[v5,03/18] thermal: fix indentation in makefile
diff mbox series

Message ID 20190810052829.6032-4-tiny.windzz@gmail.com
State New
Headers show
Series
  • add thermal driver for h6
Related show

Commit Message

Frank Lee Aug. 10, 2019, 5:28 a.m. UTC
To unify code style.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
 drivers/thermal/Makefile | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Zhang Rui Aug. 28, 2019, 12:40 p.m. UTC | #1
On Sat, 2019-08-10 at 05:28 +0000, Yangtao Li wrote:
> To unify code style.
> 
> Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>

the later patches in this series does not change Makefile.
So this seems to be a cleanup patch independent of this patch set.
It's better to remove this patch from this patch series.

thanks,
rui
> ---
>  drivers/thermal/Makefile | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index fa6f8b206281..d7eafb5ef8ef 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -5,7 +5,7 @@
>  
>  obj-$(CONFIG_THERMAL)		+= thermal_sys.o
>  thermal_sys-y			+= thermal_core.o
> thermal_sysfs.o \
> -					thermal_helpers.o
> +				   thermal_helpers.o
>  
>  # interface to/from other layers providing sensors
>  thermal_sys-$(CONFIG_THERMAL_HWMON)		+= thermal_hwmon.o
> @@ -25,11 +25,11 @@ thermal_sys-$(CONFIG_CPU_THERMAL)	+=
> cpu_cooling.o
>  thermal_sys-$(CONFIG_CLOCK_THERMAL)	+= clock_cooling.o
>  
>  # devfreq cooling
> -thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
> +thermal_sys-$(CONFIG_DEVFREQ_THERMAL) 	+= devfreq_cooling.o
>  
>  # platform thermal drivers
>  obj-y				+= broadcom/
> -obj-$(CONFIG_THERMAL_MMIO)		+= thermal_mmio.o
> +obj-$(CONFIG_THERMAL_MMIO)	+= thermal_mmio.o
>  obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
>  obj-$(CONFIG_SUN8I_THERMAL)     += sun8i_thermal.o
>  obj-$(CONFIG_ROCKCHIP_THERMAL)	+= rockchip_thermal.o
> @@ -50,7 +50,7 @@ obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-
> thermal/
>  obj-y				+= st/
>  obj-$(CONFIG_QCOM_TSENS)	+= qcom/
>  obj-y				+= tegra/
> -obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
> +obj-$(CONFIG_HISI_THERMAL)     	+= hisi_thermal.o
>  obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
>  obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
>  obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o

Patch
diff mbox series

diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index fa6f8b206281..d7eafb5ef8ef 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -5,7 +5,7 @@ 
 
 obj-$(CONFIG_THERMAL)		+= thermal_sys.o
 thermal_sys-y			+= thermal_core.o thermal_sysfs.o \
-					thermal_helpers.o
+				   thermal_helpers.o
 
 # interface to/from other layers providing sensors
 thermal_sys-$(CONFIG_THERMAL_HWMON)		+= thermal_hwmon.o
@@ -25,11 +25,11 @@  thermal_sys-$(CONFIG_CPU_THERMAL)	+= cpu_cooling.o
 thermal_sys-$(CONFIG_CLOCK_THERMAL)	+= clock_cooling.o
 
 # devfreq cooling
-thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
+thermal_sys-$(CONFIG_DEVFREQ_THERMAL) 	+= devfreq_cooling.o
 
 # platform thermal drivers
 obj-y				+= broadcom/
-obj-$(CONFIG_THERMAL_MMIO)		+= thermal_mmio.o
+obj-$(CONFIG_THERMAL_MMIO)	+= thermal_mmio.o
 obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
 obj-$(CONFIG_SUN8I_THERMAL)     += sun8i_thermal.o
 obj-$(CONFIG_ROCKCHIP_THERMAL)	+= rockchip_thermal.o
@@ -50,7 +50,7 @@  obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
 obj-y				+= st/
 obj-$(CONFIG_QCOM_TSENS)	+= qcom/
 obj-y				+= tegra/
-obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
+obj-$(CONFIG_HISI_THERMAL)     	+= hisi_thermal.o
 obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
 obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
 obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o