diff mbox series

[03/22] ARM: omap1: move omap15xx local bus handling to usb.c

Message ID 20190808212234.2213262-4-arnd@arndb.de (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Arnd Bergmann Aug. 8, 2019, 9:22 p.m. UTC
The mach/memory.h file only exists to implement a dma offset for "Local
Bus" devices, and that consists of the OHCI USB controller for practical
purposes.

The generic dma-mapping interface has gained this exact feature some
years ago and can do it much more efficiently, so replace the complex
__arch_virt_to_dma/__arch_dma_to_pfn/... logic with a much simpler boot
time initialization.

This should also make any code that performs dma mapping calls at
runtime much more efficient, by eliminating the strcmp() along with
the computation.

Similar, a portion of the ohci-omap driver is just there for configuring
the memory translation, this too can get moved into usb.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-omap1/include/mach/memory.h   | 43 -----------
 arch/arm/mach-omap1/include/mach/omap1510.h |  1 -
 arch/arm/mach-omap1/usb.c                   | 79 +++++++++++++++++++++
 drivers/usb/host/ohci-omap.c                | 72 +------------------
 include/linux/platform_data/usb-omap1.h     |  2 +
 5 files changed, 83 insertions(+), 114 deletions(-)

Comments

Felipe Balbi Aug. 9, 2019, 5:32 a.m. UTC | #1
Arnd Bergmann <arnd@arndb.de> writes:

> The mach/memory.h file only exists to implement a dma offset for "Local
> Bus" devices, and that consists of the OHCI USB controller for practical
> purposes.
>
> The generic dma-mapping interface has gained this exact feature some
> years ago and can do it much more efficiently, so replace the complex
> __arch_virt_to_dma/__arch_dma_to_pfn/... logic with a much simpler boot
> time initialization.
>
> This should also make any code that performs dma mapping calls at
> runtime much more efficient, by eliminating the strcmp() along with
> the computation.
>
> Similar, a portion of the ohci-omap driver is just there for configuring
> the memory translation, this too can get moved into usb.c
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

For all of these patches related to usb:

Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>

Thanks for cleaning this up, Arnd.
Christoph Hellwig Aug. 10, 2019, 10:28 a.m. UTC | #2
Thanks for doing this!  The odd platforms have always been very
confusing.

> diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
> index 3d235244bf5c..7af9c0c7c5ab 100644
> --- a/arch/arm/mach-omap1/include/mach/omap1510.h
> +++ b/arch/arm/mach-omap1/include/mach/omap1510.h
> @@ -159,4 +159,3 @@
>  #define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
>  
>  #endif /*  __ASM_ARCH_OMAP15XX_H */
> -

Spurious whitespace change?

> diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
> index d8e9bbda8f7b..740c876ae46b 100644
> --- a/arch/arm/mach-omap1/usb.c
> +++ b/arch/arm/mach-omap1/usb.c
> @@ -10,6 +10,7 @@
>  #include <linux/init.h>
>  #include <linux/platform_device.h>
>  #include <linux/io.h>
> +#include <linux/delay.h>
>  
>  #include <asm/irq.h>
>  
> @@ -127,6 +128,7 @@ omap_otg_init(struct omap_usb_config *config)
>  
>  		syscon &= ~HST_IDLE_EN;
>  		ohci_device->dev.platform_data = config;
> +
>  		status = platform_device_register(ohci_device);

Same here.

> +#define OMAP1510_LB_OFFSET	   UL(0x30000000)
> +#define OMAP1510_LB_DMA_PFN_OFFSET ((OMAP1510_LB_OFFSET - PAGE_OFFSET) >> PAGE_SHIFT)

Overly long line.

> +/*
> + * OMAP-1510 specific Local Bus clock on/off
> + */
> +static int omap_1510_local_bus_power(int on)
> +{
> +	if (on) {
> +		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
> +		udelay(200);
> +	} else {
> +		omap_writel(0, OMAP1510_LB_MMU_CTL);
> +	}
> +
> +	return 0;
> +}

The caller never checks the const return value, and on is always true as
well.  In fact it seems like omap_1510_local_bus_power and
omap_1510_local_bus_init could probably just be merged into the caller.

> +
> +/*
> + * OMAP-1510 specific Local Bus initialization
> + * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
> + *       See also arch/mach-omap/memory.h for __virt_to_dma() and
> + *       __dma_to_virt() which need to match with the physical
> + *       Local Bus address below.

I think that NOTE is out of date, as __virt_to_dma and __dma_to_virt
don't exist anymore.

> +static int omap_1510_local_bus_init(void)
> +{
> +	unsigned int tlb;
> +	unsigned long lbaddr, physaddr;
> +
> +	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
> +	       OMAP1510_LB_CLOCK_DIV);
> +
> +	/* Configure the Local Bus MMU table */
> +	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
> +		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
> +		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
> +		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
> +		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
> +		       OMAP1510_LB_MMU_CAM_L);
> +		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
> +		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);

Another > 80 chars line.

> +		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
> +		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
> +	}
> +
> +	/* Enable the walking table */
> +	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);

One more.

> +	udelay(200);
> +
> +	return 0;

The return value is ignored.
diff mbox series

Patch

diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 1142560e0078..ba3a350479c8 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -9,47 +9,4 @@ 
 /* REVISIT: omap1 legacy drivers still rely on this */
 #include <mach/soc.h>
 
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
-#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-
-#define __arch_pfn_to_dma(dev, pfn)	\
-	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
-	   if (is_lbus_device(dev)) \
-		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
-	   __dma; })
-
-#define __arch_dma_to_pfn(dev, addr)	\
-	({ dma_addr_t __dma = addr;				\
-	   if (is_lbus_device(dev))				\
-		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
-	   __phys_to_pfn(__dma);				\
-	})
-
-#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
-						lbus_to_virt(addr) : \
-						__phys_to_virt(addr)); })
-
-#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
-					   (dma_addr_t) (is_lbus_device(dev) ? \
-						virt_to_lbus(__addr) : \
-						__virt_to_phys(__addr)); })
-
-#endif	/* CONFIG_ARCH_OMAP15XX */
-
 #endif
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index 3d235244bf5c..7af9c0c7c5ab 100644
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -159,4 +159,3 @@ 
 #define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
 
 #endif /*  __ASM_ARCH_OMAP15XX_H */
-
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index d8e9bbda8f7b..740c876ae46b 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -10,6 +10,7 @@ 
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <asm/irq.h>
 
@@ -127,6 +128,7 @@  omap_otg_init(struct omap_usb_config *config)
 
 		syscon &= ~HST_IDLE_EN;
 		ohci_device->dev.platform_data = config;
+
 		status = platform_device_register(ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
@@ -533,6 +535,80 @@  static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
 }
 
 #ifdef	CONFIG_ARCH_OMAP15XX
+/* OMAP-1510 OHCI has its own MMU for DMA */
+#define OMAP1510_LB_MEMSIZE	32	/* Should be same as SDRAM size */
+#define OMAP1510_LB_CLOCK_DIV	0xfffec10c
+#define OMAP1510_LB_MMU_CTL	0xfffec208
+#define OMAP1510_LB_MMU_LCK	0xfffec224
+#define OMAP1510_LB_MMU_LD_TLB	0xfffec228
+#define OMAP1510_LB_MMU_CAM_H	0xfffec22c
+#define OMAP1510_LB_MMU_CAM_L	0xfffec230
+#define OMAP1510_LB_MMU_RAM_H	0xfffec234
+#define OMAP1510_LB_MMU_RAM_L	0xfffec238
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus.
+ */
+#define OMAP1510_LB_OFFSET	   UL(0x30000000)
+#define OMAP1510_LB_DMA_PFN_OFFSET ((OMAP1510_LB_OFFSET - PAGE_OFFSET) >> PAGE_SHIFT)
+
+/*
+ * OMAP-1510 specific Local Bus clock on/off
+ */
+static int omap_1510_local_bus_power(int on)
+{
+	if (on) {
+		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
+		udelay(200);
+	} else {
+		omap_writel(0, OMAP1510_LB_MMU_CTL);
+	}
+
+	return 0;
+}
+
+/*
+ * OMAP-1510 specific Local Bus initialization
+ * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
+ *       See also arch/mach-omap/memory.h for __virt_to_dma() and
+ *       __dma_to_virt() which need to match with the physical
+ *       Local Bus address below.
+ */
+static int omap_1510_local_bus_init(void)
+{
+	unsigned int tlb;
+	unsigned long lbaddr, physaddr;
+
+	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
+	       OMAP1510_LB_CLOCK_DIV);
+
+	/* Configure the Local Bus MMU table */
+	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
+		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
+		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
+		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
+		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
+		       OMAP1510_LB_MMU_CAM_L);
+		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
+		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
+		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
+		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
+	}
+
+	/* Enable the walking table */
+	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
+	udelay(200);
+
+	return 0;
+}
+
+static void omap_1510_local_bus_reset(void)
+{
+	omap_1510_local_bus_power(1);
+	omap_1510_local_bus_init();
+}
 
 /* ULPD_DPLL_CTRL */
 #define DPLL_IOB		(1 << 13)
@@ -601,11 +677,14 @@  static void __init omap_1510_usb_init(struct omap_usb_config *config)
 		int status;
 
 		ohci_device.dev.platform_data = config;
+		ohci_device.dev.dma_pfn_offset = OMAP1510_LB_DMA_PFN_OFFSET;
 		status = platform_device_register(&ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
 		/* hcd explicitly gates 48MHz */
 	}
+
+	config->lb_reset = omap_1510_local_bus_reset;
 #endif
 }
 
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index d8d35d456456..f7efe65f01c5 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -40,17 +40,6 @@ 
 #include <mach/usb.h>
 
 
-/* OMAP-1510 OHCI has its own MMU for DMA */
-#define OMAP1510_LB_MEMSIZE	32	/* Should be same as SDRAM size */
-#define OMAP1510_LB_CLOCK_DIV	0xfffec10c
-#define OMAP1510_LB_MMU_CTL	0xfffec208
-#define OMAP1510_LB_MMU_LCK	0xfffec224
-#define OMAP1510_LB_MMU_LD_TLB	0xfffec228
-#define OMAP1510_LB_MMU_CAM_H	0xfffec22c
-#define OMAP1510_LB_MMU_CAM_L	0xfffec230
-#define OMAP1510_LB_MMU_RAM_H	0xfffec234
-#define OMAP1510_LB_MMU_RAM_L	0xfffec238
-
 #define DRIVER_DESC "OHCI OMAP driver"
 
 #ifdef CONFIG_TPS65010
@@ -113,61 +102,6 @@  static int omap_ohci_transceiver_power(int on)
 	return 0;
 }
 
-#ifdef CONFIG_ARCH_OMAP15XX
-/*
- * OMAP-1510 specific Local Bus clock on/off
- */
-static int omap_1510_local_bus_power(int on)
-{
-	if (on) {
-		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
-		udelay(200);
-	} else {
-		omap_writel(0, OMAP1510_LB_MMU_CTL);
-	}
-
-	return 0;
-}
-
-/*
- * OMAP-1510 specific Local Bus initialization
- * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
- *       See also arch/mach-omap/memory.h for __virt_to_dma() and
- *       __dma_to_virt() which need to match with the physical
- *       Local Bus address below.
- */
-static int omap_1510_local_bus_init(void)
-{
-	unsigned int tlb;
-	unsigned long lbaddr, physaddr;
-
-	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
-	       OMAP1510_LB_CLOCK_DIV);
-
-	/* Configure the Local Bus MMU table */
-	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
-		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
-		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
-		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
-		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
-		       OMAP1510_LB_MMU_CAM_L);
-		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
-		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
-		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
-		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
-	}
-
-	/* Enable the walking table */
-	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
-	udelay(200);
-
-	return 0;
-}
-#else
-#define omap_1510_local_bus_power(x)	{}
-#define omap_1510_local_bus_init()	{}
-#endif
-
 #ifdef	CONFIG_USB_OTG
 
 static void start_hnp(struct ohci_hcd *ohci)
@@ -237,10 +171,8 @@  static int ohci_omap_reset(struct usb_hcd *hcd)
 
 	omap_ohci_clock_power(1);
 
-	if (cpu_is_omap15xx()) {
-		omap_1510_local_bus_power(1);
-		omap_1510_local_bus_init();
-	}
+	if (config->lb_reset)
+		config->lb_reset();
 
 	ret = ohci_setup(hcd);
 	if (ret < 0)
diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h
index 43b5ce139c37..878e572a78bf 100644
--- a/include/linux/platform_data/usb-omap1.h
+++ b/include/linux/platform_data/usb-omap1.h
@@ -48,6 +48,8 @@  struct omap_usb_config {
 	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
 
 	int (*ocpi_enable)(void);
+
+	void (*lb_reset)(void);
 };
 
 #endif /* __LINUX_USB_OMAP1_H */