| Message ID | 20190810052829.6032-16-tiny.windzz@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | add thermal driver for h6 | expand |
Hi, On Sat, Aug 10, 2019 at 05:28:26AM +0000, Yangtao Li wrote: > From: Icenowy Zheng <icenowy@aosc.io> > > The H5 temperature calculation function is strange. Firstly, it's > segmented. Secondly, the formula of two sensors are different in the > second segment. > > Allow to use a custom temperature calculation function, in case of > the function is complex. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> When you send a patch on someone else's behalf, you need to put your Signed-off-by as well. > --- > drivers/thermal/sun8i_thermal.c | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c > index 3259081da841..a761e2afda08 100644 > --- a/drivers/thermal/sun8i_thermal.c > +++ b/drivers/thermal/sun8i_thermal.c > @@ -76,6 +76,7 @@ struct ths_thermal_chip { > u16 *caldata, int callen); > int (*init)(struct ths_device *tmdev); > int (*irq_ack)(struct ths_device *tmdev); > + int (*calc_temp)(int id, int reg); > }; > > struct ths_device { > @@ -90,9 +91,12 @@ struct ths_device { > > /* Temp Unit: millidegree Celsius */ > static int sun8i_ths_reg2temp(struct ths_device *tmdev, > - int reg) > + int id, int reg) > { > - return (reg + tmdev->chip->offset) * tmdev->chip->scale; > + if (tmdev->chip->calc_temp) > + return tmdev->chip->calc_temp(id, reg); > + else > + return (reg + tmdev->chip->offset) * tmdev->chip->scale; You're not consistent here compared to the other callbacks you have introduced: calibrate, init and irq_ack all need to be set and will fail (hard) if you don't set them, yet this one will have a different behaviour (that behaviour being to use the H6 formula, which is the latest SoC, which is a bit odd in itself). I guess we should either make it mandatory as the rest of the callbacks, or document which callbacks are mandatory and which are optional (and the behaviour when it's optional). Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c index 3259081da841..a761e2afda08 100644 --- a/drivers/thermal/sun8i_thermal.c +++ b/drivers/thermal/sun8i_thermal.c @@ -76,6 +76,7 @@ struct ths_thermal_chip { u16 *caldata, int callen); int (*init)(struct ths_device *tmdev); int (*irq_ack)(struct ths_device *tmdev); + int (*calc_temp)(int id, int reg); }; struct ths_device { @@ -90,9 +91,12 @@ struct ths_device { /* Temp Unit: millidegree Celsius */ static int sun8i_ths_reg2temp(struct ths_device *tmdev, - int reg) + int id, int reg) { - return (reg + tmdev->chip->offset) * tmdev->chip->scale; + if (tmdev->chip->calc_temp) + return tmdev->chip->calc_temp(id, reg); + else + return (reg + tmdev->chip->offset) * tmdev->chip->scale; } static int sun8i_ths_get_temp(void *data, int *temp) @@ -108,7 +112,7 @@ static int sun8i_ths_get_temp(void *data, int *temp) if (!val) return -EAGAIN; - *temp = sun8i_ths_reg2temp(tmdev, val); + *temp = sun8i_ths_reg2temp(tmdev, s->id, val); /* * XX - According to the original sdk, there are some platforms(rarely) * that add a fixed offset value after calculating the temperature @@ -232,7 +236,7 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev, for (i = 0; i < tmdev->chip->sensor_num; i++) { int reg = (int)caldata[i + 1]; - int sensor_temp = sun8i_ths_reg2temp(tmdev, reg); + int sensor_temp = sun8i_ths_reg2temp(tmdev, i, reg); int delta, cdata, offset; /*