rpmh-regulators",
+		.data = pm8009_vreg_data,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);