[04/19] dt-bindings: phy-mmp3-usb: Add bindings
diff mbox series

Message ID 20190809093158.7969-5-lkundrak@v3.sk
State New
Headers show
Series
  • Initial support for Marvell MMP3 SoC
Related show

Commit Message

Lubomir Rintel Aug. 9, 2019, 9:31 a.m. UTC
This is the PHY chip for USB OTG on MMP3 platform.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 .../devicetree/bindings/phy/phy-mmp3-usb.txt     | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt

Comments

Rob Herring Aug. 21, 2019, 9:13 p.m. UTC | #1
On Fri, Aug 09, 2019 at 11:31:43AM +0200, Lubomir Rintel wrote:
> This is the PHY chip for USB OTG on MMP3 platform.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  .../devicetree/bindings/phy/phy-mmp3-usb.txt     | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
> new file mode 100644
> index 0000000000000..b9623b98151bc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
> @@ -0,0 +1,16 @@
> +Marvell MMP3 USB PHY
> +--------------------
> +
> +Required properties:
> +- compatible: must be "marvell,mmp3-usb-phy"
> +- #phy-cells: must be 0
> +
> +Example:
> +	usb-phy: usbphy@d4207000 {

usb-phy@...

> +		compatible = "marvell,mmp3-usb-phy";
> +		reg = <0xd4207000 0x40>;
> +		#phy-cells = <0>;
> +	};
> +
> +This document explains the device tree binding. For general information
> +about PHY subsystem refer to Documentation/phy.txt

Drop this statement.


> -- 
> 2.21.0
>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
new file mode 100644
index 0000000000000..b9623b98151bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-mmp3-usb.txt
@@ -0,0 +1,16 @@ 
+Marvell MMP3 USB PHY
+--------------------
+
+Required properties:
+- compatible: must be "marvell,mmp3-usb-phy"
+- #phy-cells: must be 0
+
+Example:
+	usb-phy: usbphy@d4207000 {
+		compatible = "marvell,mmp3-usb-phy";
+		reg = <0xd4207000 0x40>;
+		#phy-cells = <0>;
+	};
+
+This document explains the device tree binding. For general information
+about PHY subsystem refer to Documentation/phy.txt